HT4060 Hi when i connect the ipad it is showing the battery outline with red stripes and no charge signaling and the display alternates between the battery outline and apple logo. Kindly help
Hi
When I connect my ipad for charging, it is showing the battery outline with red stripes at the bottom and the display alternates between this picture and the apple logo. This happened when i connected to the main power and also when tried charging through my macbook. Please help.
First step is a SMC reset:
http://support.apple.com/en-us/HT3964
Your font is a bit excessive.
Ciao.
Similar Messages
-
my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi can someone please let me know why my ipad2 syncs but doesn't charge. I'm using windows 7.
The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode. Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
Cheers, Tom -
When I connect my iPAD to my PC it no longer opens it at as device in itunes.
This has worked in the past.
I don't have problems with my old iPOD. That is recognised and syncs ok.
Also, the PC recognises the iPAD as a drive so I'm not sure why it doesn't open it in itunes... Very frustrating.Thanks, this helped. THere was a new version of iTunes I downloaded to my PC and now the iPad is recognized.
The problem now is that I get the message that I cannot backup my iPad as my PC is not authorised, even though when I click to authorize it says my PC is already authorized.
I will click through the forum to see if there is an answert to this. -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!
Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable. -
help me. My Itunes don't have the upgrade and restore button when I connect my Ipad??? My Itunes version: 11.2.2
If you're using a USB hub take it out of the loop. Plug directly in to a USB port on the system. If you are using a front mounted USB port, try one on the back instead. If this doesn't correct it, try shutting off any firewall and antivirus software and turn off User Access Control.
-
Hello when I connect my Ipad to my HD-television with the Apple AV-HDMI converter cable I don't get a FULLSCREEN view on my HD television, who can help me ?
Hi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
I really need HELP!!! I have a laptop that runs with windows vista, and I have been having issues trying to get it to download the new version of itunes that would be compatible to the new version of ios 7 that I have already updated on my ipad. I have downloaded this three times, it shows that the download is complete, but when I connect my ipad to my laptop it is still telling me that I have to download the new version again and it will not sync with my ipad until I do. Does anyone else have this issue and can anyone help me figure out how to correct it? I would be most grateful!!
sign out from the creative cloud and then sign back in
Sign in, Sign out | Creative Cloud desktop app -
When i connect my ipad with my pc i always get the answer that the PC does not identify my pad
when i connect my ipad with my pc i always get the answer that the PC does not identify my pad
Hi there,
You may like to try the steps outlined in the site I have linked to below. The site was not made for your issue, but should help nonetheless.
iPad Assistant iTunes
Regards,
Nathan -
How to update Ipad 4.3.5 to ios 5/6? When I connect my ipad to itunes it only offers ios 7...I DO NOT want ios 7...HELP! I have ios 7 on my iphone and I don't like it. How do I update my ipad to a lower version....5 or 6? I can't access or download many apps. HELP!
jill726 wrote:
How to update Ipad 4.3.5 to ios 5/6? When I connect my ipad to itunes it only offers ios 7...
Because that is the Current iOS for your Device and you can ONLY update to the Latest... current... version. -
When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes." I tried uninstalling and reinstalling itunes. so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work. Plz help. using itunes 11.5 and windows
so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.) -
When I connect my ipad to itunes, my device doesnt show. just the store
When I connect my ipad to itunes, the devices do not show on the side as previously. All I get is the store. I want to sync my items to my ipad and cannot do it. Help!
Judie
I had this issue yesterday with an iPAD mini so if Skydivers suggestion (which I do as well) doesn't work, just shut down the iPad and reconnect to your computer/iTunes.
Best -
i have just downloaded and installed the latest version of itunes. Now when i connect my ipad to my computer via USB, itunes states that the apple mobile device service cannot be started because of an unknown error (1058). The connection worked fine with the previous version of itunes.
so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.) -
I have a few thousand songs in my itunes music library, when i connect my ipad that has only 50 songs on it will it overwrite the songs in my itunes library
I had previously syncd the ipad and the songs on it, then loaded songs from an old ipod into the itunes account (using irip) and now the ipad songs that were in the itunes account are gone. Can I change the auto sync settings before reconnecting the ipad again as to not lose the songs from my old ipod.
Maybe you are looking for
-
Thank you for your time and clear answers. Obviously I would save it and then transfer it to my laptop. One more thing: I am interested in purchasing a tablet primarily for reading PDFs (often scanned books and articles). But I must be able to highl
-
ME49 problem(price comparision) in ECC 6.0
Hi, we have upgraded SAP from 4.6 c to ecc 6.0.we maintained two quotations for one material with two vendors in SAP 4.6 c.After upgardation,i want to compare prices by using same quotations in ECC 6.0.but,it is throwing an error saying that when i e
-
Blob problem (Image storing or Currupted )
AOA! I am working as a developer in a companey. we made a database for HRMS. In this database there is a table EMPLOYEE with a column PICTURE of type BLOB. We were using oracle 8i initially but when we migrate to oracle 9i, we are facing a problem in
-
Photoshop Elements 9.0.3 update
Is Photoshop Elements 9.0.3 update necessary if you don't use a Wacom tablet?
-
645 Combo not starting up properly!
Hey, I'm experiencing a really weird thing here, and it's driving me crazy. It seems to be working perfect when I start up, I can log in to XP and everything - BUT.. when the computer has been turned off for a little bit and I start it up again, the