HT2527 when I connect my iphone 4s to my computer itunes does not come up I try to sync manually and it does not work I also go into my setting and general and itunes i have a message that says sync will resume when "D3N23RB1" is available no sure how to
i am trying to sync my iphone 4s with itumes when I connect with the cord to my computer itunes does nto recognize it. So I go into settings on my phone and then general and itunes to try and sync wireless and it says Sync will resume when "D3N23RB1 is available how do I fix this
Hello Zozo1799,
I understand that your iPhone 4s is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.
Similar Messages
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!
If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios. -
can anyone help with a question regarding my iphone. I have unlocked and restored my phone as suggested and now I get a message that says activation error. I am unable to do anything with my iphone
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts. -
I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store on your computer. You must verify your payment info before you can make purchases. I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped
If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes
Upgrade iTunes to the latest version. It should be 10.5.3.
-
I am in China. When I plug in my powerblock i get a green light for 10-15 seconds then it turns orange. It seems to feed power but not charge the battery. i have a message that says the battery is not charging.
Do these
https://support.apple.com/kb/HT3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/TS1713
https://support.apple.com/kb/ht1509
could be the power isn't sufficient, use another location
make a note of any results you get and post them -
I just updated my Ipad and I have a message that says "cannot back up" and nowv it is frozen and won't allow me to do anything. I can't even shut the Ipad off.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
When I try to reinstall Itunes, I get the message that says "runtime error". What to do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
i have a message that says "not enough storage space this ipad cannot be backed up because there is not enough cloud storage. The message will not close so I cannot use the ipad.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.
A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
In my itunes account I have a message, that I have 1 awaiting download, when I push then button nothing happens.
That sounds like the "90 day switch" rule related to changing Apple IDs. Whenever you enable automatic downloads, turn on iTunes Match or download previous purchases your device or computer becomes "associated" with the ID currently in use. Once associated in this way you cannot change to another ID for a period of 90 days (read more here: http://support.apple.com/kb/HT4627). I suspect this rule was necessary to prevent piracy as it prevents one from quickly signing into a number of their friend's IDs and download their purchased content.
Maybe you are looking for
-
HOW CAN I GET THE TIME IN EXCEL SHEET USING WRITE TO MEASUREMENT INSTRUCTION
HI, I am using GET TIME IN SECONDS ,and after that i placed SECONDS TO DATE /TIME instruction ,and i had taken a write to measurement file instruction to get the time in excel sheet. Now i am not able to connect write to measurement source to seconds
-
ADF Mobile: WebService data control method call with array
JDev 11.1.2.3 ADF Mobile deployed to Android emulator Hello All, I am trying to invoke a method in my Web Service data control and get the following exception Caused by: ERROR [oracle.adfmf.framework.exception.AdfInvocationRuntimeException] - Cannot
-
Project unable to save/release
Dear anyone, As we have created a complete Project but at the time of release/save it shows the following error msg. 1 WBS Element VEPL/C/MTRX_IT 2 Enter an existing allocation structure 3 WBS Element VEPL/C/MATRIX 4 Enter an existing allocation stru
-
X230 received, few issues (keyboard, screen). Thoughts?
First, it arrived with a broken key (left Ctrl fell out when I opened the lid). I have a new keyboard on order (they said 2 business days to arrive), so no biggie there. But is the keyboard issue common? Second, the screen has a bright spot in the
-
Dear All Techies , I'did like to ask about the tuning methodologies which I can use for packaged applications .As we our using the application developed by fedalio technologies , which uses the thin java based cliend to access the oracle 8i database