HT3275 I am using an external drive for backup. I am now getting a message that the drive needs a disk repair, but when I run disk repair it just seems to freeze.
I am using an external drive for back up. Yesterday the backup failed and I received a message that the external drive( a passport drive) needed a 'disk repair", when I ran disk repair nothing happened it seemed to freeze. Suggestions? should i simply erase the external drive and start over-my computer is fine.
Get a different drive for backup.
In the meantime, once you are backed up some drive safe, then you can attempt to repair the backup drive using the repair the directory link.
Similar Messages
-
I bought a used iPhone on ebay. when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password. I have no way of knowing who the owner is. How can I get around this?
Check the eBay listing. Did it state the device was Activation Locked? If not, then make a claim as Meg stated and get a refund. You will not be able to activate the phone and no one can help you contact the owner, unless that is the person that sold the device. If they cannot remove the phone from their account because it is not theirs, then refund is your route. Even Apple cannot assist with locating the previous owner.
-
I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
I am running Firefox 10 on my MacBook Pro. I have tried several times to download the Firebug addon, but get the following message:
"The addon could not be downloaded because of a connection error on Mozilla.addons.org"Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
-> right-click somewhere, click '''New''' -> select '''String'''
* name it '''xpinstall.enabled''' and set the value to '''True'''
-> Close the '''about:config''' tab and then Restart Firefox.
All the downloads should work now. If you delete this value some time later it still works.
Check and tell if its working. -
when I use my apple id to open I cloud I get a message that says id is correct apple id but not aa icloud id. This keeps me from dowloading previous purchases that I have lost when new ones sync on my ipod. anyway to correct this?
If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
-
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
I have an old Ipad and an IPad Air. I used one Apple ID for both IPads. Now I wish to split the iCloud storage and separate the two. I want to change my new IPad Air to a New Apple ID. How do I do it?
Go to Settings > iCloud > Delete Account, and enter your Apple ID password. Then sign in with the new ID.
NOTE: "Delete Account" just means it will be deleted from the iPad. The account itself will not be deleted. -
I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer available. My MacBook continues to print ok. Any ideas?
Reboot everything. Router, printer and pad. If it used to work, it will again. It just lost itself somewhere.
-
I charged my nano on my work PC, when i went to use it at home it is now unresponsive and I get a message that the device cannot be recognized by windows? How do I restore it
Try placing the iPod in recovery mode (I think that is what you were try to do) and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP. -
I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.
Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay -
I bought an Adobe writer program a few years ago,and have have had no problem saving information I've added to pdf forms. For some reason, I can no longer save the information that I've entered. In fact, I get a message that the information will NOT be saved. How can I correct this? Thanks!
Hey louiseg45826294,
Thank you for posting on Adobe forums.
Could you please let me know what Adobe Writer program you are talking about. Is it Adobe Acrobat or Reader?
Could you please share the screenshot of the exact error message that appears.
Are the PDF forms saved on your computer's local drive?
Hope to hear from you.
Regards,
Anubha -
When I tried to use my saved credit card, I made an error & it didn't work. Now, although the error is corrected, I keep getting a message that the card is declined. Can I fix this, or will the error time out?
Hello KGDJ,
Thanks for using Apple Support Communities.
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message
For more information on this, take a look at:
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
Best of luck,
Mario -
I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro. what do i do now?
Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I recently downloaded to Maverick. Now when I try to add mucis from iTunes to a movie I am making, I get a message that the files are prtected and unavailable. This never happened to me before. How do I correct this problem?
Well, it sounds as if you are trying to violate copyright protections - trying to use music that you purchased for individual use in a way that is not permitted.
The fact that you were able to do this before would not change the fact that it is not allowed.
Maybe you are looking for
-
Hi, Ok, I'll preface this by saying there's a lotta code pasted in here but it really quite an easy question, I just need to post all the code so you understand where what came from. Now.............the question I'm trying to do is to create an apple
-
Conversion of fixed length flat files to oracle table
hello friends Please help me getting the code for conversion of fixed length flat files to oracle table Should the tables be pre-defined ????? In this case the de-limiters are variable length spaces and not commas.Please help me with the same Regards
-
Document Type for Consignment-related invoice
hi , I i've changed the document type in OMR4 for consignment invoice ,but when MRKO generates the document show a error message that this document is not allow. What is wrong ?? Thaks Tatiana
-
Website a mess in IE5, 6, 7
Its the typical story, the website I am working on looks great in Safari/Firefox, but doesn't seem to render the same in IE5-7, most notably the nav bar is out of place. How can I fix this? Should I even care about IE5 and 6? Attached is the CSS code
-
6330 LE3 - ata mode vs performace problems
note: see sig for specs. alright, so here a little while back, my main hard drive (the 10gig) has started to perform like it's in PIO mode, yet everything i run to test it says it's using ata(/dma)66 mode. my secondary is using ata100 and runs fine.