Directly launch the object if only one result is found (SEARCH_AUTONAV )

Hi All
We are on CRM 7.0 EP1, and I read an article in CRMEXPERT that one of the improvements in CRM 7.0 would be to jump to the object directly if only one result is found. For example, if I know the sales order number I can open it directly by putting the SO number in search field 'Sales Order' and instead of giving me the result list, the system will directly open the sales order.
The parameter to used for this is SEARCH_AUTONAV in function profile.But when I test this it is not working.I did not found any documentation about this parameter on help.sap or internet.
Any idea about this parameter and how to use it?
Or is there anyway to achieve what I am looking for?
Thanks in advance for your help
Swapnil

Hello Swapnil,
I'm not sure that SEARCH_AUTONAV is a desired parameter. But there is an improvement request which SAP has introduced by the [Note 1602520 - Improvement requests: Central Edit Button, One hit display|https://service.sap.com/sap/support/notes/1602520].
Also for tehcnical basis please refer to [Note 1548131 - CC1: Automatic navigation to search result (technical basis)|https://service.sap.com/sap/support/notes/1548131].
In general it's all about ONE_HIT_DIRECT_DISPL parameter.

Similar Messages

Entering details screen when only one result is found

Dear Forum,
I have a an application where one of the requirements is this:
Is there a way to accomplish that when you search for a record on the masterscreen and only one result is found, the details are showed right away?
Your help is much appreciated.
Arjen

Lucas,
It didn't work with my version of JHeadStart. I still use 10.1.2.0 build 19.
I tried to override the method you mentioned. This didn't work. I then got a strange error about viewobject names. Then I tried to fake the new JhsDataAction by recompiling it with the following addition to the method you mentioned:
} else if (rowCount==1) {
ActionForward inputForward = daContext.getActionMapping().getInputForward();
if (inputForward!=null)
inputForward.setName("oneRowFound");
daContext.setActionForward(inputForward);
That didn't work either.
I looked in the source of the existing JhsDataAction, and saw that the executeAdvancedSearchBinding method IS called by the onQuickSearch and onAdvancedSearch methods. Is this what's in the new JhsDataAction, or am I doing something wrong?
Thanks in advance,
Arjen

How do I display AS3 Object in only one state?

I created a AS3 object from a SWFLoader class as an animation, which I then place in a Flex stage. I need to display the object programmatically in only one state but there is no "includeIn()" method to include it in just one state.
Right now, it is showing up on all of the flex states. I add this object at different times and positions in the state. Everything is fine except it displays in all the states.
How do I display a AS3 object in only one state?
Thank you.

When i use visible property as you suggested, it works, but only on one object. I am generating more than one of these objects, so there could be 3 or 4, etc of these objects displaying concurrently at different x y positions in the state.
Is there a way to grab all of the objects created by this AS3 class at once and apply the visible property?
thanx

URL to directly launch the Contribution console for a particular site

Looking for the URL that will directly launch the Webcenter Sites Contribution console for a particular site. Can we have such a URL (might be with site id and/or any other parameter) that will directly take us to that site when we launch http://<host>:<port>/cs/...?....
Thanks
Arijit

Understood. Good question. You certainly won't be the last one to ask that. The short version is "I don't know", but the longer version is that it's possible to figure it out.
The contributor UI is set up so that you can override any element you want. You're going to want to figure out which session variable is set to hold the site id - it's probably "pubid". Then, create a dedicated CSElement/SiteEntry pair that is the URL that you redirect to. Then element does nothing but pre-set pubid to what you want, and then calls the "front door" the UI. At that point, the framework should pick up the newly set pubid and you're off to the races.
Caveat - I haven't tried this on the contributor UI yet but it works beautifully on the advanced UI to do all sorts of things - like creating a URL directly to an asset's edit screen etc.
Good luck!

Can I use Google Sync to transfer only my contacts from my IPhone 4 to my gmail acct? I don't want to sync info from Gmail to the IPhone. Can the sync work only one-way? I have 0 contacts on my gmail as I'll only use it as a back-up 4 my IPhone contacts.

Can I use Google Sync to transfer only my contacts from my IPhone 4 to my gmail account? I do not want to sync info from Gmail to the IPhone. Can the sync work only one-way? I have 0 contacts & 0 calendar events on my gmail account. I opened the Gmail account specifically to for the Google Sync and wil only be using this account as a back-up for my IPhone contacts. Please Help!!

You do realize that the SIM only contains account information for your wireless account.
Moving the SIM from phone to phone does not cause any of your iTunes content, contacts, email, etc to magically appear on the device.

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

What is the importance of Only One Business Partner Allowed

Hi all,
We know that the Relation between BP and Contract account is :
1 BP : n CA.
If the above relation is true, I would like to know the importance of the configuration "Only One Business Partner Allowed" in the below path:
Financial Accounting(New) >>Contract Acounts and Recievables>>Basic Functions >>Contract Accounts >>Field Modifications>>Configure Field Attributes for Contract Account Category.
If we don't check the field for "Only One Business Partner Allowed" , Does it contradict to the 1BP : n CA relation ?
Regards,
Sai
Edited by: kantesai on Aug 10, 2011 10:35 PM

n BP : n CA relation is possible.
One BP must be account holder from all BPs of CA. Rest of BPs can be Alternate Account, Spouse etc.
Please check table FKKVKP from technical perspective, as both BP and CA are primary key. If it was 1 BP : n CA then there would have only VKONT been as primary key.
Thanks,
Murtuza

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

I have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

i have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

my imei is 356955067431598 iphone 6 space grey 16gb

Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Hi there, im also having this problem, i tried running most of the games on my system, and some that are considered "high end" games, are giving me the exact same problem, but other games are running and im able to message fine, i also got some friends to send me messages, and i can recieve messages perfectly, also i noticed moving the actual window around on the screen or just closing down skype also lags. I have 16GB of ram and 4.4Ghz Octa-Core CPU, i checked my load while on the high end games and it there was more than enough hardware usage left like normal for skype to run, and skype wasnt taking any extra up than before. I also checked by bandwidth and i was having no problems with that as skype would lag even on offline games.
I have tried re-installing under a different directory and still the same problem persists, this has only been a problem within the last 24hrs and i haven't installed any other programs that could affect this at the moment.
*UPDATE* I tried downgrading to an older version of skype, 6.3.0.107. Problem Still persists

WIP according local GAAP vs IFRS - only one result analysis key

Dear experts,
I am faced with the following issue. We use WBS-elements for long running activities. We set result analysis key on WBS-element for periodic WIP calculation. The actual result analysis key is set up according local GAAP.
Now we want to implement parallel accounting according IFRS. Here we can use percentage of completion for valuation of our project(s).
How can we handle two methods of WIP calculation? We can only set one resulat analysis key on WBS element?
How do you handle this issue.
Thanks for your reply in advance
Regards,
Butch

Thanks for the quick feedback.
Maybe some additional information:
01 - IFRS (real time link with FI)
02 parallell currency deprec area
20 - LOCAL GAAP
50 - Grants IFRS value (investment measure support area) linked realtime to FI
51 parallel currency deprec area of 50
60 - Grants Local GAAP
I already checked the SAP library and the SDN forum, but could not find anywhere how to set up the depreciation area(Grants LOCAL GAAP) to which the investment measure is not directly linked to (not the support area (50) in Tr ANVEST).
Is it possible with only one investement key to fill the IFRS (50) & Local GAAP (60) value investment depreciation area and still depreciate them in different ways?
Thanks again!
Kr,
Roeland

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.

There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Can use the internet but only one computer at a time...

I have a very old PC with no ethernet ports and i have one macbook pro. I just bought an airport base station and have connected it to my modem via an ethernet cable, and the modem is then connected to my PC via USB.
This set up allows me to connect wirelessly with my macbook pro, but if i want to connect to the net via my PC it won't let me...unless i turn off the base station and then reboot the modem. but now i can't connect wirelessly.
Apple guys say, because I'm not connected directly to the PC from the base station (due to no ethernet ports) I'll never get round this problem. Before I give up, is there any thoughts on how i can resolve this catch 22?
Macbook Pro Mac OS X (10.4.6)

When I encountered the same problem a while back, I discovered that I had mistakenly connected the ethernet cable from my modem into one of the <-----> (ethernet) port on the back of my Airport instead of the O (WAN) port.
It belongs in the O port.
I hope your problem is this simple to solve.

Directly launch the object if only one result is found (SEARCH_AUTONAV )

Similar Messages

Maybe you are looking for