HT4623 After updating my Ipad now has No Sim message...

Hi.. After updating my iPad to the latest software.. I am getting 'No Sim' message... I've tried rebooting the iPad but no luck.. I've removed and reinstalled the sim?

Hey Juanita16may,
Thanks for the question. I understand that you are experiencing issues with your iPad 2 and your SIM card. The following resource may provide a solution. Keep in mind that some of the steps may be iPhone-specific, but most should be applicable for your iPad:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
1. Update your iPhone to the latest version of iOS.
2. Toggle Airplane mode On and Off.
3. Try turning iPhone off and then on again.
4. Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
5. Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
6. Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.
If your issue persists after completing all of the steps, please follow the last section to contact Apple support.
Thanks,
Matt M.

Similar Messages

  • HT4623 After updating my IPAD 64 the typing has not been the same.  It takes 3 minutes to type in my password.

    After updating my IPAD 64 the typing has not been the same.  It takes 3 minutes to type in my password.  Has anyone found a repair for this?

    Reset all settings
    Settings>General>Reset>Reset All Settings

  • HT4623 after updating my ipad some of the apps aren't usable. They are "greyed out" and it says "waiting..." below the app when I tap on it.

    after updating my ipad some of the apps aren't usable. They are "greyed out" and it says "waiting..." below the app when I tap on it.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings

  • HT4623 After update my ipad request password but i havn't any password ! What should i do ?

    I updated my ipad , after restart it requested me to enter password but i haven't any password , i enterd 0000 and 1234 but my ipad be locked !!!

    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    iPad Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 Just updated my iPad now it's telling me to connect to iTunes I don't have a computer to connect it to iTunes

    Downloaded new update now I get a screen with a plug and iTunes but nothing else help me fix it

    Unfortunately, you have to restore the iPad using recovery mode and you must use iTunes on a computer to do so. You can restore your iPad on any computer that is running iTunes, but it will totally erase the iPad. That's what would happen if you had your own computer as well, but many people would have a backup in iTunes from which they could restore,
    If you backup with iCloud, you can restore that backup after you get the iPad up and sunning again. If you don't backup, you will just have to start downloading your content again. Most of your paid content will be free to download again as long as you use the same Apple ID and as long as it is still available in the stores where it was purchased.

  • After updating my ipad 4 to ios 7, i cannot charge my ipad with the charger supplied with it,showing messages of errors of the accessories. what can I do to resolve it? my ipad now has only 2% of charge.

    After updating my ipad 4 to ios 7, I cannot charge my ipad with the charger supplied with it,showing messages of errors. what can I do to resolve it? my ipad now has only 2% of charge.Tried with lots of chargers with the same tresult.Somebody told me that it's due to the software upgradation, I have to wait for the next upgrade. need help. my ipad is dying!!!

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipadhttp://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6uhttp://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

    It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • After updating my iPad 2 it locked up and now displays an apple and a rotating busy symbol, for hours now. What can I do ?

    after updating my iPad 2, through itunes, the iPad has locked up and diplays an apple and a rotating "busy" button
    hours later it is still the same and dosen't respond to any switches. Any ideas?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Otherwise you could try this page http://support.apple.com/kb/HT4097

  • After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

    After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

    http://support.apple.com/kb/TS3694#error3194
    This might help. Good luck, I really hope this all works out. :-)

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4623 After update IOS7 my iPad mini getting slowly and all my friend online on Facebook cannot show?

    After update my iPad mini getting slowly and all my friend chat online never show on Facebook screen? How to fix all of this? All the video I have stop and play and getting long to play....please help me...before update IOS7 I have no problem at all...

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    How to Fix a Slow iPad
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
    iPad running slow? How to speed up a slow iPad
    http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
     Cheers, Tom

  • After updateing my iPad Air 2 to iOS 8.3, it no longer works

    After updating my iPad Air 2 to iOS 8.3, it no longer works.  It is a 64 GB model.
    The opening screen is the same as when I first starting using it, with "welcome" in various languages.
    I have gone through the operations requested, iCloud, etc. but at the very end I get my home screen for about 1 second, then the machine shuts down.
    I backed up and synced the iPad before installing iOS 8.3, and tried a restore, but it made no difference.
    You guys out there have never let me down yet!  I hope you can help!
    Thanks in advance.

    You're not alone in this problem.  My iPad Mini 3 was working great until the iOS 8.3 update, which kicked into the same loop you're describing.  Sounds like at least one person has had luck with factory restore.  Check out the thread here:  Anyone else seeing issue with iOS 8.3 update on iPad Mini 3?

  • After updating my iPad 2 to iOS 6, I cannot connect to my router.  I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works.  Any other suggestions?

    After updating my iPad 2 to iOS 6, I cannot connect to my router.  I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works.  Any other suggestions?  It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

    I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

  • HT201263 after updating my ipad 2 to ios7 it keeps shutting off and turning on

    after updating my ipad 2 to ios7 it keeps shuttingn off and turning on.

    Hey moniemack,
    When troubleshooting power issues, the following article provides the most relevant information. While it pertains to iPhones, most steps are applicable for an iPad:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

Maybe you are looking for

  • Error message "SE 518 No account assignment exists for service li ne 000000

    Hi All, Customer is using SRM 7.0 Self-Service procurement Shopping cart created with multiple service items, once it approved. We get the Error message "SE 518 No account assignment exists for service li ne 0000000000" in Shopping cart Monitor. Coul

  • FTP error in SAP PI 7.0

    Hi, PI 7.0 under OS Windows 2003 server, just want to cvs format file transfer to other server in operating system (using same network) via FTP + SAP I got that messages error messages: "Message processing failed. Cause: com.sap.aii.af.ra.ms.api. Rec

  • Husband/Wife workflow using library merges - feasible?

    The problem I have been banging my head against a wall for weeks now to see if there is any way to resonably manage our family's photos together, from our separate iPhones and laptops. It's well documented that Apple has not made this easy, but I'm t

  • Buttons dont work

    Hi, When i click the buttons on my ipod, then do not do anything. The scroller still works though. It can connect to my itunes, but i can't do a reset by holding the select and play buttons. Has anybody had this problem before? Does anybody know how

  • RMIregistry: Port 1099 already in use

    When I start rmiregistry, I get the following exception: java.rmi.server.ExportException: Port already in use: 1099 What could be using Port 1099? How do I find out the mapping between ports and services? Thanks?