HT4085 Did all of these options as instructed.  Screen still doesn't rotate and remains stuck in portrait view

Did all of these options as instructed.  Screen still doesn't rotate and remains stuck in portrait view. Help?

Not sure what you've already tried. Have you locked it using the Side Switch then accidentally changed the side switch to permit Muting/Unmuting?
Settings > General > Use Side Switch to: Lock Rotation (make sure check box is here).
Then try sliding the side switch. Also try turning off the device by holding the power and home buttons, then sliding the red slider to the right (then repower).

Similar Messages

  • HT4085 Did all these things mentioned in this article, even did a system reset including data and other settings. iOS is up to date, still the iPad 2 display is not rotating.

    Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
    This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.

    Just check again.
    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected.

  • Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resol

    Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

    Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

  • HT3702 My credit card was charged for two purchases in the amount of 14.95 each. I did not authorize these purchases. The purchase dates were 12/24 and 12/25.

    My credit card was charged for two purchases in the amount of 14.95 each. I did not authorize these purchases. The purchase dates were 12/24 and 12/25.

    Contact Apple at:
    https://expresslane.apple.com/
    Have you downloaded any apps on an iPad/iPhone for kids? If so you may have in-app purchases enabled for free games or similar, and they've racked up charges for you.

  • My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do?

    My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do? It is quite alot of lost songs/ money.....
    Thanks anyone who can help, Apple make it impossible to talk to anyone or contact and I can't navigate Express Lane
    x

    I realise there have been a number of threads like this now that I have started looking, the problem is the back-ups i made were saved to a server network which has now also gone down, a case of dreadful luck really. Is there any other way to get the music back?
    Regards

  • My iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

    my iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

    You can try and put it in a bag of uncooked rice for 5 days or so, but don't get your hopes up. If that doesn't work, you get an out of warranty replacement or buy a new phone.

  • HT3743 I bought a used iPhone 3 from eBay my husband tried to update it and all that comes up on the screen now is the imei and iccid numbers with iTunes icon and a USB have I bought a dud or what

    I bought an iPhone 3 from eBay and when my husband tried to update it all that comes up on the screen is the imei and iccid numbers along with the iTunes icon and a USB. I can only use it for emergency calls as that is all that happens when I slide it on. Have I paid $250 for a dud phone or what can I do to fix it. Any help would be appreciated .

    Sounds like your iPhone was hacked to unofficially unlock it. You can put it in Recovery mode, connect it to iTunes and Restore it in iTunes. Then you will need to call AppleCare, give them the model and serial numbers and find out which cell provider it is locked to. After you get that information contact that cell provider and see if you can get it officially unlocked.

  • Help I tried opening my Mac book pro after shutting it down and all I get is a grey screen with the apple sign and a moving mouse but I can't open it !! What should I do ??

    Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??

    Hey HJA96,
    Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Some of the steps included:
    - Disconnect, test peripheral devices and network cables
    - Perform a Safe Boot
    - Reset the NVRAM / PRAM
    - Start from your Mac OS X Install disc; use Disk Utility
    - Check your cables and power source
    - Remove third-party RAM and internal hardware
    - Perform an Archive and Install installation of Mac OS X
    - Perform an Erase and Install installation of Mac OS X as a last resort
    (See article for full information on all of the above)
    Thanks,
    Matt M.

  • Hi . I want to download apps like Instagram , snapcI think for all of these apps you have to be at least 12 and I am . However when I go to the App Store the install button is grey so I can't download them. Plz tell me how to solve this

    Hi I want to download Instagram and snapchat on my  IPod touch . I think for these apps you need to be at least 12 to download them. I am . However when I go to the App Store to download them . It won't let me . The install button is grey so therefore when I click it nothing happens. Please can somebody tell me how to sought this problem out allowing me to download the apps. As this is getting really annoying now .

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • HT1212 I just followed all of these steps, but my iPod still says that I need to enter a passcode

    So, my iPod said, "iPod is disabled, connect to iTunes"
    I followed all the steps that were listed in the "help center" but it still says the same thing in the lock screen.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If still problem what exactly happens?

  • I am getting total lockups and i am unable to use the app, tried all the usual options but not working still.

    All my attempts at getting FCPX 10.1.1 working are failing.  I was in mid-edit on a relatively simple job.  I am completely locked up with the waiting rotator on continuously. Has anyone had this problem or can offer any advice.  I am on a fully spec'd iMac and use a Thunderbolt 8TB drive.  My iMac is working correctly with every other app.

    There are almost infinite permutations to the type  of media and your use of the Mac and FCP X that it is impossible for anyone to guess what you are doing wrong.
    Please give detailed info of the media, the project specs and your workflow.

  • ALL I CAN GET ON MY SCREEN IS THE ITUNES LOGO AND A PICTURE OF THE CABLE AND AN ARROW POINTING FROM THE CABLE TO THE LOGO

    Hello all, I got my  ipod two weeks ago and it was ok.However, whilst charging it yesterday, I was buying something from Amazon and all of a sudden a message came up on the computer screen that i tunes had been encountered a problem.Since then all I get on the ipod is a picture of the i tunes logo, and a picture of the cable, with an arrow pointing to the i tunes logo, as if ive got to plug it in.Also since this happened, ive downloaded songs, but am unable to load these on to my ipod as the line on my page which allowed me to do this has disappeared.HELP!!!!

    The unit is in factory reset condition.  Connect to a computer that is running ITunes.

  • Some websites say that the connection reset, but after following the instructions to fix it, it still doesn't work, and recently they simply refuse to load.

    Recently, Mozilla has refused to load certain webpages for me, saying that 'the connection was reset' or sometimes not loading at all. I don't know what's wrong and if it's just me. So far, I've had problems getting onto Random.org, Serenes Forest.net (which actually didn't load a few times), and Dictionary.com. Is there something wrong with my internet, and if there is, what? And why does this happen? (I don't have wireless internet, if that helps deduce the problem.)
    I know that maybe this sounds like something that doesn't have to do with Firefox, but Firefox never did this before, and my computer has always worked fine before, so I think maybe something happened to my Firefox that's corrupted it in some way. Has a problem like this come up before, and if so, was it already solved?

    If you are using wi-fi:
    1- Are you connected?
    2- Check if you have full access or only limited access, limited means no internet connection provided. (if so, proceed step 3)
    3- Ping your wi-fi modem IP address:
    ping 192.168.2.1 (my modem local IP Address)
    If you get high number in round trip time (in miliseconds), turn off your modem for about 1 minute.
    3- ping any site that did not load
    Wish it may help

  • MacBookAir 2013 cannot use the cam on yahoo messenger. I see the option but the screen of cam stays black and cam also has no green light

    I did the latest software update and have the cam options to invite or view.
    but screens stays black - I can see the other parties but they cannot see me
    ? what could be the solution .
    thanks

    I did the latest software update and have the cam options to invite or view.
    but screens stays black - I can see the other parties but they cannot see me
    ? what could be the solution .
    thanks

  • My Master Password quit working. I unchecked it and rechecked it but it still doesn't work and I lost all my passwords by trying this?

    The question says it all

    Type in chrome://pippki/content/resetpassword.xul into your URL window (address bar) and then continue by following the prompts to reset the password. You have lost the passwords that were programmed in there, yes, sadly.

Maybe you are looking for

  • Microsoft-Windows-Folder Redirection Error 502. CSC database locked by another user

    Dear all, We are finalizing our Windows 7 migration where we migrated 500+ clients. In our enterprise concept we implemented RUP (Roaming User Profiles) and Redirected Folders for all users. The Redirected Folders have been by enabled by a single GPO

  • Reg:Print program For FB03

    Hi All,    In the Fb03 Transaction When i give print Preview I want to show the Document Date as Blank, by default print preview its coming, hoe can i restrict this, i have done the following steps i don't know how to proceed after this, the steps ar

  • Convert Video TS to .mov

    I have made a number of videos and burnt them to disc. The original iMovieProjects are on my external 300GB HD that has gone belly. I want to convert these movies from disc to .mov videos so that I can use these videos in my family tree but I cannot

  • Looking for examples/help on using Ethernet with Keithley 2701 DMM

    All of the example code utilizing their IVI driver is based on GPIB or RS232. I specifically bought the 2701 to utilize the Ethernet port, but cannot find CVI examples on how to do this. Can anyone point me to an ethernet example using their driver a

  • NCo 3 RfcServer: TransactionID in called function always NULL

    Hello, using NCo 3 (v3.0.1, x64) I wrote a RfcServer which receives IDocs via the function "IDOC_INBOUND_ASYNCHRONOUS". When the function is called by SAP the  TransactionIDHandler seems to work fine as these functions are called together with a Tran