HT4085 My rotation has stopped, and yes it is unlocked, please help.
My rotation has stopped, it is all unlocked, but it will not work, also in motion games.
If there isn't a lock symbol at the top of the screen next to the battery indicator then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
Problem capturing DV; random stops and "no video" error. Please help!
I'm trying to import about 15 minutes of DV recorded in late 2005. During capture (using Capture Now...) the capture fails during each attempt at different times (13 minutes, 11 minutes, 30 seconds, 6 minutes). The error message is, "This operation could not be completed as there is no video."
If I watch the capture, right before this error message, the camcorder stops playing and starts stepping back frame by frame. The capture window says something like, "Searching for timecode." Then after a minute or so, it starts stepping forward frame by frame. Then, after this happens for a minute, the message in the capture window changes to, "Cueing source material." The camcorder starts to play again. I think what SHOULD happen is the capture resumes. But the capture video preview window remains black, and after a few seconds I get the error message.
When I watch the tape (without capturing) I can't discern any drop outs on the tape, although I guess they could be there after 4 years. But if that is the case, why does this problem occur at a different point each time?
I tried turning off the preference to "abort capture on dropped frames" but that had no effect.
I'm using a Canon GL2, DV-NTSC Firewire Basic, and the system noted below.
FCE version 4.0.1.
Any help would be most welcome.
Message was edited by: Anthony M Kassir MDLet me summarize the problem so far.
1. When capturing DV, FCE behaves as if there is a time code break (when there isn't one) at random points on the tape. This may occur anywhere on the tape, even at the very beginning.
2. When this occurs, FCE will roll the tape back and then forth, looking for the break, as expected. (It doesn't roll back if the tape is at the beginning, obviously.)
3. After a minute, FCE is getting ready to start the capture again, and says "cueing source material."
4. The camcorder starts playing the tape again, but the capture video preview window in FCE remains black, as if there is no video signal.
5. After a few seconds, while the video on the camera is still playing, FCE gives the error, "This operation could not be completed as there is no video."
Observation: The problem occurred much more frequently when capturing DV from a Canon GL2 directly to a LaCie disk on the same Firewire bus, even though the camera is attached via Firewire 400 and the drive via Firewire 800. Capturing to an internal (non-boot) media hard drive does not solve the above problem, but the problem occurs less frequently.
Does the above description suggest any particular explanation of what is going on? I wonder if FCE is corrupted? Should I try reinstalling FCE?
Thanks. -
Music app has disappeared and i have tried everything please help
My music app is completely gone and i have no idea where it has gone. i have tried restarting,resetting,and other tricks but non have worked if u have an answer for me, i would really appreciate it.
Have you done a spotlight search? Swipe down from the middle of the screen with two fingers, and type Music in the spotlight search. You should see the Music icon display in the list. See if it is in a folder (if it is the folder name will be listed next to the icon). If it is not in a folder, but displays, see if you can find it on any of your Home screens.
If you still cannot find it go to Settings>General>Reset>Reset Home Screen Layout. This will reset your Home screens and the original Apple core apps will show up on the first Home Screen (including Music).
Cheers,
GB -
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
-
I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
Personas Rotator has stopped working, again
Since downloading the latest Firefox, V? (not sure) Personas rotator has stopped working and the 'enable' button has disappeared. I had just got it working perfectly that only lasted a few weeks, then it just stopped.
SlimSylv
Oh, BTW, I'm running Windows XP Pro, V.5.1.2600 SP_3.0By stopped working do you mean frozen
Sometimes people have found that performance increased by changing the Search behaviour
Click on the arrow in the Search box and untick Search Entire Library -
Adobe flash player update service 11.6r.602 has stopped and was closed
adobe flash player update service 11.6r.602 has stopped and was closed.
i see this pop up at the bottom of the screen (task bar) and it is becoming very annoying.
Why can't this be stopped.
I have unchecked the service in msconfig.
I have the current version of Flash Player.
I use Google Chrome and Mozilla Fire Fox.
I do not use Internet Explorer---way to slow and junked up.
I do use Maxthon Cloud occasionally.I suggest that you do a clean install of the latest Flash Player, as described in http://forums.adobe.com/thread/928315
-
Unfortunately messaging has stopped and not receiving text messages
I, am also having issues with "unfortunately messaging has stopped", AND, NOT receiving text messages. I also have 2 other Droid Ultra's on my account doing the same thing. This is totally unacceptable!!! I am not paying $600 for a piece of crap phone that does not work. I had my phone recently replaced because Verizon thought that was the problem. I can't even get the message screen to stay up long enough to type a message, if it opens at all!
Also I am getting tired of NOT receiving messages sent to me! When I do get them, the icon tells me I have a message with a number usually no more than a designation of 2 but reverts back to a 1, and, when I open the message, read it, and close out of it, if it does not close out on its own because of stopped messaging, the number on the message icon does not clear out. I have to turn off the phone and restart it to clear it. This is not acceptable and I would expect better from Verizon, not the run around!! If I had to send an urgent message and get a reply, do to the fact I am disabled, and this is my only way to communicate, that this is extremely unacceptable!!!!
I expect this to be resolved yesterday, not when you all get around to it, OR, issue me a Samsung!!! I am sure all of the others would agree!!!
I look to hear from you ASAP!!Hello,
I am using the messaging app that was preloaded with the phone, the green face icon. I do not have an "Android Keyboard" app, but I have cleared the cache on the "Messaging" app, several times. I have also gone to the Verizon store where an associate did a soft reboot, telling me that would work. A very short time later, the error message started appearing again--so this did not work either.
The error message comes very sporadically. Sometimes several in a few minutes, other times not for hours. -
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.
-
i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help
it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?
-
When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!
- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod. -
Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!
Try doing it on your computer with iTunes and then sync to your iPad to see if it clears the problem.
-
My IPOD menus suddenly appear in Japanese or Chinese and are impossible to understand for me who is european. Has somebody else had this problem? Please help? The song titles are still in the language they were entered though. /Jane
Fingers crossed, the following document might be of some assistance:
iPod: Changing the display language
Maybe you are looking for
-
Having trouble setting up Mail with a POP account
I am trying to set up Mail with my Universities webmail service, and according to their tech page I need to set it to POP. I also made sure that I have the incoming and outgoing mail servers correct, and i've made certain that I am entering my userna
-
Networked Macs can no longer see iTunes 7.6 shares
Since installing iTunes 7.6 (29) I cannot access my library from any of the Macs in the house. I keep getting a firewall blocking error message. The only way I can gain access is to switch off the Leopard OS 10.5.1 firewall altogether! Nasty. I delet
-
Dropdowns in Adobe Acrobat XI Pro
Is there coding that I can use to have a dropdown expand so the items are shown when the user tabs to the dropdown?
-
Why does iTunes play consecutive songs by the same artist so often?
Is there a way to stop or greatly reduce the issue in iTunes of playing consecutive songs by the same artist when playing in "shuffle" mode? There was a slide tool in preferences that allowed you to set that to "less likely" or "more likely" but tha
-
Hi On Mac Os 10.6.8, is it possible to manually mount a external USB hard drive ... Someting I do must be wrong ... for over one year I had a lassi 500 g, it stopped to appear on my desktop, I gave it to a friend and it still works on his PC. Then I