HT3231 Would it fatally interrupt my migration if I didn't set those settings and my computer went to sleep during the process?

help.

Why would you not want to set them and then find out? If Apple advises not to let the computer go to sleep when it is inactive during Migration, it probably will and mess things up. So just temporarily set it to never sleep and set it back to your usual setting when the migration is done.

Similar Messages

After I updated my phone I lost all my pictures and the new apps I downloaded. I would really love my pictures back does anyone know how? It said that the backup failed during the process. Is it all lost?

I went to update my phone and after the update I recieved a message that it failed and that the back up failed. I had to restore my phone to stock. I just want to know if there was a possibility to get my pictures back. I tried to get my phone to restore from my last back up but it wouldn't do that either. Does anyone have any ideas. I am really only worried about my pictures and videos I had a couple hundred and they were important.

Thank you. I have been reading about a lot of these occurances and many people have been able to get their pictures back through iexplorer however I am unable to. The error number I got was 50 or something like that. I have a feeling I will not be able to get the pictures back because it said the backup failed after the update failed.

Had an iPhone 4 updating the OS when it was interrupted by the computer going to sleep and now is frozen on "plug into iTunes" screen. Home/Power button combo will not reset, iTunes does not acknowledge the phone is plugged in.

I recently upgraded to the 5s, so I delegated my old iPhone 4 to a music player/daughter checking instagram and email. Three days ago I plugged the iPhone 4 into iTunes to update it, the OS began updating. During the update my computer went into sleep mode, interrupting the OS update. Now the phone will not do anything but show the screen with the graphic indicating to plug the phone into iTunes. I've tried a hard reset (holding down power button/home button), plugging the phone into iTunes before/during holding down the home button, holding down the buttons for various lengths of time in various permutations according to info I've found online, etc, and nothing happens beyond a brief showing of the Apple logo and then back to the same screen. iTunes will make a connection noise when the phone is plugged in but otherwise makes no indication that a device is plugged in (no iPhone button in the tool bar, etc.). Any ideas or do I need to take it to an actual Apple store and hope they don't tell me it is completely bricked?

Yep, done all that. Repeatly. Don't get any sort of recovery mode message or the phone showing up on iTunes at all. iTunes is most current version, all diagnostics show everything fine, and it works fine with my current phone. Just....nothing.

How to detect BO modified objects during the migration?

Hi experts,
We migrated from BO XI Prod to 4.1 des environment. Later, we need to upgrade from des to prod. During the process the user can continue works, we manage an audit report to identify all objects had been modified during this period. Is there any other way to detect them on upgraded process?
Thank you

Hello,
I think you can write a query like this in QueryBuilder :
SELECT si_name,si_creation_time, si_update_ts FROM CI_INFOOBJECTS where SI_KIND in ('FullClient','Webi','Pdf','Excel') and si_update_ts>'2014/05/06'
Change the timestamp for the upgrade time.
Regards,

I would like to uninstall my product from one computer as I am in teh process of giving it to someone else and then re-installing it on another computer. How do I do that?

I would like to uninstall my product from one computer as I am in the@ process of giving it to someone else and then re-installing it on another computer. How do I do that?

manzonia
What version of Premiere Elements is involved? And, what computer operating system?
Strictly from the point of view of removing a version no longer wanted on a computer, Deactivate and then Uninstall which are not the same
a. In an opened project, Help Menu/Deactivate or Help Menu/Sign Out (depends on version)
b. Then uninstalling from the computer the usual Control Panel way (assumes Windows).
Please also refer to
Transfer an Adobe product license
Adobe allows you to use the same purchased activation serial number for a given Premiere Elements version on no more than two of your computers.
And, written here by others, not both at the same time.
ATR

HT4889 what is included when you migrate users, settings and other files?

When you use the Migration Assistant, what is included in "users," "settings" and "other files"?

I think it's offered as an option at some point during the installation. But you can always start the Migration Assistant at any later point (it's located in Applications/Utilities) - that's the same application.
That's what I did, actually. I did a clean install first and only after everything was up and running did I hook up my old G4 and transferred things over with the help of the Migration Assitant.

Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences

can I interrupt a migration from Mac Book Pro to iMac and what are the consequences

Les:
Here are some options:
• You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
• You can use an application like Log Me In to access your home computer from your laptop.
• You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
Please do post back with further questions or comments.
cornelius

Is it possible to resume migration assistant after the process has been interrupted?

My son interrupted the migration process between an older and my new MB Pro. Can't seem to get the process to resume. Is it possble to resume? or to restart? Is it OK to use thunderbolt-to-thunderbolt?

goodprogramming wrote:
It's not the file that is set to read-only at the OS level. The signature field has an event for signed. Once that occurs I have the checkbox selected that says mark all fields as read-only. I want to be sure it is really read-only and that there is no way to make it non-read-only.
save as does not change the read onlyness of the pdf. I have tried this.
It shouldn't matter.
Making changes to the file after the signature is added will invalidate the signature. You'll know someone has been messing around if the sig is invalidated.
Even if you have a reason to do what you want, you can't. At least not without a very expensive Digital Rights Management solution plus a server to run it.

Can I change the way that I connect my two computers using migration assistant whithout interrupting the process

I am in the process of using Migration Assistant to transfer my 2008 MacBook Pro to my MacBook Pro with Retina. I am currently using USB to transfer and it is taking a long time (as expected). I am trying to increase the speed of this process. Am I able to connect ethernet to thunderbolt without stopping the process? Can I just plug in the cable and not have the hault the process, but speed it up? Thanks!!!

Since you're just sending data, it won't "mess" things up, but you "may" have some cleanup on your hands, depending on what's been transferred. If you want to stop: Command + Q on both machines.

Migration from WLI2.0 to WLI2.1 - problems and solutions

We have experienced a number of issues when migrating from WLI2.0 (no service packs)
to WLI2.1 - We are only using the WLPI (BPM) part of WLI. We decided to publish
these issues in case they can be of help to others.
Problems:
1. The documentation (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#998197)
says the migration process works from WLPI 1.2.1 and from WLI 2.0 (SP2, 3, 4).
What about WLI2.0 with no service packs - I don't see why BEA should have left
out migration from that platform. We decided to follow the process and see what
happened.
2. There is no indication in the documentation of how to run the GUI based migration
tools on Unix, only for Windows so we had to follow the manual route.
3. The Manual process refers (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#999969)
to the DB variable setting scripts. It then says to run "migratedb.sh". None of
these files have extensions ".sh" - the files that were installed have no extension.
Obviously that did not stop us running them but the documentation needs correcting.
4. The migratedb scripts calls "WLI_HOME/setenv.sh" - it is confusing that there
is a second copy of this file in the bin folder called "setenv". Why are there
2 copies. Also I note that the one in bin is executable and the other is not.
All very confusing!!
5. The migratedb script fails to run because we have not previously run setDomain.
This is not documented.
6. Running setDomain on a domain moved from a WLI2.0 installaion fails since it
does not contain the expected folders. That basically means you cannot migrate
such a domain. We carried on with the process using the bpmdomain so that we could
at least migrate our database automatically.
7. Having run setDomain, we tried migratedb again but it failed because we had
not run switchdb. Again, this is not documented. We ran switchdb successfully.
8. Now running migratedb creates a file called "migrate.sh". Unfortunately the
script migratedb then attempts to run a file called "migrate". This is evidence
that no-one has ever tested this script at BEA and we are very disconcerted by
this fact!! We renamed the script and ran migratedb again - this time it ran the
migrate script.
9. This still fails with the following errors (when calling migrateCommonRep)
     -v (No such file or directory)
     null
     java.lang.NullPointerException
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at com.bea.eci.migration.Migrate.getConnection(Migrate.java:207)
     at com.bea.eci.migration.Migrate.main(Migrate.java:73)
     java.lang.NullPointerException
     at com.bea.eci.migration.Migrate.main(Migrate.java:192)
10. It also fails because it cannot find "sqlplus" - a fatal problem - we do not
have sqlplus installed on the same machine as WLI and yet again this requirement
is not documented. At this point we gave up trying to run the migrate script as
there seemed to be no route forward.
The process we took to move from WLI2.0 (WLPI only) was as follows:
a. Since we had done no changes to filerealm.properties we simply copied the one
fron bpmdomain into our own domain.
b. We have been unable to run the step to migrate the common repository (see note
9). If this is referring to the XML repository then that should not be a problem
to us as we have not used it.
c. We moved the "migrate/BPM_20SP3-21.sql" script to an NT machine and ran that
script on our database. This seems to have successfully updated the database.
Lastly, having completed the migration process we tried to run the server but
it fails. This is because the startWeblogic script fails to call checkdomain properly.
We modified the line to become:
     ". $WLI_HOME/bin/checkdomain"     # the '.' was missing
Does anyone else have any experiences with this that would help us all?
Pete

Pete,
Please post this to the weblogic.integration.interest and weblogic.integration.developer newsgroups?
Pete Edwards wrote:
We have experienced a number of issues when migrating from WLI2.0 (no service packs)
to WLI2.1 - We are only using the WLPI (BPM) part of WLI. We decided to publish
these issues in case they can be of help to others.
Problems:
1. The documentation (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#998197)
says the migration process works from WLPI 1.2.1 and from WLI 2.0 (SP2, 3, 4).
What about WLI2.0 with no service packs - I don't see why BEA should have left
out migration from that platform. We decided to follow the process and see what
happened.
2. There is no indication in the documentation of how to run the GUI based migration
tools on Unix, only for Windows so we had to follow the manual route.
3. The Manual process refers (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#999969)
to the DB variable setting scripts. It then says to run "migratedb.sh". None of
these files have extensions ".sh" - the files that were installed have no extension.
Obviously that did not stop us running them but the documentation needs correcting.
4. The migratedb scripts calls "WLI_HOME/setenv.sh" - it is confusing that there
is a second copy of this file in the bin folder called "setenv". Why are there
2 copies. Also I note that the one in bin is executable and the other is not.
All very confusing!!
5. The migratedb script fails to run because we have not previously run setDomain.
This is not documented.
6. Running setDomain on a domain moved from a WLI2.0 installaion fails since it
does not contain the expected folders. That basically means you cannot migrate
such a domain. We carried on with the process using the bpmdomain so that we could
at least migrate our database automatically.
7. Having run setDomain, we tried migratedb again but it failed because we had
not run switchdb. Again, this is not documented. We ran switchdb successfully.
8. Now running migratedb creates a file called "migrate.sh". Unfortunately the
script migratedb then attempts to run a file called "migrate". This is evidence
that no-one has ever tested this script at BEA and we are very disconcerted by
this fact!! We renamed the script and ran migratedb again - this time it ran the
migrate script.
9. This still fails with the following errors (when calling migrateCommonRep)
-v (No such file or directory)
null
java.lang.NullPointerException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at com.bea.eci.migration.Migrate.getConnection(Migrate.java:207)
at com.bea.eci.migration.Migrate.main(Migrate.java:73)
java.lang.NullPointerException
at com.bea.eci.migration.Migrate.main(Migrate.java:192)
10. It also fails because it cannot find "sqlplus" - a fatal problem - we do not
have sqlplus installed on the same machine as WLI and yet again this requirement
is not documented. At this point we gave up trying to run the migrate script as
there seemed to be no route forward.
The process we took to move from WLI2.0 (WLPI only) was as follows:
a. Since we had done no changes to filerealm.properties we simply copied the one
fron bpmdomain into our own domain.
b. We have been unable to run the step to migrate the common repository (see note
9). If this is referring to the XML repository then that should not be a problem
to us as we have not used it.
c. We moved the "migrate/BPM_20SP3-21.sql" script to an NT machine and ran that
script on our database. This seems to have successfully updated the database.
Lastly, having completed the migration process we tried to run the server but
it fails. This is because the startWeblogic script fails to call checkdomain properly.
We modified the line to become:
". $WLI_HOME/bin/checkdomain" # the '.' was missing
Does anyone else have any experiences with this that would help us all?
Pete--
Developer Relations Engineer
BEA Support

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

WSUS Server settings and Migrating SCCM 2007 Clients to SCCM 2012 R2

I am in the process of migrating a site from SCCM 2007 to SCCM 2012 R2.
Whilst doing this I came across the following issue:
The first issue is the workstations are woefully out of date, patch and update-wise, some have never had a patch applied as the branch IT staff are building them from the original disk. The policy is set in the SCCM 2007 client to point the machines at
the 2007 WSUS server, which is not set to deliver any updates to 2007 clients and hasn't been for a while. So as soon as the client is installed they lose the ability to get updates from Microsoft and don't get them from the 2007 WSUS server either.
Issue number 2 is the machines are a mixture of hand-built machines to SCCM 2007 delivered images, the SCCM image is patch using offline patching so they are somewhat up-to-date, but the hand-built machines are not and as there is no standardization on
the Microsoft Update client settings, the IT person on-site sets it to whatever he/she feels like, as it makes no difference once the client is installed and the policy applied.
So, when I come to update the client from 2007 to 2012, the following occurs
The Client uninstalls, and the GPO policy settings for Windows Update are removed.
Depending on the setup of the client initially, some machines are then going to Microsoft for their updates (literally 100s) and although the new client is installed the policy update does not fire to update the Windows Update Policy settings, sometimes
for hours after the install finishes. My thoughts are that it just can't run the policy as it is bogged down by patches updating and, in some cases, rebooting and then updating some more.
As a workaround I have had to go in an physically disable Microsoft Update on these machines, which stops the downloading and eventually allows the policy to apply, after which the machine then begins to receive patches from WSUS in a controlled method during
maintenance windows.
I have tried a number of approaches, even setting the Global Group Policy for Windows Update, but the install still removes the keys and basically sets Windows updates back to whatever it was set before the policy was applied and stays that way until the
new client is installed and the Machine policy reapplied. This can be speeded up by initiating it on the client obviously, but that would mean going to each client or using right-click tools on each machine, which is not an option.
What I would like to know is if there is something I am missing from my methods or is it just that I have never been on a site with such out of date workstations built in such different ways.
Any help would be appreciated.

First note that clients do *not* get updates from WSUS in ConfigMgr. The Windows Update Agent (WUA) must point to the WSUS integrated into ConfigMgr (by virtue of having the SUP installed on it) but this is only to make the update catalog/metadata available
to it. Approving updates in WSUS is unsupported for ConfigMgr.
What you've described above is all working as designed although these clients are falling into a gap between the 2007 and 2012 configuration and thus they are reaching out to Windows Update during this gap and installing updates. To prevent this, you
need to disable automatic updates via a domain group policy. This will prevent all automated WUA activity including installing updates from any source automatically. This will not interfere with ConfigMgr Software Updates in any way though.
Jason | http://blog.configmgrftw.com | @jasonsandys

Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

Hi,
Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
I am facing some migration/compatibility issues between Adobe Flash CS3 Professional and Adobe Flash Professional CS5:
I am working on a project that has been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 / Flash Player 10) to compile the FLA files, it is creating some new issues like some customized radio buttons are getting disappeared while viewing the SWF on a web page etc.
So, I would like to know:
1) Is there any migration/compatibility issue between Adobe Flash CS3 Professional and Adobe Flash Professional CS5?
2) If yes: Is there any patch available from Adobe for it?
3) If no: What could be the causes and the best possible solutions for it?
Any help and support would be highly appreciated. Many thanks in advance!
Thanks & Regards
Amit

Apparently some people have issues, but I don't think it is across the board. Here's a link to another recent posting that may or may not prove helpful to you...
http://forums.adobe.com/thread/776615?tstart=60

Migrating settings and library from Lightroom 4.4 to 5

I Just istalled Lightroom 5 and I would like my settings and stuff to be just like in 4.4, how do I transfer or migrate my setting, preferences, Libraries...? Do I need to start from scratch again?

Hi Lavigne.G,
You might want to refer the docs :
http://helpx.adobe.com/lightroom/kb/catalog-faq-lightroom.html
http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer
< Moving the discussion to Lightroom forums >

HT3231 Would it fatally interrupt my migration if I didn't set those settings and my computer went to sleep during the process?

Similar Messages

Maybe you are looking for