HT4241 i am trying to connect a hdmi cable to my mac book air i hit source list but not is showing on my tv can somone help me to fix it
i connect a mini display port to my HDMI cable but all i am seeing to the TV is the screen saver on the main screen i am unable to view videos on my tv can any one help
It's possible the TV doesn;t support the same rersolution as before.
Does the LED flicker when you press remote keys?
If so try holding menu and up arrow together for 6 seconds to cycle display resolutions.
If possible try a different HDMI cable/HDMI port.
If all fails you may need to do a restore as described here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
Similar Messages
-
HT1338 How to setup an external HDMI screen with a Mac Book Air
How do I setup an external HDMI screen with a Mac Book Air? I am using an Apple accessory Moshi cable interface with a Samsung Syncmaster screen SB24B300 and I am unable to get any response. Thank you.
You need to connect it to the computer using either USB or Thunderbolt. Setup is simply prepping the SSD:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed. -
How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards. -
I m trying to update iTunes 10.5.2 my mac book air but it keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes and it needs at least 10.5 version can anyone help?
no that does seem to work it is as if it is not recognising it. it says installed on screen but when plug new ipad and iphone4s in it says new version required but i have ran a system update and it says everything is updated
-
i tried to resore my iphone 3GS with itunes but it is showing an error 29 , can anyone help me to sort out this problem
Try to restore get a error 29 - iPhone 3GS - iFixit
See if this helps. -
Can I use 2 displays when I connect a 1920x1080 display through Thunderbolt to the 27 cinema display when it´s connected to the all new 13" Mac Book Air with thunderbolt?
Thank you, I have read that I could daisy chain the HD RAID enclosure on one of the thunderbolt ports with another monitor, if the monitor were at the end of the chain, but I do not know if the other port would still simultaneously support yet another external display at the same time.
-
I am trying to use my iPhoto pictures as my screen saver on my mac book air. Many of the pictures' heads are cut off. How do I get the pictures to fit the screen properly without the pictures be distorted?
Open the screen saver control panel. Right above the preview window there's a popup menu. You'll probably want to set it to "Fit to screen" so the pictures will be resized to show on the display.
-
Hi!, my Mac Book Air has been totally hacked, and I cannot re/install my OSX because they have also hacked my Internet, so I cannot connect my Mac to the Internet. Any suggestions to fix my poor Mac Book Air????????????
HELP..........It's best to describe the problem in as much relevant detail as possible, rather than what you think is causing it or how you think it should be solved.
-
Using mac book air (late 2010) minidisplay port and minidisplay port of monitor Monitor Dell UltraSharp de 23.8" Widescreen U2414H.
Can I connect them using a thunderbolt cable or is there a specific cable I can use to stablish this connection?
ThanksA Thunderbolt cable won't work. Use a Mini DisplayPort to Mini DisplayPort, or Mini DisplayPort to DisplayPort, cable.
<http://www.monoprice.com/Category?c_id=102&cp_id=10246>
(If you use DisplayPort, make sure you use the Input, not Output, port on the display.) -
I have just bought a new printer a Canon MG5350 and my Mac will not connect to it. It wont find it through wireless and when i connect a printer cord, it recognises the printer but cant find any drivers to support it.
Has anyone got any suggestions?Maybe, check their specs and read their reviews BEFORE purchasing.
No iOS device has been able to run Flash since the first iPhone was releasd. Here's why... http://www.apple.com/hotnews/thoughts-on-flash/ -
I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?
As the other replier said, contact Sony. It may not be compatible with the iPod.
-
My two year son was playing with the ipad and must have input the wrong passcode too many times. As a result, the ipad was disabled with further message to connect to itunes. I cannot remember if the ipad was synced with my laptop from the outset. Can you please assist with which way to go about in order to enable the ipad as it is not even allowing me to input the passcode hence l cannot access the ipad so far.
http://support.apple.com/kb/ht1212
-
Cant connect my ios devices to my mac book air
I cant connect my IOS devices (iphone 4s + ipad 2) to my macbook air mid/2013 by usb or bluetooth.
when connecting by usb the devices dose not charge or sync with itunes. it charges for split a second and disconnect anther time and it go forever in the his loop.
I tried using two cables.
The devices are working on my windows pc.
my macbook works with usb sticks and other android phones.
note:
-both devices are on ios 8.1
-my macbook is on Yosemite
-my ipad 2 worked well before updating my mac to yosemiteiPods that have the Window format should continue to work on a Mac, because Macs can read/write the Windows format used on iPods. (The opposite is not true - Windows cannot read the Mac format.)
You can change the formatting, by doing a Restore on the iPod, but that is done in iTunes, so iTunes needs to see the iPod when you connect it. The Restore will also erase the iPod.
Since it continues to work on your friends Windows PC, your iPod itself is probably OK, so you may want to first look at the connection to the Mac.
Did you use the same USB docking cable when you connected it to your friend's PC? If so, you can rule out the USB cable as the cause. If not, it's possible that your USB cable is faulty.
If you are connecting the iPod to a USB hub, try a direct connection to the Mac's USB port. If other USB devices are connected at the same time, try disconnecting the other devices (except for standard keyboard and mouse if normally used). You may also want to shut down (power off) the Mac, if you have not done so in a while. Also, do this to Reset the iPod
http://support.apple.com/kb/ht1320
Start up the Mac, run iTunes, and connect the iPod by itself to a direct USB port. -
can anyone help walk me through placing a new ram into a mac book air 2010 model
The RAM in a MacBook Air cannot be upgraded after purchase.
https://discussions.apple.com/message/12782306#12782306 -
How do I go about either stopping a delteing user account that is in action, or How do I reboot my computer? I am stuck not sure what to do! I am in the process of deleting two user accounts but I am stuck and can't turn my computer off reboot, or reverse it. Anyone have any ideas for me?
Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.
Maybe you are looking for
-
Updated apps not showing up or syncing to iPhone
In the last week or so, I've noticed iTunes on my Mac says I have several updates for various App Store apps I have installed, but when I run the App Store on my iPhone, it doesn't show the new apps. I tried updating the apps on my computer then sync
-
Solution Manager as CEN and PI 7.1
Hi, We have a PI 7.1 sytem that has a Message-Based Monitoring that is configured LOCALLY via Runtime Workbench -> Alert configuration (explained here : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e05ad5a6-4b4f-2b10-df94-9b9e0
-
I'm trying to write a program that will take employee entries using JOptionPane and then display the list. It's still in its early stages, but I'm already having issues. After I finish adding my entries, it only prints the line "The list contains:" I
-
Hi all, has anyone come across text pool table. The structure is TEXTPOOL. I would like to know, how to fill values in it! Regards Bharat
-
hello,all new to forum,just bought my first imac and love it.my ? is this how can i open several different web pages so i can use spaces.thanks len.