I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!
Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!
hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!
Similar Messages
-
I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?
If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If not, you can't use the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(119278) -
My update failed and now my phone is frozen with the apple symbol
I was updating my iPhone and it failed and now my phone is frozen with the Apple Icon. It wont turn off or anything
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?
My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?
-
i hit the clear setting and content on my phone and now my phone is stuck on the apple sign and wont turn on or off
You will probably have to put it in recovery mode to restore it, as explained in this guide: http://support.apple.com/kb/ht1808.
-
I was udating my iphone 4 software on itunes, it got all the way to the end, my phone switched off then it said error could not download software and now my phone is frozen on the start screen????
Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I bought this phone on ebay and it's still in great condition, charged up quickly, and seems to be working fine except for this one thing. I factory reset it and plugged it into my Mac and nothing happened. No charging sound - nothing. I contacted the seller and she mentioned that maybe it isn't compatible with a higher version of itunes since the phone hasn't been updated? That doesn't seem right but I would hate to think that I just wasted my money. Could it possibly be an internal problem? Any help would be much appreciated seeing as I don't have an Apple store anywhere near me.
Yes, I have the current version of itunes. I charge my ipod and digital camera with the same USB ports and I've never had a problem with them. Woops, when I said 'computer' I was just referring to my Mac again. Sorry for the confusion. But yes. I even tried using my ipod cord with it to no avail.
-
I've just installed an apple security update released today I think. On restart it is stuck on the grey apple page. How do I recover from this? Do I gave to wait for battery to run flat? Don't want to press and hold power button in case cause damage.
This may help.
https://discussions.apple.com/message/21000506#21000506 -
I have a n IPhone 4S. I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.
I tried to do the same, but couldn't find ios 6. I even tried the APPstore, to download the last IOS6 version.
The most problem is the running out of the battery.
I've checked each app who is "eating" the most power.
The battery stoped runaway, when I closed the weather service....
So for now, I will use regular internet service, and probbaly will do to more app.
Until, finaly, I will find my self with all the applications closed....:-)
That will be the sign, to replace my phone to anderoid....:-)
Till now, there is no any sign from Apple to have a glance to our complanes. -
i upgraded my iphone 4 ios and now my phone will not restore -
I have run into the same problem.
1. I was sharing the same itunes account with my wife for both of our iPhones 4s. She upgraded her phone to IOS7 two weeks before I did. After I did we ran into problems with messaging. Because we shared itunes account, both iphones were linked. When I sent text messages to someone, she got a copy. When they replied, she got a copy. I tried several ways to remove her phone from my profile, but would not work with new IOS7. I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
2. I backed up my phone onto itunes before setting up seperate itunes account. It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
4. Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
5. I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times. The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup. It does not matter which I select. It prompts me to connect to iTunes again. The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings.
For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device? -
Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it
updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried? -
Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes
The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
Clearly state the Troubleshooting Steps you have tried to Resolve it -
My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it???? As soon as I remove it from the computer it goes completly off again???????
Hey beaches37,
Thanks for the question. I understand you are experiencing issues with your iPhone 5s. You mentioned you received an error when attempting to restore. If you remember this error, the following article may help to resolve it:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Furthermore, you may want to try restoring your iPhone in recovery-mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
HT4623 I upgraded to ios7 and now my phone won't restart
I upgraded to ios7 and now my phone won't restart
Hi there ttillberg,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.
Maybe you are looking for
-
REG:RUN TIME ERROR WHILE CREATING USERS
HI ALL, When i am trying to crreate a new user in sap system ecc6.0 with mssql. an sysntax error is accuring in the system Syntax error in program "SAPLBUPA_INTERFACE_SERVICE ". The current ABAP program "SAPLBUPA_INTERFACE_OUTBOUND" had to be termina
-
I can not access Skype account on your desktop through outlook Account
-
Dear Friends I develop one application in which i use servlet/jsp . I develop my application on JBoss-Tomcat and Mysql combination . My application run perfectly on JDK1.3 . Last night i install jdk1.4 and Start my jboss server . i got following erro
-
Dear all gurus, How to increase the value limit in MIRO? Upesh
-
Another one with much higher BB usage than normal
Hi, This is probably going to sound familiar to lots of people, but we also are recording much higher BB usage than normal. We are only on the 10gb package, as our max 512kb broadband doesn't make it worthwhile trying to do much with the www. Our usa