HT4262 I have optimum cable and internet included. Do i need to have my optimum internet inorder for my Airport Express to function?
I have optimum cable and internet included. Do i need to have my optimum internet inorder for my Airport Express to function?
The AirPort Express requires a modem with an Internet connection if you want it to be able to access the Internet.
So, if Optimum is providing Internet service, but you do not have a modem.....you will need to ask Optimum to provide you with one.
Similar Messages
-
I have an apple time capsule and am about to have xfinity cable and internet hooked up in my new apartment. The cable provider said I need a modem that is Docsis3 capable - will my time capsule do the job or do i need another modem? Thanks
will my time capsule do the job or do i need another modem?
The Time Capsule is only a router...with a built in hard drive. It does not have a modem built in, so you will need to use a separate modem with your new calbe service.
If the cable provider offers a modem with their service it would be good idea to use that device, as you know that it will be supported by your provider in the event of any Internet connection difficulties.
If the provider does not offer a modem, I am sure that they have a list of compatible modems on their website, or check with customer support for more information. -
I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy
According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped. -
I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?
That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user. Among the surprises:
- it strips out images from headers and footers without warning
- it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
- it strips out alternating left/right margins, without warning.
There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
-mail merge
-meaningful Applescript/Services support
-non-contiguous text selection
-ability to set defaul zoom
-ability to see comments while editing
-ability to print comments
-ability to read RTF files
-ability to drag in hyperlinked ted from a browser
These about about 90 other features are gone.
Then there are the bugs. Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers. Many reports of the program crashing, courrupting files, etc.
Fortunately for you, the previous version of Pages is still on your system. Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!). Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set. -
My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?
Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process -
TS3972 Im using an ethernet cable and apple tv picks up my pc but not my internet.
Im using an ethernet cable and apple tv picks up my pc but not my internet?
the message that comes up on apple tv tells me
it detects my netork but not my internet.and directs
me to go to the configure the network again,i do that
using the auto function on the ethernet config.
it shows my an IP address
subnet mask
router and dns are blank
and shows an ethernet address.
thanks for your patience im new to this. -
My ipad 2 is 18 months old and has stopped charging. Have reolaced cable and adaptor without any help. Looks internal dock connector has got damaged. What is the solution.
It'll be an out of warranty replacement since accidental damage isnt' covered by the factory warranty.
http://www.apple.com/support/ipad/
contact support and make an appointment at your local apple store. The out of warranty replacement fee for an iPad 2 starts at 249 and goes up. So another option for you may be if your money is better invested in a new device that will have a longer life. -
I have a cable modem for my Time Capsule. Do I need a separate cable modem for my airport express?
I have a cable modem for my Time Capsule. Do I need a separate cable modem for my Airport Express? (I'm using it to "extend" my network and also for Air Play.)
No, you connect to your Time Capsule wirelessly to "Extend" the network..
See this Apple doc:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US -
I would like to display Netflix on demand on my LG TV. What cables and/or adaptors will I need to connect mp ipad to the TV?
Thanks for helping. The TV has the following open slots:
Video in
R L video
audio image
PC Sound
DVI input
RGB input
Upgrade port
Remote control
I also have a Time Warner cable box (Scientific Atlanta Explorer 4240HDC).
Do I need to go through that? -
I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?
How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?
Depends on the Mac; what model and processor is it?
> 'about this Mac' > 'more info'
In the first section (hardware overview) post this info;
Nothing below that is reqd, especially not the serial number. -
I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,
Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl -
I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!
The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network". -
There is Red Icon at the top bar and it says I have a virus and things keep popping up saying I have a virus and need to do a scan and pay for some sort of software to complete the scan, someone told me that this is a virus in. How do I get rid of it?
This could well be the notorious Mac Defender - which is an annoying program that tricks you into thinking that your Mac is infected with a virus, when the only infection is Mac Defender itself.
When surfing the web never EVER click on a link that says "Free anti-virus scan" or "Scan now" - they are nearly always scams which will end up infecting your computer. Although Macs are resistant to viruses, they're not resistant to user stupidity.
If you Google "Mac defender" then you'll find plenty of sites with instructions on how to remove this minor nuisance. Take this as a warning that you need to be more careful in your surfing habits.
Bob -
When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Creating XML File Using xmldom Package
How can I create an XML file from scratch using the PL/SQL xmldom package? I want to create an XML file using the xmldom package instead of building the individual tags as strings of VARCHAR2 character data. There is quite a bit of documentation rega
-
Serious overall loss of performance since cc 2014
Hi guys While the last version of CC was working flawlessly on my mac, since the 2014 update its not the case anymore. I really lost in performance with the "last" version and CC 2014 is at best really laggy and unstable when i use it. I've ran multi
-
My mac seems to be frozen on an internet page. I can't force quit. I can't control+options+command+esc. I can't access my activity monitor. I CAN see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?
-
Why do i get an error 63 when i sent a mail use SMTP Email
I used "SMTP Email Send Message.vi" but i have allways the error 63. How can I reslove this error? Ist this a port error? a pop up displayes and shows that i should to change the option under the tool palette-> Server.Vi but Ido not know what i can
-
When I click on my email (all email accts) the body of the email is blank. There isn't even the words "download remaining" at the bottom. Sometimes there is the word "loading" in the middle and then nothing. I have an iTouch and an iPad.... they b