HT3728 I have a time capsule set up as my wireless & use a Macbook air
This wifi setup works perfectly.
However, I am now trying to configure my old G4 OS 10.5.8, which has been working since new, to a 2nd gen extreme n, which is hardwired to the G4 ethernet port. I have been able to get airport utility v5.5.3 to go as far as setting it up to the point of restarting its config, but then it stops & message can't find. Now when I open airport utility after a reset of the extreme the message is it can't find any wireless devices and rescan. I have taken the modem & time capsule & placed them right next to the older extreme, but get nothing.
Frustrating!!
If you have an iPad or iPhone, you may want to use that instead to configure the Extreme.
Similar Messages
-
I Have two Time Capsules (1TB and 2TB) and want to set one for business and the other for family - networking seperate Macs to each.
Both should be plugged into the network with ethernet.. if at all possible.
If you have a router already then both bridged otherwise one set to router and one to bridge.
How do you access the TC? Ethernet or wireless?
Are they located in the same area?
You could set different wireless networks.. if they use wireless.. this is nice easy way to do it.
You can set user account in the TC you want the business one to join with.. that will prevent access by the family.
So there is a number of ways.. none are particularly secure btw.. the TC is a home not a business device.. if anybody wants access they press the reset for one second.. pofff all the passwords are default for 5min.. to allow people who forget their password to get access.
On ML you can encrypt TM backups.. this is better for security if that is the problem.. and still use different user profile to prevent access. -
I recently bought a Time Capsule and sucessfully set it up in accordance with the instruction book. The home network and guest network seem to work fine but my MacBook cannot find the Time Capsule wirelessley.
Initially I set up the time capsule connected to the MacBook with an ethernet cable. The Time Machine got 30GB way through a 60GB initial back up and then stopped for no obvious reason. Since then the capsule has not been visible to the MacBook. I have tried to reconfigure through Airport Utility but even after reperated rescans the capsule remains invisible.
Any help would be extremely welcome.1. i would restore the express to factory defaut by holding the reset button on the unit with a paperclip while you are powering it on
2. if it restored, you should be able to see it in your wifi icon at top of screen as "airport express"
or you can see it in airport utility
3. then if you want to connect it wirelessly to your time capsule, you would choose "extend network" and put in relevant security and password....this would make the express a wireless access point, fed by your time capsule(main router)
if you chose to do it wired which is a better way if you have access to ethernet port at wall, you would choose "create a wireless network" and then under the "network" tab you would choose "Bridge Mode".....this would make the express a wired access point, fed by your time capsule(main router) -
I have just tried to hook up a new time capsule and all goes well until it tries to restart the time capsule after set up - it then just continues to flash orange and is no longer recognised.
Have updated airport software.....
I've had several attemps and would really appreciate some guidance please?Trying to connect the Time Capsule using wireless only will require that you know the following three things:
1) Name of the wireless network
2) The exact type of wireless security the BT hub is using (It may be WPA, WPA2, WEP 128, WEP 64 of any of a number of other things. If you are not sure, you may need to contact the BT folks for this information
3) The wireless network password
If you can get back to me with 2)......I assume that you know the name of the wireless network and password.....I'll provide you with a step by step guide to configure the Time Capsule to "join" the BT wireless network.
An alternate....and much easier.....way to connect would have the Time Capsule connecting to the BT hub using an Ethernet cable connection, which will remain permanent. Let me know if that might work for you. -
Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.
Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers -
What is the best way to configure my time capsule if I just want to use it for storage?
I have a time capsule that I just want to use as backup storage - I don't need it for accessing the internet. What is the best way to set it up? I just tried and it seems to override my normal internet WLAN, which isn't what I want. If I re-insate the existing WLAN, presumably the backup won't happen automatically on the time capsule. Any insights very welcome!!
DaveTo work as a backup location the TC has to be part of the existing network.
The best way to achieve that is to plug the TC into the existing modem router and put it in bridge mode.
Apple lately have tried to force people to use the TC as the main router.. and the setup via airport utility pushes you in that direction but it is wrong.
You bridge it and use it as storage.. that is fine.. Simply turn off the wireless if you prefer to use the existing wireless, although for Macs the TC will often work better and you can pick up internet through it at the same time.
With access by wireless you cannot have two separate networks. If you try to do that, then you will have one connection with internet and no backup.. and another connection for backup with no internet and be forced to swap between the two.. do not do this!!
You can even setup wireless as roaming.. so same name and security and password as your existing modem router.. and allow the computer to determine which is the best signal to join. -
I attempted to set up a new HP wireless printer. It is unstable and HP support says I have too many devices since I have a time capsule and 4 airport express either extending my network or being used for a different printer or stereos. Anyone else find that their Airport Express/Extreme interferes with a wireless printer. If so, what's the point?
I have a similar model, the HP 8500A here in the home office that I originally hooked up using wireless on an AirPort system consisting of an AirPort Extreme, Time Capsule and 2 AirPort Express devices.
The HP was originally hooked up to the "main" router using wireless as a test to see how wireless would perform. No issues with setup or performance over the first few weeks. I did eventually change the device to connect using Ethernet once I had room to move the device near the AirPort Extreme.
HP is pulling your leg with the advice about too many devices. The AirPort Extreme and Time Capsule will handle up to 50 wireless devices. In my case, I did nothing except follow the setup procedure and restart the entire network....something that I always do when I make any change to the network. -
I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!
You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine. -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers. -
How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!
I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two. -
Hi, I had to change my hard drive in my MacBookPro. I was not worried, as I have a time capsul. However, once back with my new hard drive, I have not been able to restore all my info "as if nothing happened".
What can, should, I do?
Thanks for your help.Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
Here's how to:
Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
Message was edited by: Ingo2711 -
I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.
On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.
Maybe you are looking for
-
Leap connecting to BlackBerry Link on Windows 7 Pro SP1 64-bit
Connecting with USB cable, you are prompted, initially to install drivers. This initiates the installation of the Device Manager, BlackBerry Link and BlackBerry Blend. After installing/un-installing/re-installing the software several times, checking
-
Multiple WPC page links are not displaying in DLN?
Hi All, I created a site in WPC. I created 10 web pages under Web Pages folder. I created a navigation node for the first page and published the site navigation. Created a role in portal for the same. Now I can see the role and the first page in port
-
hi, i need to uptate a software build using JMS C API for weblogic 8.1 sp2 to sp4 .there is any new jms c api for this? how can i download it? ix exist, what are the changes?? thanks
-
Multiple facts with some non-conforming dimensions
Hi, in our datamart, I have several fact tables. The JOBS fact table includes dimensions of time, employee, org, and job. Other fact tables include those 4 base conformed dimensions, plus dimensions specific to the fact. For example, BENEFITS include
-
I am creating a slideshow and would like to add a video from stills. Is that possible?