HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

I have a new HP LaserJet M1217nfw MFP that is supposed to have air print. My iPad isn't reading it. Is there something special I need to do? Both are on the same network and my laptop is working fine with it. Any suggestions?

1. Make sure it's setup for network printing
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
2. You can try using this App
http://i1224.photobucket.com/albums/ee374/Diavonex/6df9f88d.jpg
3. Reboot router, printer and iPad if necessary

Similar Messages

HT3500 I cannot connect Macbook (OS 10.6.8) to Epson XP 400 wirelessly. It works when connected to a USB cable. Both printer and Mac are on the same network and Norton/symantic is OFF. The Epson will not show up in "add printer". is off.

I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.

Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.

My ipad with retina display can't find my epson artisan 730 wireless printer. They are on the same network and printer's wireless connection is excellent. What are the steps to fix this?

My imac won't pick up the printer either. Even after I updated it's software. My ipad is new. Any help would be appreciated. Thanks!

No change. The printer still doesn't show up on my devices even though they are all on the same network. On the printer's connection print out the connection reads Pass and that the network is working correctly. However, then it states "*A router/access point channel conflict has been detected. If you have problems printing or scanning, Improve your wireless network environment." "*If the problems persist, see your documentation for help and networking tips."
I've gone through all the documentation and still can't figure out what the problem is. I've had the router checked out by my building and they claim everything is in order. I have a excellent signal.

HT204291 I have updated the new iOS today and the mirring feature still does not appear on my iPad, iPhone 5 or Apple TV and all are on the same network ... Now what?

Ok it's been two weeks and I have not been able to mirror since I updated to IOS 7. I have called the support people with no avail. I was hoping that the new IOS7.2 software would fix the problem but once again I was mistaken... Do any of you know a way that I can go back to the IOS6 system so that my stuff will work?

Thanks, but a I indicated in my original post, I have already tried everything in that KB article. That article doesn't address the fact that I can mirror from an iPad 4, but not from an iPad 2. According to all of the documentation about mirroring, there is no reason why the airplay / mirroring icon shouldn't appear. It's explicitly enabled on iPad 2.

I keep getting an error code that my billing info doesnt match my card info. I verified with my bank, the bank card, and my itunes account and all are exactly the same. I need this crap fixed, how?

I keep getting an error that my billing info for my card doesnt match my bank info, but it does. Nothing has ever been changed. I called my bank, the card company, and all are exactly the same, word for word as my billing info in iTunes.
In fact, every time I get the error code that billing doesnt match, my card gets charged a $1.00 authorization fee. It later falls off, but it shows my card is being billed when they say they cant verify billing info.
I called Apple support and they want to charge me to get their crap together.
I need to do some updates and by a couple apps for work and am about ready to go to ANdroid if I cant get it fixed.
$##@@$%%$##$%%$$%$!!!!!!!!!!!

If you're in the US, this is usually caused by the simple fact that what the Postal Service shows as your address does not match what you're entering. Go here & see:
https://tools.usps.com/go/ZipLookupAction!input.action

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

HT4356 All my devices except my iPhone 4S can airprint. Only the 4s tells me no airprint printers found. I see no changes in the settings and I am on the same network.

All my devices except my iPhone 4S can airprint. Only the 4s tells me no airprint printers found. I see no differences in the settings and I am on the same network as the printer. Like I said, two iPads and an iPhone 4 airprint like a champ!

Appreciate the suggestion and tried it, but still, no joy. I even had another iPhone brought into the network and it found the printer, no problem. It's just this one iPhone 4s. Sounds like a trip to the Genius Bar for me!

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

HT204053 My wife and I are using the same apple ID. since last week, i am required to pay twice for the same app on our 2 devices (even though we are using the same ID). what can I do to fix this?

My wife and I are using the same apple ID. Up until last week we used to buy an app and pay for it only once, but use it on both devices.
since last week, the app store asks me to pay again for an app i already paid for on one device. On both devices automatic downloads (in settings) is and was always turned off.
what can I do to fix this?

Actually no. After installing an app on one device, I used to see an "install" button on the second device (since it's already been paid for). Now i get the full price button on the second device. I didn't want to proceed with the purchase because i didn't want to be billed twice.

My new Apple TV won't be recognized by my IPhone Air-Play. I made sure the home sharing is on and that both Devises are I the same network..

My new Apple TV won't be recognized by my IPhone Air-Play. I made sure the home sharing is on and that both Devises are I the same network. The IPhone see the other two Apple TVs at my house, but for some reason it won't see the third one I just added.

Check to see if AirPlay is actually turned on. (in Settings on the ATV)
Also, make sure it's not sitting directly next to your router; interference

TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

Can oracle work in shared and dedicated mode at the same time?

Hi All,
can oracle work in shared and dedicated mode at the same time?
Thanks

A database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M-

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
You're not doing anything wrong - it just isn't a feature of iOS devices.
What were you hoping a Bluetooth connection would allow you to do?

HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

Similar Messages

Maybe you are looking for