HT4623 What if the iPad dint have update on the iPad

How can  update my iPad but I went on my setting to find it but I can't

Connect your iPad to a computer running the latest version of iTunes and then check for an update...  Viola, you're done.

Similar Messages

  • HT4623 what if the software update isn't there?

    what if the software update isn't there ?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • HT4623 what if you don't have wifi and you have the phone connected to your computer

    What if you don't have wifi and you want to update your iphone 4s and it is hooked to your computer

    Connect to iTunes, once you have the phone connected to iTunes, select it in the device pane, then in the Summary section select Check for Update.

  • HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    Read http://support.apple.com/kb/ht1808

  • HT4623 What are the benefits of updating to the iso8 software

       What are the benefits of updating to the iso8 software

    hi Molly!take a look here http://www.apple.com/ios/

  • HT4623 what does the mm stand for on my model of ipad mini?

    what does the mm stand for on my model of my ipad mini that is also cellulat?

    Copied from another discussion, from Phil0124
    The MM or Millenium Media according to what I can find, refers to the CDMA variation of the Cellular iPad for Verizon Networks.
    The non MM version is for GSM carriers like AT&T.
    https://discussions.apple.com/thread/5093889?start=0&tstart=0

  • HT4623 What is the most current iOS version for iPhone 3G?

    I have an iPhone 3G, what is the most current iOS version? I have 4.2.1 and when I tried to update, iTunes says that I have the current version. I can't seem to download any apps with 4.2.1.

    That is correct,
    The last release of iOS to support the 3G model was 4.2.1, released on November 22, 2010
    The 3G model is now 4 and half years old.

  • HT4623 what is the latest firm for iphone 3gs

    I want to upgrade the firm on my iphone 3gs. What it the latest firm upgrade for this phone? Am i will be able to get all those cool feature with the latest upgrade

    Not all features are available but you can update to IOS 6.1.3 for your iPhone 3GS.

  • HT4623 what's the highest version of operating system that the 3gs can support?

    I'd like to update my iphone 3gs, what's the latest ios version it can handle?

    Thanks! I did a bit more investigating after posting and found the answer, appreciate your response though. Should I anticipate any issues? I'm using more as an itouch now since I've purchased the 4s as my primary phone. The 3gs was getting terribly sluggish. I hope this doesn't make it even worse.

  • HT4623 What is the cost to replace iPhone speakers

    What is the cost to replace iPhone 4S speakers

    Clean the dock connector with a soft, dry brush.  Clean out the headphone jack.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    Deciding that a hardware issue exists before doing basic troubleshooitng is just jumping to conclusions.

  • HT4623 What if your ipad doesn't have the softwear update bar on it in the genral settings... How do you update from he 4.3.3 version??

    I really do not understand how to update my ipad i still have the4.3.3 version. How do i update it to the ios 6?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 What if the update stalls and it requires me to restore my ipad

    My ipad did not update and it says I need to restore the settings - What should I do I do not want to lose all of my data

    Its telling you to restore the iPad software - not the iPad settings. Did you connect to iTunes and try to restore?
    There is no way to get around this issue. If you didn't backup your iPad, then yes you will lose all of your app data and app settings and you will have to start all over again. If you sync with iTunes, you should have some sort of backup and your apps and other content should be in the iTunes library to sync back to the device after you restore. If you have been using iCloud for your backups you can restore from that when the restoring of the software is complete.
    But the bottom line is, no matter what you have or haven't done. You must restore the iPad with iTunes now or you will not be able to use it.

  • HT4623 What if my iPad does not have a software update tab?

    What do I do?

    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 What if i don't have the settings/ general/ software updates option how do I update ios or itunes.

    How do i update ios 6 if i don't have the settings/general/software updates tab?

    Scuart wrote:
    How do i update ios 6 if i don't have the settings/general/software updates tab?
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT4623 What if you do not have a software update prompt in the general screen...how do you install iOS 5?

    I am trying to download IOS 5.1 on iPad2 but do not have a software upload prompt in the general screen.  How do I upload IOS 5.1 without this prompt?

    Connect the iPad to your computer and launch iTunes, click on the iPad name on the left side under devices and then click on the Summary Tab in the iTunes window on the right. Click on Check for Update. After you install iOS 5 on the iPad, then you can update in the future right from the iPad in the Settings>General>Software Update.
    Make sure that you are running the latest iTunes on your computer before you update the iPad.

Maybe you are looking for

  • BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

    Hi, I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) . Please could anyone help me with this . Regards, Sushanth H.S.

  • Question on Dynamic Query Data Source and Form Folders in Oracle Forms 6i

    Hi there - I have one interesting requirement in Oracle Forms. This is what I wanted to do. 1. Have a LOV and Go button on Form. 2. From LOV, I will select a pre-defined custom table and click Go. 3. Based on the selected custom table, I have to popu

  • Change Labels drops renders: non-rant

    I'm working in a sequence that is full of complex effects and it's all rendered. If I open Item Properties for any clip in this timeline and select logging info and change the label color, FCP will drop the render file. Why would FCP do that? I've be

  • My iPod only connects to my computer as Removable Disk (E:)

    A few days ago I updated my iPod G5 with itunes and everything was working perfectly and as it was finishing, it said something about not being able to update or something like that. Now, everytime I connect my iPod to my laptop, it just shows a "Saf

  • Non Database Item in RowsetInfo

    Hi, I've already posted this problem of including non base table items in RowsetInfo based gridControl and I got the answer that this functionality will be provided in next version ( 3.0 ). I tried working on it with query like "select EMPNO, ENAME,