HT4623 Hello there.. I want to update my ios from ios 3 to ios 5.... But I can't find software update at my general setting? Wahat should I do? Thanks...
Hello apple... I can't find software update at my general to update my ios from 3.21 to ios 5... What should I do? Thanks before
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Similar Messages
-
I just upgraded to the iPhone 6 and before I delete my old phone, I want to make sure all my photos were in icloud, but I can't find them anywhere. Why? I know it may take weeks to download my 14,000 pics, but I want to make sure they're there.
Extract the photos from the phone to your computer like you would with any other digital camera.
PhotoStream is NOT permanent storage and iCloud photos is in beta, meaning it's not fully cooked yet and you may lose data stored in it. -
Hello everyone, im using iphone 4, my problem is that i cant update my iphone from 5.0.1 to 5.1.1 while using software update in settings on my iphone please help......
Downgrading to a previous version of iOS is not supported.
Sounds like your iPhone was hacked/modified/jailbroken to work
with wireless carrier other than the one it was purchased from. The
update has relocked it to the original carrier. Contact the original
carrier to see if they offer unlocking and if you qualify - only the
carrier to which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Be advised that the previous modifications to change from original carrier
to your local Carrier may have rendered the iPhone unable to be
officially unlocked. -
HT4623 How can i install ios if i can't find software update in my ipad ?
Dear Sir,
How can i install ios if i can't find software update in my ipad ? No software appear after i go to General = ??
Thanks.If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I can't find software update on my general tab. ***?? It's an iPad...like the very first old school one. Remember those? Lol
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.
Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support -
HT4623 Where can I find Software Update on my IPhone 4?
Where can I find Software Update on my IPhone 4?
It was not included until iOS 6.
Connect to a computer running iTunes to update. -
HT4623 i can't find software update on my general settings ipod touch. how to update my ipod
i can't find software update on my general settings ipod touch. how to update my ipod
iOS 4: Updating your device to iOS 5 or later
Summary: Connect your iPad to a computer running the latest version of iTunes and your update options will appear.
Here are the last OS versions for each iPod generation:
An original iPod Touch can run iPhone OS 3.1.3
2G model: maximum iOS 4.2.1
3G model: maximum iOS 5.1.1
4G, 5G can run iOS 6. -
HT4623 I can't find " software update " in my I pad setting
I can't find software update column in my I pad
If you do not have iOS 5 installed, you won't have it.
-
I can't find software update in general icon in the setting, what can I do
I can't find software update in general icon in the setting, what can I do
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
1. Go into the iPad's Settings.
2. Locate and tap "General" from the menu on the left.
3. The second option from the top is "Software Update". Tap this to move into the update settings.
4. Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
5. Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
1. If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
2. Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
3. After canceling the dialog box, iTunes should automatically sync with your iPad.
4. If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
5. After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
6. From the iPad screen, click on the Update button.
7. After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
8. After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
HT201263 I can't find software update option in general in settings???
I can't find software update option in general in settings???
If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
See here: http://support.apple.com/kb/HT4972 -
Can not find software update on my i pad
Can not find software update on ipad
The Software update option was only added in iOS 5. It did not exist before that.
Assuming you have iOS 4.3 as your tagline suggests. You'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
iOS: How to update your iPhone, iPad, or iPod touch
Scroll down to the section titled: Update your device using iTunes -
HT1222 where can i find software update in my iphone 4..cant find it.
I want to buy some ringtones from itunes..but it aska me to update my ios..how can i update it and where can i find software update .. in my i phone 4.
Open itunes, connect iphone
-
HT4972 I can,t find software update in my setting ,general menu.
I can,t find software update in my setting, general menu ..only about then usage ..so how can I download ios5 ?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?
You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models
Maybe you are looking for
-
Reversion to Photoshop CC trial
Hi I'm new to this. I had Photoshop CS3 full version installed and subsequently bought upgrades to CS 4, 5 and 6. I've licensed Photoshop CC since June 2013. Recently I uninstalled the unwanted back copies of Photoshop, leaving just the CC versions o
-
I downloaded some photo's some time ago from my sony digital camera to my mac. I was recently printing off some photo's taken using the same camera on the same day. Some photo's printed fine no problem however some photo's looked great on the mac sc
-
Using a SDO_FILTER in a JDBC GeoRaster Query
Hi, I have the following query which works perfectly: http://192.168.33.52:8888/mapviewer/wms?REQUEST=GetMap &SERVICE=WMS &VERSION=1.1.1 &LAYERS= &mvthemes= <themes> <theme name="geor_theme"> <jdbc_georaster_query jdbc_srid="8307" datasource="WMS" ge
-
Dear, I try to print out the Vector of my storage but nothing. Please help and advise 1. add class import java.io.*; import java.util.*; public class AddStudent public AddStudent(Vector a) String tempId; String tempName;
-
userlib files not being found in built application
Version: 2012 SP1 f5 Key Words: Build Application, <userlib>, DAQmx I have a project with a Main.vi and and a Sub.vi, both of which make multiple calls to DAQmx vi's in libraries (*.llb). The project is located in ...LabView 2012\user.lib\this\this.l