HT4628 I continuously have to restart my iMAC for wireless connection. I am EXTREMELY new to the iMAC. Does anyone have the fix for this issue?
I continuously have to restart my iMAC to obtain my wireless connection. I am EXTREMELY new to iMAC. Does anyone have the solution to this issue???
Yes, have your network person turn off "hidden" or "invisible" on your WiFi router.
Tell them to see this
WiFi security issues, at home and WiFi hotspots
Cheat sheet to help diagnose and fix your Mac
Most commonly used backup methods explained
Similar Messages
-
Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?
Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?
Why not? Are there error messages? Where are the files located? Why are you deleting MicroSoft Word files?
-
I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?
I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved
-
Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
Background:
Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
Thanks!Thanks for your feedback. I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.
-
I can't get Window's Media Player to "recognize" my new ipod shuffle. Does anyone have a solution? When I pull the ipod shuffle up in Devices and Printers, it says it needs Troubleshooting, but the Troubleshooting provides no solution.
Windows Media Player? As far as I know, that won't work. You need to install iTunes
http://www.apple.com/itunes/
That will install the software you need to use your shuffle with your computer. -
Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
what do you mean by the obvious?, it's a permission issue, ARD must run as systems administrator to boardcast, tunnel IPv6 calls, etc.
-
i have just put a £50 voucher onto my itunes account but when i have went to rent a movie on apple tv it says i have to verify the voucher does anyone no what to do please
Hey there Kenspendiff,
It sounds like you added credit to your iTunes Store account but in iTunes Store on the Apple TV you are being prompted for a verification. I would start by double checking that the gift has been redeemed to your account with this article either on your computer or iOS device:
iTunes Store: iTunes Gift balances
http://support.apple.com/kb/ht5035
If so, then Restart the Apple TV:
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
Restart your Apple TV by selecting Settings > General > Restart.
If the issue persists, would you mind elaborating what the message says word for word?
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?
I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
Try the Zimbra support forums. I found this excerpt from a relevant post:
http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
in which the following ports were suggested
ports 25, 465, and/or 487 to send mail.
port 143/993 to retrieve mail over IMAP -
I have a Canon MG6120. When I start it I get error code 5050. Does anyone know how to resolve this?
I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
Solved!
Go to Solution.Hello gregg.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, the unit will require service for correction. We apologize for this inconvenience. Please contact our support group using the "Contact Us" option below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck. -
Safari missing
After a recent upgrade, I noticed that the safari app was missing. I can't find it anywhere to reload it. Any suggestions?It's a built-in app so it won't appear in the store.
If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Safari being set 'off' ?
If not then have you tried a reset to see if you can find it after the phone has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
When i am listening to music from iphone, teh sound is greater than the vocals. Does anyone else have this problem and if you do, how do I fix it, it's somewhere in the setting i believe
Plug the headphones all the way in.
-
Hi,
I have a macbook pro and when making outgoing calls on facetime I get to connecting but it never does connect, however I can receive incoming calls. Any suggestions please?Hey there kakitiga,
It sounds like you are trying to make a call with FaceTime, it never finishes connecting to the person you are trying to reach. I want to recommend the troubleshooting steps from this article named:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
Thank you for using Apple Support Communities.
All the best,
Sterling -
I bought the new ipad this weekend and had £15 credit. For some reason it charged 13 items to be credit and debit card and did not load the item onto the ipad- does anyone know how I can get this credited?
More update on y situation. Now on both the IPAD and IPAD2 I can not got to view my purchase History, it says it can not connect to the ITUNES store, but yet I can still d/l apps and can view my account etc etc etc.
Maybe you are looking for
-
Windows Server 2008 R2 - Won't load certain web pages
Users are unable to access certain websites from either of our RDP session servers (Windows Server 2008 R2 Standard with SP1). 1.) I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, the
-
Keep getting an HP update for 10.6.8 and I'm on Lion. How do I stop this?
My MacBook Pro came with OS Lion installed, but almost every day, I get a notification to download and update for the previous OS for my HP printer. How do I stop this from trying to install on mt system?
-
External monitor not going full resolution on extended desktop
Hello, I have a Gateway widescreen 1680x1050 resolution monitor plugged into my 13" Macbook Aluminum computer. When I have both my external and built in display turned on extended mode, my external monitor only goes up to 1600x1000 resolution, which
-
Best way to backup files without admin rights
We have quite a few MacBook Pros. We do not give our users admin permissions, so they can't use Time Machine to backup their user files while on the road, and honestly I wouldn't want them using Time Machine as that backs up the entire machine from
-
I have an old Minimac with a 100GB HD. I run Time Machine to an external HD. I want to update my Lion software but need 8GB of HD capacity to do this. I only have 5GB. My photo library is 4GB so since this is backed up I deleted this to Trash. But I