When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?
When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?
1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad
Similar Messages
-
Ipad2 Camera Connection Kit
When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
What should I do please?
DavidI believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
Cheers, Tom -
HT4101 What does it mean when it says that the USB device requires too much power?
What does it mean when it says that the USB device requires too much power, when using the ipad lightening pin camera connection kit?
Just that. The iPad allocates a certain amount of power to that port. If the device you're trying to plug in wants more than the iPad is willing to give, it'll trigger that warning.
If it's something that you just must hook up you can try using a powered USB hub, but results are mixed at best.
What are you trying to hook to your iPad? -
When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions
It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information. -
Useing the camera connection with the USB cable the ipad says "Accessory unavailable the attached accessory uses too much power, the camera is an Olympus fe.
It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information. -
my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!
try resetting the ipad,or change the cable ,it woould work
-
When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?
You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.
-
Device uses too much power error when trying to upload pictures
I am now getting the device uses too much power error when trying to upload pictures from my Nikon Coolpix. It had worked fine using the Apple camera kit, but just started giving this error. What changed?
1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad -
When mirroring how do I close my display on my iPad/iPhone while using tv apps and not closing airplay
I don't know if it would even be possible to allow the iPad to mirror while it is asleep, but if you want to make Apple aware of anything with regard to the iPad, give it a try here.
http://www.apple.com/feedback/ipad.html -
HT4101 My ipad says the device uses too much power when I connect my camera
I brought my ipad 2 on holidays and have purchased the camera connection kit. I tried to download my photos and an error message came up saying that the device uses too much power! My ipad is powered up to 100% and I have closed any open files and it still says the same thing? Does this actually work or do I have to return it?
What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?
-
When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?
katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character? -
USB Devices Disabled due to "using too much power", but no devices plugged in
I keep getting the following notification
USB Devices Disabled
Unplug the device using too much
power to re-enable USB devices.
The thing this the only thing plugged into my Macbook Pro is the charger.
Any ideas on how to fix this?Unusual.
I would start with SMC and PRAM reset:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/PH14222?viewlocale=en_US
Ciao. -
olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem . very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?
I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad -
My Macbook pro is rejecting my Iphone 5 charger. When ever I plug it in it says that the usb is taking to much power, yet when i plug in a different Iphone 5 charger it works fine. I'm just wondering why this is happening and how to fix it?
My Macbook pro is rejecting my Iphone 5 charger
Do you actually mean the white cable with a lightning plug on one end and a USB on other
If so that is not the charger ,that is the cable
The charger is the device that plugs into the mains socket
If so
cable may be faulty if less than 12 months old take it to Apple Store genius bar for checking -
I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.
Maybe you are looking for
-
External display won't work over DVI
I've got an ViewSonic vx2025wm hooked up to my MacBook Pro. It used to work fine over DVI, but some time ago the monitor stopped being able to detect the signal and I had to switch over to VGA (via my Apple DVI-to-VGA adapter). That works fine at the
-
Getting error while loading flat file into table.
I am using ODI 11 and i am trying to load data in oracle database table using source as flat .txt file . When i execute the interface , i am getting below errors. ODI-1217: Session INF_FILE2TAB (31022) fails with return code 7000. ODI-1226: Step INF_
-
Passing several fields to various classes and methods?
Passing several fields to various classes and methods? Hi there. I have an application that allows a user to define a configuration and save it. The user can edit an existing configuration, add a new one, or delete an existing one. Once a configurati
-
Upload file in web form - ora-105101
I want to upload files in a web form. I downloaded fileupload utility, but I can't make it work. I can launch the form, open the dialog box, choose a file, then the progress bar appear and a ora-105101 is raised in the custom_item_event trigger. When
-
Looking for Script for iTunes, to extract audio segment from Vide podcast and save it for iPod Nano. can' find it in dougscripts.com/iTunes. Used to have that script but lost due to update my OS 10 to 10.9.4 Thank you! Igor.