HT4718 I am trying to do a re-instal of Lion to my MacBookPro purchased June 2012

I had a problem yesterday following a standard software update for Lion on my new MacBookPro. When it went to restart it crashed and I cannot get it to load properly. I have tried disk repair but it fails to repair the disk. So I have resorted to an attempt at recovery by Command + R at start up.
This allows me to choose to reinstal Lion and after verification and acceptance I am met with 'The disk is locked' - How do I unlock or how do I proceed please. If all else fails I do have a Genius appointment booked for Tuesday but would rather recover the machine before that if at all possible.

Try the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
You can try the folloing while booted to the Recovery HD if the disk is still shown as locked:
Fix Permissions for a Locked Drive
Open Terminal in the Utilities folder. Paste the following commands at the prompt. Press RETURN after each. The first command will prompt for you to enter your admin password. It will not be echoed to the screen. After entering your password press RETURN again.
sudo chflags 0 /Volumes/*
sudo chmod a+rx /Volumes/*
killall Finder
An alternative is to download BatChmod and use it to fix the permissions.
There are spaces in the command lines. Be sure you enter them as written or better yet copy and paste them into the Terminal window.

Similar Messages

My Macbook Pro 2012 won't turn on. Tried CMD R and re-install Mountain Lion. Now I get always get a message: Macintosh HDis damaged. But when I repair HD, It says it's OK. What Can I do? I've been with this all day. Replace HD?

Tried as wel PRAM. CMD +S. Tried D key and it blocks when testing... I' going mad!!!

Guess your harddrive is busted. You'll have to get it repaired.

Trying to upgrade from snow leopard to lion. Father already purchased Lion online a few months ago but did not use upgrade (did not know cmp was already running on lion). How can I use his upgrade on my computer without having to buy another Lion upgrade?

Hi,
Basically my computer is running on Snow Leopard. My father bought the Lion upgrade to install on his computer, however, it ended up being that his newly purchased lap top already came running with Lion -- thus, he never ended up using the Lion upgrade he purchased. Now, I would like to use the Lion upgrade he purchased but did not use to upgrade my computer to Snow Leopard. The information he gave me for this was the Web Order Number, Part Number, and Content Code for the Lion upgrade. How do I redeem/use his upgrade to update my computer to Lion without having to purchase another copy of the Lion software from the App store? Is that possible?
Thank you so much!!!

Unless he controls your machine (same household), you can't. At $30 USD, pop for your own copy.

TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades.

I am trying to do a clean install MacBook Pro

I am trying to do a clean install on my Dad's older MackBook Pro. He downloads things he shouldn't and after frustrations trying to wipe ou trojans and bad files I just decided that the only way to make this thing work again is to clean install it. It was already running yosemite when I started.
I followed the directions at
www.osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
I used a flash drive to install os x yosemite installer and made it bootable per the instructions on the site.
Everything seemed to work fine, I loaded the drive as the statup disk, I erased the partitions and the hard drive with disk utitilies using the installer flash drive.
However when I try to start to Install Os X it runs for about 10 minutes and then gets stuck at "one second left" I accessed the log errors and got this
Apr 19 21:01:40 MacBook-Pro.local InstallAssistant[415]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IASetupWindowController) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistProgress) outlet from (IASetupWindowController) to (NSProgressIndicator): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistView) outlet from (IASetupWindowController) to (NSView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (subtitle) outlet from (IASetupWindowController) to (NSTextField): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IAContentView) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.708 InstallAssistant[415:17328] ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981cbde640 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.712 InstallAssistant[415:17328] ***cachedResponseForRequest:key:handler failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981ce92fe0 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:50 MacBook-Pro.local InstallAssistant[415]: GetDYLDEntryPointWithImage(/System/Library/PrivateFrameworks/CacheDelete.framew ork/CacheDelete,CacheDeleteCopyPurgeableSpaceWithInfo) failed.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Apr 19 21:03:44 MacBook-Pro.local Unknown[397]: 2015-04-19 21:03:44.052 InstallAssistant[415:17320] Layout still needs update after calling -[NSScrollView layout]. NSScrollView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
I already have his pertinant files back up. I just need to install a new system on this empty hard drive. What did I do wrong?
Matt

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

Bought a refurbished Macbook without operating system. Trying to get an OS installed but all I get is a white screen?? HELP!

I purchased a refurbished Macbook pro without operating system.
This is my first Mac, but have heard they are very simple and much more intuitive than Windows,
I've had the machine for three weeks now, and it's been nothing more than a paperweight!!
A friend said he had his old install disks, which happened to be exactly what google said I needed to start out as: version 10.5
When I boot holding the OPTION button down, I get two options. Windows (with an up arrow below it) and Mac OS x Install Disk 1 (with an up arrow below it).
I can move the mouse, and move the cursor with my arrow keys, to select either Windows or Mac OS install. The problem is - if I select the Mac OS install,
the disk starts up (I can hear it), but it never does anything. I can no longer move the mouse / cursor after selecting it. It will stay for hours like this with no progress.
On the disk itself, it says MAC OS version 10.5. This software is part of a hardware bundle purchase - not be sold separately.
It also says: to start up from Mac OS x, hold down the C key as the computer starts up. When I do that, all I get is a gray screen.
I've also tried the shift key when starting up (supposed to be safe mode?) but same thing - gray screen.
The only way to even eject the disk (scared the heck out of me) is to start up holding the OPTION button.
If I select WINDOWS after using the OPTION button, I get an IBM message:
IBM Secure Data Disposal Utility 2.0
IBM Remote Deployment Manager 4.1
Date and time of execution...7/24/12 18:01:22
Command executed................A:\SCRUB3.EXE /d=all /l=2
Return code...............................0
I assume this is what they used to wipe the hard drive before sending...
Obviously I am Apple-illiterate, but I've spent days going through chat rooms, etc. and came up with nothing.
At this point, I suspect either:
1) The machine is junk and needs to be returned OR
2) The disks are bad and/or can't be used for a clean install
I don't want to waste money buying a brand new OS, only to find out that the machine is bad.
Any thoughts??

That model originally shipped with a special Intel version of Tiger. You should be able to install any retail version of Leopard or later. I would recommend you start with Snow Leopard. Snow Leopard requires a minimum of 1 GB of RAM. If you have 2 GBs of RAM then you could install Lion or Mountain Lion.
You can purchase Snow Leopard from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
When you receive the DVD:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Complete the Snow Leopard installation.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion. Help??

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
I was working on a project, when all of a sudden the event library went blank. There are no devices showing in the left column, only "last import" and "aperture videos". There are no video clips in the editing window. I have "Show: All Clips" selected. I've tried "group events by disk".
When I have a Project open, it plays just fine. There are no yellow triangles saying "source clip is missing". Yet, again...nothing is in the event library large editing window. So, it seems the data is still there, but invisible. This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library.
I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library. I've tried importing movies from the harddrive, from quicktime, and from an external drive.
I have searched the forums, and found many users with a similar, but not the same, problem. For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem. This didn't work for me.
I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician).
HERE'S AN INTERESTING DETAIL: After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have. I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive. So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine. I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!! I can't believe this.
Does anyone have any suggestions? Have you ever heard of this happening? Could it have to do with the files I'm importing???
I apologize if my language is confusing. Obviously, I'm not an Apple genius-person! I hope I've provided all the information you need.
Mac #1 is a 27" desktop, mid-2012, software up-to-date. Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

I get this error message when trying to start Itunes - "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6034 Anapplication has made an attempt to load the C runtime library incorrectly. I have tried to have iTunes re-install and correct.

I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am running 10.5.8 on my 17" mac pro laptop and using Firefox 3.6.17, I have tried on several occasions to install ver 4 and when I drag icon onto my applications folder it tells me I have a newer version already there. What is going on?

I am running system 10.5.8 on my 17" mac pro laptop and using Firefox 3.6.17, I have tried on several occasions to install your new version 4 and when I drag icon onto my applications folder it tells me I have a newer version already there (which is now the 3.6.17). What is going on?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Help Please! Trying to do a clean install of Snow Leopard on a new drive

I'm trying to help a family member with his Mac Mini.
He installed a new HD and we're trying to do a clean install of Snow Leopard from the DVD. I've tried booting to the DVD by holding the C key during boot up and that does nothing. I've tried mounting his HD on my Macbook and installing that way and that doesn't work either.
How do I install this if you don't have an OS on you drive to boot up to?

Michael Brown1 wrote:
I was able to boot it in target disk mode by holding T. I formatted the drive as Mac OS Extended (Journaled) I've read in a couple places about GUID but I can't find that as an option on the Disk Utility.
Partition tab, Options button.
Is it possible to load the OS onto the Mini from my Macbook? I can see the installation DVD and the HD on the mini from my Macbook, but when I try to install I get a warning that it can't be installed on that volume.
It's been a while since I tried something like that, but it worked in the past. It may be complaining because the partition table is not set correctly.
I couldn't find anything about installing on another drive. I did find this old [MacFixIt article|http://reviews.cnet.com/8301-13727_7-10329087-263.html] that you might find useful if you've got an external drive. Essentially, you partition it (not necessary for what you want), make an image of the Installer and then restore the image to the external drive. You can then use that drive as the boot drive. That was for Leopard, so I don't know if it will work.

HT4718 I am trying to do a re-instal of Lion to my MacBookPro purchased June 2012

Similar Messages

Maybe you are looking for