HT4101 When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome tis
When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?
You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.
Similar Messages
-
olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem . very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?
I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad -
I am unable to download photos from three different cameras, Sony, Samsung and Nikon using the lightning USB camera connector. I get a error message saying the the USB device uses too much power.
You may be able to over-come the problem by using a powered hub.
https://touch.ebay.com/tablet/item?itemId=130511148857&rd=vi -
HT4101 My ipad says the device uses too much power when I connect my camera
I brought my ipad 2 on holidays and have purchased the camera connection kit. I tried to download my photos and an error message came up saying that the device uses too much power! My ipad is powered up to 100% and I have closed any open files and it still says the same thing? Does this actually work or do I have to return it?
What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?
-
my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!
try resetting the ipad,or change the cable ,it woould work
-
Device uses too much power error when trying to upload pictures
I am now getting the device uses too much power error when trying to upload pictures from my Nikon Coolpix. It had worked fine using the Apple camera kit, but just started giving this error. What changed?
1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad -
When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?
1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad -
I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb
You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
Cheers, Tom -
Camera connection kit w/USB says cannot work uses too much power
When using the camera connection kit /USB the message cannot use device it uses too much power pops up!
What are trying to use it with ? If you are connecting it to your camera then does your camera have a setting on it to enable PTP (Picture Transfer Protocol, Pictbridge) or Mass Storage Device ? If you are trying to use a third-party card reader or a flash-drive with the kit to copy photos/videos over to the iPad, then a lot of them require more power than is supplied to the iPad's port - if you have a powered card reader or a single-card reader (i.e. not one that has different slots for different types of memory card) then that might have a better chance of working
-
help
Is the USB drive you are trying to connect a USB thumb drive or a USB hard drive?
I have 4 USB thumb drives - an old one at 250MB, newer ones at 1GB and 4GB, and a new one at 8GB. All work in the camera connection kit except the 250MB (requires too much power). Suggest you get a new USB drive.
Use your camera's SD card.
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom -
I have bought the lightning to USB camera adapter for my new iPad but it is saying the accessory uses too much power? What do I do? Please help
Is the adapter an Apple product or 3rd party?
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Cheers, Tom -
I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.
Or use the camera's SD card instead.
Cheers, Tom -
I bought a camera connection kit but fail to connect to my iPad . My iPad prompt me that my attached device using too much power ! I got no problem using the SD connecting kit. My camera is Samsung EX1 , pls advise
Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?
-
When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions
It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information. -
Ipad2 Camera Connection Kit
When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
What should I do please?
DavidI believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
Cheers, Tom
Maybe you are looking for
-
Error Code: -8155 I get this message even when logging on to THIS Apple Site. I even get it at times when accessing my bank or other institution where ID is required. How do I examine Certificates and determine acceptability of same - as opposed to o
-
I can no longer see iCloud in finder
Until I updated to OSX10.9 last week i could see all my word and excel files in the icloud icon in finder but it has now disappeared. I could also see my files from excel and word. I hope apple have not lasy years of my work! how do i get my files ba
-
BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC
Based on queue name how to identify the sender system the issue is Messages are are coming from pi to ecc , check below queues. These are incoming queues to Ecc from PI. We are trying to find what these queues are. Sometimes these are failing and we
-
Why Do Preview Sidebars Now Only Open In Table of Contents View?
All of a sudden Preview's PDF Sidebars, which always used to open in "Thumbnails" view (which I prefer), only open in "Table of Contents View" (which I hate) when I open any PDF. How can I get Preview to always use the "Thumbnails" view like before w
-
I can't upload a copy I got of Adobe Photoshop CS on my Mac Mini OS X 10.5.8. All I can get for why is this "This program cannot be run in DOS mode" I have no idea what this means?