HT4437 I have a Mac, ipad and 2 Airport Express connected to 2 stereos. I would like to control my Mac itunes with my ipad using shared library. However I only seem to get one AE working at a time and unlike the Mac it will not let me select both. Any id
Hi
Running iMac, iPad/iPhone and 2 separate Airport Express, each connected to a different stereo in the house.
I would like to run the iMac itunes library remotely using the shared function on the ipad.
However when running music from iTunes on the iMac I can select speakers and both AEs so music is running from 3 sets of speakers. But on iPad I can only select iPad speakers or AE1 or AE2.
How may I get it to run both AEs please from iPad and using the Shared Function accessing the iMac itunes library?
The same applies for my iPhone 4s
Many thanks
That's not what home sharing is for or how it works.
You want the remote app.
Similar Messages
-
Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time?? Thanks Kylie
Hi Kylie,
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I have a ipad 1st gen and the app store will not let me download an older version of pages what do i do?
- Do not use Pages
- Get a newer model iPad
Not what you wanted to hear. -
My iPad hasn't been backed up and it's displaying the msg but will not let me get rid if the msg so that I can get it backed up. How do I get through this
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.
Have a look here > http://support.apple.com/kb/TS1646
-
when i try to download an app and i have entered my password i am asked to add three security questions. I can add two questions and an alternative e-mail address, however it will not let me select the third security question.
Thanks Liam. After the second ap download it asked me three security questions on iTunes and on my MAC it allowed me to set up these with no error on the third question. iPAD 3 now downloads apps fine.
Apple really need to sort out this issue or provide guidance on this. Two days of the unit not really being fit for purpose - what use is an IPAD without the ability to download aps.
Also NO Response from Apple via online tech support and it's now been nearly 24 hours - I was told by telephone support I would get a response within 24 hours or less, as also stated in the email response too!??
It would be good to get a formal response from Apple on this rather than radio silence. -
How do I remove my credit card from my account and still download free apps? because that card is no more good anymore the App Store will not let me download any apps . I no longer have a credit or debit card.so PLS help
On your iPad tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page. Or on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should also be a payment link.
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID)
If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? -
I recently downloaded 2 movies in iTunes on my windows PC and movies will not play, they will open up to the main menu, mouse overs work as well as extra features. However the main movies will not let you play. On mouse over in itunes the 'play' buttion is not enabled, yet is however enabled on previously downloaded movies.
For me I have follow several of the help articles. When I play the movie in iTunes the screen is black with no audio, the timer status says it is playing (although it does not work all the time). I am able to play and have audio on the extras. I tried to use just QuickTime to play the movie and that as well does not work. I have started iTunes in safe mode and when the movie would begin to play, iTunes crashes and I have to restart. I have tried fresh clean installs of iTunes as well as QuickTime with no luck.
It looks to be a QuickTime problem however I cant verify that. Any help would be great. -
I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?
You need to first install the OS your Mac came on the bundled gray disks. Assuming it's Snow Leopard, you could then login into the App Store using your same Apple ID and password to download and install Lion.
If your Mac is a bit older and came with Leopard, 10.5.x, you can bypass that and install Snow Leopard from your retail disk. The only software you'd need to install separately from the gray disks would be the optional software, such as the iLife suite and other titles not included on the retail SL disk. -
my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.
CALL
1-800-MY-APPLE (1-800-692-7753) let them know and they will helo you enable the account. even if you change the password 50 times the account will stay disable till you call them
good luck -
I have an Airport Express connected to my stereo and it was working without any problem.
Recently I bought an Airport Extreme to use it as my Base Unit connecting it to my DSL.
I followed the instructions of the Airport Utility, and it started working.
Suddenly, problems started happen the Airport express that was connected to the stereo , stopped working and it disappeared from the Airport Utility area , as it did not exist in the network. I tried to reset it but it did not appear in the Airport Utility page.
Apparently I have other problems with the private network that it created because I cannot use it because of problems with the password that was created. I can only use the network that I created for my guest...
I dont know if my problem is a configuration problem or there is problem with the equipment.
I read that other users where having the same problem with the Airport express , using non apple equipment as their base unit , but I thought that using the Airport Extreme was going to be compatible and no problems would happen.
What should I do?Common Problem. Common solution.
Connect your Express via ethernet cable to the Mac while other network connections on the Mac are switched OFF.
After the Express shows up, change the settings of the Express to join the existing network. Take the appr. settings.
Unplug and reconnect your Mac to the network.
Check if the Express shows up in Airport Utility
Alternative solution:
Hardreset the Express to factory settings
(while on power push the Pin next to the audio plug with a paperclip. Plug out the Express still holding down the little button then replug the Express to power and release button)
After that, the Express will show up in the Airport Utility.
Make all needed settings.
I would prefer the first solution, its easier just to plug a cat5 cable. -
My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?
Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.
-
I am trying to import my bookmarks from IE and have read the instructions, but the Import button under File is grayed out and will not let me import. Any ideas?
* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
See [[Private Browsing]] -
I recently changed my email address and the app store will not let me use my new email. I have my apple id under my new email address. Any Suggestions?
1. Sign out of Apple ID (Settings>iTunes and App Store>Apple ID)
2. Reboot
3. Sign in with new email address
Maybe you are looking for
-
Change Data Capture on a db in NoArchivelog mode
I am trying to test an implementation of CDC on a database in noarchivelog mode, but I'm not having much success. All the documentation I've read does not make it sound like it is required, but there are no guides on doing it. I am attempting to use
-
Hi, My scaner on my computer didn't open, I turned on and off everything, but nothing. I could see the scan option and click on it, but the next box didn't open properly. So I trashed the program and reinstalled, now I only have the printer option a
-
I'm new to Struts and would like to know about accessing database in struts using Data Access Object (DAO) pattern. It would be better If anybody can point me to any good source on how to write the DAO and how to configure the Struts-Config.xml in or
-
ArchiveLog deletion using RMAN
Hi, My backup failed for some time due to disk space issue which I was able to fix using setting db_recovery_file_dest_size but after the completion of backup script it didn't delete all the archivelog files. I still have log files from 05 Jan 2011 -
-
Transaction in Weblogic 5.1 Server
Hi All, Can any one tell me How to set XA DataSource details in weblogic.properties file in weblogic 5.1 server. Thanx Ramana Murthy