HT4061 What is the correct name of the tones that my callers hear when they call me, and how do I obtain tones?

What is the correct name of the tones my callers hear when they call me and how do I obtain those tones?

Hi sonyadenice,
Those are called Ringback Tones by AT&T. Other carriers may use a different name for them. If your carrier is AT&T, here is a link with FAQs about their Ringback Tones. If you carrier is not AT&T, then contact them to find out what is available.
Here is the AT&T link:
http://www.att.com/esupport/article.jsp?sid=52352&cv=820#fbid=q17lZzzSKGX
Hope this helps!
Cheers,
GB

Similar Messages

  • How do I get the tabs to have the correct name of the webpage without having to reconfigure each time I open the browser

    Ever since I downloaded the latest Firefox, the tabs for various web pages are often misnamed. For instance, I'll be visiting a page and the tab will be named Google or Wikipedia or the name of a Firefox page! I have to click the tab to see what page I have loaded. When I'm working in a browser with several tabs going, I'd like to see the correct name of the page ON THE TAB.
    I've gone in under tools and tried to assign the appropriate names of the web pages but this is ridiculous! Not only is it a waste of time to have to configure the correct name for each web page I visit, but it will revert back to the incorrect default names mentioned above.
    In older Firefox browsers this was NEVER a problem. Is it because the latest Firefox doesn't like Windows XP? Please give me a good and final fix for this. Like I said, I've tried to reconfigure the names of the tabs, but the names don't stick.

    Thanks for your suggestions. I tried them both and neither fixed the problem. Any other ideas?

  • What is the "correct"  name for the new iPad?  Is it also called the 3rd Generation?

    I have the latest iPad, purchased Mar '12.  But when I read Apple News it is referred to as the "new ipad" & somtimed the 3rd Generation.  What is the "correct name & will "SIRI" be available with this Fall latest update?  Thanks!!!

    Yes, it is somewhat confusing isn't it. Almost like, the iPad is having an identity crisis. I believe the official Apple line would be that it is the "New iPad" but I see it referred to the 3rd generation just as frequently as the new iPad.
    Siri will be available for the "new iPad/3rd Gen when iOS 6 is released this fall.

  • What does the caller hear when they call a "Blocked Number"?

    Just curious to find out what the caller hears when they try to call me when I have blocked their number. TWC was calling non-stop to try to get me to add new services. Thanks.

    Callers you have blocked will hear "Welcome to Verizon Wireless. The number you were trying to reach has calling restrictions which has prevented the completion of your call."
    People attempting to text to your number will get a notification that delivery failed.

  • How do I change the music people hear when they call my phone?

    Wondering how to do what my subject line asks.  Thanks!

    I'm guessing you would like to assign custom ringtones to specific callers?  If so, you can do this by opening the Sound profiles and you're looking for the option to "Set Custom Alerts".  You can also do this in the Contacts section by highlighting a contact, press the BB Menu button and select Edit.  From here, you can scroll to the section on Custom Ring Tones/Alerts, and you can then change the ringtone to whatever you choose.
    I hope that's what you're looking for, but if needed, please add extra clarification regarding your needs. 
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • I have ran the diagnostics test on iTunes and iPod.  The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability.  What can I do?  iPod nano 3rd generation.  All updates are current.

    I have ran the diagnostics test on iTunes and iPod.  The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability.  What can I do?  iPod nano 3rd generation.  All updates are current. 
    It had not been used for awhile and most of the songs that were on there were gone when I turned it on.  I was trying to sync to update the library.

    sklshrnk wrote:
    It had not been used for awhile
    Weeks, months, years?  It's possible your battery is dying.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you. 
    Syncing Music to iPod 

  • What are the icons next to the printer name in the print sheet?

    Ever since I upgraded to OS X Lion, I have noticed something different in the print dialogue.  First the technical info: I am using a 2009 Mac Mini (4 GB RAM, OS 10.7.3) and I have a couple of printers that I use - one is a Brother laser printer (shared from an iMac, running 10.6.8) and a Canon Pixma Pro 9000, connected via USB to a Time Capsule.
    When I hit Command-P to bring up the print sheet, I now get icons on the left hand side of some of the printer names in the printer list.  One looks like a road sign - diamond shaped with a walking person in it, and the other is a circle with a wavy line (tilde?) in it.  The other printer names have no icons next to them.  I gather that the circle-and-tilde means "printer not available" (or something similar) - even though the printer is there!!! And then I wonder why the other printer names have no icons, and I have no clue what the "walking person" sign means.
    I'm adding a couple of images so you all can see what I'm talking about:
    What do these icons mean?  I can find NO reference to them - even in Apple's knowledge base article http://support.apple.com/kb/HT4670 - this just looks like the screen shots from the 10.6 Snow Leopard page.  I looked in the OS X Lion Missing Manual, but it has the same screen shots with no explanation of the icons.
    This is pretty minor, but it's been bugging me for a while.   Any explanation or reference to these icons would be appreciated!
    Richard
    Message was edited by: Richard Williams Jr (had to correct the link!)

    Richard Williams Jr wrote:
    Wow, impressive, thank you!  Is there a listing or other resource available that can tell me what all these symbols mean?  Or are they the only ones?
    This Mac 101: Printing article mentions some of the icons you will see in 10.6. And there is also the Mac 101: Printing article for Lion that shows some symbols. Neither show the icon you are seeing for the Brother but this is icon has been around for a while and used for warnings/information alerts.

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • HT1212 An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode).  The ipad is now disabled,has never been connected to a computer .  Can it be opened without loosing what is on

    An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode).  The ipad is now disabled,has never been connected to a computer .  Can it be opened without loosing what is on it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • ITunes will not display the correct name of my iPod

    Whenever I connect my iPod to iTunes, iTunes displays the name of the iPod as HP_Pavillion, which is not the correct name for my iPod, and if I open it, no songs or videos are displayed but iTunes says that 15.13 gb are used (also incorrect).
    If I eject the iPod, all of my songs are there and the correct name is displayed under settings.
    What do I do????
    John

    okay, with that set of symptoms we had better check on this possibility:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

    I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

    EdWeidman by default the download will be saved to your Download folder.  I do not know the exact name of the file which was provided to you.

  • How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

    How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

    In iPhoto '11: Select the photo in the "Faces" stack, open the "Info" panel, click on the face name in the "faces" brick and then on the name below the face to edit the name.
    Regards
    Léonie

  • What is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    There is no key because that is an important dialog.  Why would you want it to go away?

  • Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, t

    Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, this is very annoying.
    And today it won't even read my camera's sd card, and I try with 2 different ones. If I restart the computer, leaving the memory card in, then it reads it; but if I pull it out and push it back in it doesn't see it. Whath am I doing wrong, if anything?
    Diane

    Where/how are you trying to change the name? If it is in Finder (after you've downloaded the pics to your desktop), highlight the pic icon and press Return. the name field will change and you can type in your new name. Hit Return again. That should make it "stick".  If you're trying to do it elsewhere, please post the steps that you've tried.
    As for your card: do you eject it properly? Either drag icon to trash or hit the eject symbol in the sidebar?

Maybe you are looking for