HT4623 i installed the most current update on my ipad and now it is locked up and I can't do anything with it. what do i do?

I installed the most recent update and now my ipad is locked up. There is an itunes logo and what looks like a picture of the ipad power cord on the screen, nothing else. If I plug my ipad into my computer, nothing happens. If I turn it off and back on again, I get the same screen. I have no idea what to do.

Hi ocholocoperros,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you're only seeing the "connect to iTunes" screen:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy

Similar Messages

TS3694 I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?

I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

TS1398 I installed the iOS 6 update for my ipad 3, now it will not connect to the internet. Has this happened to anyone else?

Actually I cannot access my home wifi from my laptop or cell anymore either.
I reset the modem and router about 10 times and called my ISP who said there's no problem on their end.
I've tried everything I can think of. Any advice?

Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
If that doesn't work, then update iTunes on computer, backup device to iTunes, then restore the device.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US

I just installed the most recent update. Now Firefox tries to start and then locks up.

I just installed the most recent update. Firefox starts to load and then locks up. Cannot get homepage to load or go to any other websites.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up

HT1918 apple tv will not allow me to purchase a show. It tells me to verify my payment information on the computer which I have done several times. I have installed the most recent update and restarted it. Any ideas?

My G2Apple TV will not allow me to purchase a show. It tells me to verify payment info on my computer which I have done several times. I have installed the most recent update and restarted. Any ideas?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

Since installing IOS7.0.2 my iPad keeps rebooting itself every few minutes. I can't do anything with it and cannot download the new IOS7.2 because it doesn't run long enough to accomplish the download. What can I do?

Since installing IOS7.0.2 my iPad keeps rebooting itself every few minutes. I can't do anything with it and cannot download the new IOS7.2 because it doesn't run long enough to accomplish the download. What can I do?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

What is the last version update in apple tv and how can i know what is my Operating System

What is the last version update in apple tv and how can i know what is my Operating System
i have an apple tv 3
thx

6.1
Settings > General > About > Apple TV Software

HT1212 So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Hello. I have a problem. I live in Armenia, now I am in Guangzho (China) and i have lost my Iphone 4S. Tryed to find in icloud, no result. it seems the finder has switched off or deleted my apple ID. Please help me. Can I do anything with IMEI code?

Hello. I have a problem. I live in Armenia, now I am in Guangzho (China) and i have lost my Iphone 4S. Tryed to find in icloud, no result. it seems the finder has switched off or deleted my apple ID. Please help me. Can I do anything with IMEI code?

IMEI number is no use.
If you can't track it using find my phone.
Then report the lost to the local authority and your phone carrier.
change your passwords.

When I unplug my headphones from my iPod touch 4G, it goes from the apple screen to the lock screen and i can't do anything with it. It's only about a year old..why is it doing this?

When I unplug my headphones from my iPod touch 4G, it goes from the apple screen to the lock screen and i can't do anything with it. It's only about a year old..why is it doing this?

Have you tried restoring to Factory Default (setup as new).

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

Tried to install the most recent update and now my ITUNES won't load. Getting an error message that says there is a "runtime error" and that I need to reinstall INTUNES. Help!!!

Tried to install the latest ITUNES update, but now it won't open my ITUNES at all. Saying I have a "Runtime error" and that I need to reinstall ITUNES. Tried a "repair" in Programs on my computer, but that didn't work either.

Hello joeydak,
We've an article that provides troubleshooting steps which can help get iTunes back up and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

I cannot install the latest software update on my iPad - why?

please advise why I am unable to install the latest software update on my ipad

hi i think we want some information about your device
but those might be problems
            1.you ipad is updated to latest version
            2.low space in disk drive
            3.your device isnt a original one
send some pics of error massage or send the error massage i will be use full to solve your problems
                                                                        regards

HT4623 i installed the most current update on my ipad and now it is locked up and I can't do anything with it. what do i do?

Similar Messages

Maybe you are looking for