HT3702 I need to cancel an application from Sing. I'm not happy with the service. It does attend my needs. I really need to cancel it. And I'm having trouble to do it. Help!!!
Hi, I had download the application from Sing. Well, I'm not happy with the service.. Plus I'm been charge every week for a service that I'm not using. I'm been trying to surch for "How to cancel a service", and it seems to be hidding somewhere. Can any one tell me how or what should I do to cancel it?
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Similar Messages
-
My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.
Is your iPhone connected to your computer using the lightning cable or are you doing WiFi sync?
Sometimes the iPhone doesn't show up in the side bar if you're using WiFi syncing, if its not working, then be connected to your WiFi on your phone and on your computer (Same network) let me know how it's going, if it doesn't work still. Turn your phone off and on again and put in your pass code then try to sync it (keep your phone unlocked and not in sleep mode) tel me if it appears in the side bar. -
I'm cancel my itune pay ment so now they won't let me update all my app. What's happen, I
Not happy with the automatic payment system with ur apple.
TinaTinango wrote:
Not happy with the automatic payment system
What is wrong with paying for something at time of purcahse? -
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
am just ****** n not happy with my iphone 5 does this happened to any one else its just lose n rattle from every where power button volume rocker its very annoying every time it vibrates or am talking to some 1 on the phone lil loude..
It looks this community is not active or the support team don't have time to provide their inputs for the problems posted on this community.
-
Why is the album art from our iTunesU site not downloading with the content?
Recently, the album art from our iTunes U site has not been downloading with the content. We have tried downloading content from other pages and we get the album art, but when we download out own content the album art does not download with the files. The art appears in the iTunes store so there should not be a problem with the files. Any idea why this is happening? Here is the link to the iTunes U page for your information.http://itunes.apple.com/gb/institution/university-of-london/id422825754
Here is the link to the iTunes U page for your information. http://itunes.apple.com/gb/institution/university-of-london/id422825754
-
Can't find out how to organize my bookmarks. can't do it after updating. Person tried to help, we had long conversations, I sent lots of images, it got to where I think the answer given were not related to the problem. I asked for help from a technician or to give my emails to one. She won't do it and I can't get help. So I'm starting over. It shouldn't be this hard. I need someone else to help me.
re: How do I organize and delete bookmarks in my short toolbar list.
* https://support.mozilla.com/en-US/questions/884877
You say you have a lot of duplicate bookmarks, and want to know how to organize bookmarks, but from the pictures shown, I really only see a news subscription, some sample bookmarks in the bookmarks toolbar that you don't display on the toolbars so I don't see point in deleting anything there most of it are reports from the database or from a news subscription nothing of much concern, really. I would dump the news subscription if you don't use it.
How do you want to arrange your bookmarks, but you must keep within some boundaries of what was expected of the three major folders.
Bookmarks Menu -- this is your folder categorized bookmarks, originally all bookmarks were in this folder and the bookmarks toolbar was one folder within -- that has changed.
Bookmarks Toolbar -- intended to be visible on the toolbar with main bookmarks and folders spread out horizontally to save one level of drilling down into folders, with very few bookmarks and folders visible on the toolbar but quickly accessed. You can use the bookmarks showing essentially as buttons a few primary bookmarklets. You can have folder structure there so you could actually have thousands of bookmarks there within folders.
Unsorted Bookmarks (no folders within by intent not by restriction) -- new concept to not categorize bookmarks into folders because of bookmark tagging. Delicious.com will show you what they intended where you have lots of people. I think the concept of tagging breaks down with one person. The other reason bookmarks no longer had to be put into folders was the "AwesomeBar" feature of Firefox that is a great feature it will find bookmarks whatever folder they are in -- I hope you are familiar with it. You can throw bookmark separators into any folder but they are especially useful in the unsorted bookmarks folder, especially if you sort the folder. In other words a group probably within a date range.
So how do you see yourself categorizing your bookmarks ?
I'd like to get an idea of '''how many bookmarks '''you have altogether and how big your places.sqlite file is. To find out how many bookmarks you have all together bring up the Bookmarks Library list, place a colon (":") into the search field this will do a find on all of your bookmarks. At the bottom of the library window you will see the total number of bookmarks you may have to nudge the vertical scrollbar down, and as long as no bookmarks are selected you will see an '''item count'''.
Open your profile folder Help > Troubleshooting information... then click on "Open containing folder" then looking in bookmarkbackups folder and report size of last .json file in there -- hope you can see the extension the filenames have dates.
From the library list you can see if you actually do have a lot or any duplicated by eyeballing the list sorted by the location. You don't want to delete anything yet until you know what you want to do and what folders the bookmarks actually in, as you would not want to delete a categorized bookmark for an uncategorized one.
I have 1256 bookmarks, a bookmarks backup file (.json) is 1849 KB.
I have 750 of those bookmarks have a keyword shortcut -- most of my bookmarks may not actually be bookmarks to webpages.
Install the "Show Parent Folder" extension, it would be important for manually categorizing and deleting bookmarks.
*https://addons.mozilla.org/firefox/addon/show-parent-folder/
At some point you will want to install the "Sort Places" extension that allows you to sort folders recursively in a matter of seconds. Only sort when you want to sort, never automatically.
* https://addons.mozilla.org/firefox/addon/sortplaces/
Other extensions of interest for working with bookmarks are included in
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
The columns in the bookmarks library list that I show are
:Name, Location, Parent Folder, visit date, visit count, Keyword, Description, Last Modified
The important columns for eliminating duplicates are
:Name, Location, Parent Folder, Keyword, Description
:if you have Tags then that column would also be important not to delete the bookmark
Sort on Location look for duplicates, expect you won't find as many as you thought you would, because Firefox makes it difficult to create duplicates if you use the bookmarks star. I wouldn't delete any until you really know what you want to do, if you have duplicate you would not want to delete one a primary location based on parent directory or the one you use with a keyword.
I don't really think you have much to delete in your toolbars list, they are basically examples. Would highly recommend you keep something in the bookmarks toolbar even though you are not displaying it.
The only case of having major duplicates are if you have imported bookmarks at the bottom of your bookmarks menu also named bookmarks menu or something similar. You would see that in the parent folder column -- you cannot sort on the parent folder column. -
I am so not happy with the new changes especially when it come to the ability to change background colours, fonts and font sizes/ colours... Does Apple really think that their only audience is the young cool crowd or people who do not have a visual impairment. Think before you make changes to your software and programs. You WILL lose more people to androids if you continue this way.
At least give users the ability to make apps like notes their owned by allowing them to pick the style, theme, background and colour, font size and colour.
A very ****** off Apple user who is now looking at Androids.Hi Tricia,
I'm sorry but I don't see an ideal way to do this. Is it the yellow label text, e.g: "New" against the white background which is causing the difficulty?
The only way I've found of getting the colors to change in Notes is via Settings>General>Accessibility>Invert Colors but then it looks like something has barfed all over your screen.
I'd be very, very surprised if Apple do not fix this, firstly because I believe "Accessibility" is a legal matter and secondly because they will not want to cause difficulty for their customers. We have to remember that this is a major, major overhaul of iOS, it has essentially been taken back to the drawing board and done from scratch again, it may take a little time, but I'm sure they will fix these issues.
Regards,
Steve -
Guys, good evening!
What is the most recently (or the best) iOS for the iphone 3G?
Nowadays, I'm using the 4.2.1, but I'm having some problems to install apps from Apple Store because this iOS is not compatible with the apps.
Thank you very much...Thank You Niel!
And if I install another version (eg 4.3), can I damage my iphone?
This is the version required by the Apple Store when I try to install apps.
For you understand better my problem, I'm not able to install simple apps like facebook and skype
What do you advise me to do?
Best regards,
Jocemar -
I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.
For FREE do the following:
When you get to othe part of the video you want a still shot from, put the video on pause.
Take a screen shot: Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab. Will do the above with just a single click.
If you still want to purchase software, suggest that you do a Google & MacUpdate search. This way, you can find exactly what you want. -
It seems volatile memory is lost on the PCI GPIB Card. When the system returns from power-save, I cannot get to my GPIB instruments. I have to close the application and restart it. I've tried unregistering and reregistering the gpib globals and resetting the device interfaces (reissuing the ibdev command) without luck. I am using Visual Basic 6, but I also get the Measurement and Automation Explorer to fail in the same way, so I don't think it is my development environment.
On Sat, 15 May 2004 20:23:58 -0500 (CDT), SQP Products wrote:
>PCI-GPIB does not like returning from computer power-save mode. I
>need to restart the application. Uggh! Customer not happy.
>
>It seems volatile memory is lost on the PCI GPIB Card. When the
>system returns from power-save, I cannot get to my GPIB instruments.
>I have to close the application and restart it. I've tried
>unregistering and reregistering the gpib globals and resetting the
>device interfaces (reissuing the ibdev command) without luck. I am
>using Visual Basic 6, but I also get the Measurement and Automation
>Explorer to fail in the same way, so I don't think it is my
>development environment.
Can you change your power save settings? What operating system
are you running?
Also, some BIOS's have options for power save. For example, recent
IBM's can be set to maintain power to all peripherals, or only to main
memory. Of course, you would want it to maintain power.
I suspect the GPIB board and its driver are completely unable to
handle power save operation. It probably was never considered while
it was being designed.
Aidan Grey -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!
Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling -
My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!
Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.
Maybe you are looking for
-
InDesign CS3 program will not open - Win XP - after trying to open corrupt file.
Help! the program Adobe InDesign will not open up anymore. Here is the story and what I have tried. One week on the 16th my server crashed two of the three hard drives failed (RAID) I had the two replaced. Since then all seamed to be ok but few of fi
-
Need help in makinga message dialog box dissapear automaticly
hi i have the following code that displays a message dialog box that tells me when a user is online. how do i make it disapear automaticly after say, 5 seconds.on msn messenger a similar technique is used where when a user comes online, a message box
-
How can I make an array of strings?
-
Dynamic runtime shared libraries in Flash
Runtime shared libraries in Flash only seem to work if there is a direct import link into the file that wishes to use the shared library item. Why can't the main swf dynamically load a shared.swf containing the shared library items into itself and th
-
Why does adobe illustrator cs6 trial version keep uninstalling after restart?
I have downloaded the trial version of adobe illustrator, I do my work turn my computer off, the next day the file has no icon and will not load when clicked upon. Any help with this?