HT204382 hi , i have this extension .f4v ,and i couldn't match it with any think please help me , thank u
hi , i have this extension .f4v ,and i couldn't match it with any think please help me , thank u
http://en.wikipedia.org/wiki/Flash_Video
Similar Messages
-
Looking for help to unfreeze my 13 inch MacAir. I have tried powering down holding the power button. Force quit is not working. This is my first time here, so looking for help to,unfreeze my laptop. Thanks to all that can help.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??
Has your phone been jailbroken? If so, you will likely never get it to work again.
You can try placing your phone in DFU mode (search google) and restoring. -
My iphone 4 is taking forever to sync...I let it sync all night and only completed about 1/4 of of the songs downloaded. Apps seem to be fine. I have tried restoring it and that didn't do anything. Can someone please help?
how many songs are syncing cuz i only have at most 200 or so and it takes a while so it might be how many songs are syncing to the device
-
On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.
Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.
-
Hello my name is amer and i live in iran and i have one iphone lock.but my country limited us very very.and we are very poor and dont can pay money to unlock my iphone.please help me.thank you very math.my s/n iphone is: 012652000197750.my email iS: [email protected] please help me im very poor.im student and dont have money to keep on.
Only your cell service provider can unlock the phone. We cannot help you with that.
BTW, you should not provide information on your serial number or email address in an open forum. -
When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X. All my photos are on there. Please help. Thank you.
Did you upgrade to a new MacOS X version? Then you need to update iPhoto as well.
Only iPhoto 9.6 is compatible with MacOS X 10.10 Yosemite. Update from the Mac App Store.
Backup your iPhoto library, if you do not have a current backup.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Check the "Updates" tab of the App Store for an iPhoto update and run the update.
When you laugh iPhoto after the update, it will warn you, that the library needs upgrading, That may take a while.
Just in case that you see a warning, that the update is not possible because of an error message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put iPhoto back, if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/ -
My MacBook get's hot really quick and then discharge's quickly without opening any program, please help.
I have checked the cooling fan, and it's working, and I took it to an IT technician and he said my hardware is allright, so is it a problem from the OS it self??
OS X(10.8.5)Restart with the Option key held down and the Mac OS X install disk inserted, provide the firmware password, click on the DVD, press the button with the straight arrow, access the firmware settings, disable the password, and use FireWire Target Disk mode. If you can't do that or it doesn't work, contact Apple.
(38384) -
I deleted my extensions manager and now my Mac won't start up. Please Help!!
I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch -
I purchased an iphone 3g that was to be open to any carrier, I went to restore it to my itunes account and get a 1015 error, can this be fixed. I am new to the iphone and like the product but cannot buy new. Please help. THANKS
You got ripped off. You bought a hacked/jailbroken phone. That's what error 1015 means. Return it and get your money back if possible and buy a phone from a legitimate source.
Discussing jailbroken / hacked phones is forbidden by the terms of service. Jailbreaking / hacking voids any warranty and forfeits your right to support here or from Apple. You can not get help here. -
While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
but the "auto" button is grayed out and will not allow any auto function to take place.
Please help!
Thank you,
MikeMike, are you working with raw images?
For some raw images auto exposure is not available, have a look at this manual page:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs. -
Hi I live in Iran and I forgot the answer to the security question please help me thanks
Hi I live in Iran and I forgot the answer to the security question please help me thanks
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.
This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
I have upgraded to io6 and can no longer play gnomevillage. Can anyone please help me? Thanks.
I have upgraded to io6 and can no longer play gnomevillage. Can anyone help please. Also I have changed my password on the desktop (which I knew) but now when I log into the ipad it says I dont know my password.
Kurt Lang wrote:
Quark XPress 8 has a few of those PPC only tools, too. Like they they forgot to update them or something.
They were already at v9 when Lion came out and decided that official support would be for v9 only; see here.
According to this, the only thing PPC in v9 and v8 are video encoding for SWF export -- looks like an XTension according to System Profiler. Given their position of not officially supporting v8.x in Lion, that will probably always remain broken in v8. I use v8.5.1 in Lion; works fine for me -- I don't do any SWF exporting.
I have a few other things on my MBP, recently upgraded to Lion; I upgraded just about every app to the latest versions with exception of Quark. The only other PPC things besied that XTension are some scripts from Adobe Illustrator CS5.1, which got installed with CS 5.5. I guess Adobe forgot to upgrade those. No biggie, I never use them. -
My computer crashed and was not fixable. I have since bought a MacBookPro but I can not sync my iPhone to it as it wants to erase all of my music and videos. Please help!!
Roaminggnome's answer is neither strictly accurate nor is it especially helpful. There exist a number of third party applications that are neither supported nor endorsed by Apple, but that once installed on your new MacBook will allow you to download your files from your iPhone. Just Google "back-up music from iPhone" and you should get a range of products to choose from.
And after you've bought and downloaded one of them and restored your iTunes content, go an buy an external drive to back-up your iTunes library -
I have just installed iOS7 and i can't connect to itunes store. Please help.
i have just installed iOS7 and i can't connect to the itunes store. Please help.
Hi P.Rose,
If you're unable to connect to the iTunes Store, try these steps:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Cheers,
- Ari
Maybe you are looking for
-
"please wait while windows configures iTunes"
I get this message almost every time I start iTunes. It has been run several times, but will pop up often enough to be really bothersome. I run vista. Does anyone know what's wrong and how to fix it? Thanks
-
Seems odd that it only happens to one entry. I have an entry for "wnyc fm" streaming radio station, every now and then I'll go back to look for it and the name has changed to a generic "my station". Also, sometimes when the streams stall, it'll advan
-
We are in the beginning stages of our Oracle XML Gateway project and have made no customizations to out-of-the-box expected functionality of XML gateway product. Currently using Oracle 11.5.7 and RDBMS 8.1.7.3.0 when running ecxver.sql, results indic
-
Automatic return after keyboard entry
Hello, I want to know if I always have to press the 'enter' key in the program that I've written if I know how long the entry should be that I will enter (length of 1 char). Or can I do something other like a timeout ( if no key is pressed for a peri
-
I Just tried to open a premiere elements 10 project in premier pro cs6
I Just tried to open a premiere elements 10 project in premier pro cs6 but gave me this message. Please help.