HT2515 I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?
I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?
Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.
Similar Messages
-
How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?
This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.
-
my itunes keeps telling me its gonna erase my library if i try to add music. is it gonna erase everything like it already has or just the none existant music that is on my phone
If you have all of your music in your iTunes library you have nothing to worry about. Even if syncing wipes your music off your phone it will restore it again during the sync process. If you have non-purchased music on your phone that is not in your iTunes library, these songs will be lost. If you have purchased music on your phone that isn't in your iTunes library, you can transfer these by right-clicking on your phone in iTunes and selecting "Transfer Purchase" prior to syncing (and even if they are erased they can be redownloaded for free).
-
i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?
i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks -
I own a MacBook Pro laptop, an iPhone5 and an iPad mini with an itunes and apple account. I just purchased another iphone5 for my wife. What is the best way to sync and share iTunes music, iCal dates on her phone and my computer and devices? We don't need to sync and share contacts.
Jordans374 wrote:
Both are already synced to a windows laptop?
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?
What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on. -
My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.
-
I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
I have 2 iphones in the family and want to use itunes match on both devices, unfortunately my husband has his own itunes acct and when i change on his phone to my itunes acct it states that the email is already in use, any help on how to get the itunes match to go onto both devices, thanks
"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks -
I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460) -
I have problem in restoring my iphone. I broke the iphone contract in USA and came to India. I got steps to unlock in a mail and i followed those steps. When i try to restore using itunes then it always says some message like "turn off find my phone." How can i get rid of this message.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702
Note:
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?
All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately. -
Hi, My friend bought MacBook Pro for me online (USA) cost 1199.00 $ But he said that it costed more because there was some fees. Is it true? He said it's around 75$ more. Tell me if my friend is cheating on me or if it's true what for are fees ? Thanks
Where the confusion is ruzlis, is that when you purchase with Apple online in the UK, the product already shows the VAT of 20% being charged so the price you see is the price you pay, whereas in USA the Tax will be added later according to the zip code, and a further charge of environmental charges. These extra charge of $75 looks right to me. You are still getting it cheaper from the USA than if you bought in the UK.
I think you need to trust your friend a little more.
And of course if your friend ships it to you, then you still have the VAT to pay as it comes across the border.
Maybe you are looking for
-
Calling function in validation
Hi, I created an item level validation. I have a database side function which checks to make sure username/password is valid. Under validation type I choose "Function returning boolean" Here is what it looks like edumet_auth('[email protected]','temp
-
I have a JTable that is created by a ResultSetTableModel class as shown below. I have written code to insert, delete, update, and reset the the rows in this table, which then updates a database. However, when the table is in editing mode, and i hit e
-
System object for BI 7.0
Hi ALL, When creating Iview using BW webtemplate in portal 7.0 using BI 7.0.It is not prompting to select the system .. where as for 3.5 it will propmt to select system ... for BI 7.0 where exatcly we specify the system .
-
Process Flow deployment - getting RTC-5161 (10gR2)
I am trying to deploy a process flow and getting: "RTC-5161: The Deployment cannot proceed because of an error during the generation or pre-deployment phase. ....." Has anybody else experienced this? Right I am not sure what the problem might be. The
-
Container MigrationContainer is not active at the moment
Hi All, Below mentioned error encountered while deploying SAP-CRMDIC component using the file SAPCRMDIC17_0-10002941.SCA. It ended up in "ERROR" status in JSPM. Problem might be due to the "inactive container". Could you please let me know a easiest