HT5262 hello i have a ipod 2g and it has been stuck on the connect to itunes for 3 days straight now what should i do
I need help on my ipod touch 2g it has been frozen the last two days it froze on the connect to itunes logo
Try a restart (I've had to do this myself, yesterday).
If that doesn't work, try connecting it to iTunes (as it suggests).
If that doesn't work, you could try waiting for the battery to drain and then the iPod will turn off. Then put it on charge as see if that sorts it out. (It should).
Similar Messages
-
when i try to reset my ipod it stops at 10minutes and the ipod turns itself on and acts like ive done nothing to it, it has been stuck on the "connect to itunes screen" and it wont reset. why?
After you place the iPod in recovery mode using
iOS: Unable to update or restore
You have to then connect the iPod to your computer and restore via iTunes. Are you doing that? -
My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!
AT this point whatever data you have on yoru phone is already gone since it is in recovery mode.
However you can restore from your backup, when your phone reboots from recovery.
YOu do have a backup right? -
I went to update my software for my iPad 2 and my ipad has been frozen for hours on the connect to itunes screen. I unplugged it and tried to recover it but it doesn't work. When I connect it back to my computer it says ITunes has detected an ipad in recovery mode. You must restore this ipad before it can be used with itunes.
Can anyone out there help?kokodeelish wrote:
When I connect it back to my computer it says ITunes has detected an ipad in recovery mode. You must restore this ipad before it can be used with itunes.
If this message appears - did you try to restore it with iTunes? -
I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.
Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem. -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
Windows 8.1 update has been stuck in "Preparing to install" mode for 3 days now and I cannot stop it
My Windows 8.1 update has been showing "Preparing to install..." for 3 days now. When I click "Stop installation" it says I need to provide administrator permission and doesn't have any way for me to provide this. My account is the administrator
account for my laptop.
I have already seen a similar thread that said to open a command prompt with admin privileges and type "slmgr -skms", but the solution did NOT work. Basically, it said the usage was incorrect and popped up 5 windows of information that I didn't
know how to interpret (yes, I tried to provide the options it wanted, but they were incorrect).
Any advice would be appreciated!Ah! This did the trick! Thanks!
In case anyone else has this problem, on Windows 8.1 I had to open up the Control Panel, then type "troubleshooter" in the search box. I clicked "Troubleshooting" and then found "Fix problems with Windows Update" under the System and Security section. -
My Ipad has been stuck on the connect to Itunes screen now for days, it will not charge through the PC or wall charger. When plugged into the PC it is not recognized by it. Itunes doesn't see it and it will not let me reboot the system. How can I get past this so I can start using it again?
Hello Aloe_85,
This screen indicates that your device must be restored before it can be used again. The steps detailed in the article below can help get your iPad to reappear in iTunes so that it may be restored.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?
I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?
What happenw when you try to turn it off?
iOS: Screen does not rotate
Not all app have a landscape mode. -
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
I have an iPod touch and wife has a new ipad2. We share one computer. Now, when she downloads an app to her ipad the app also downloads on my iPod touch. How can we stop that?
you should have two separate account
-
i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!
It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock -
I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?
Matthew...
Try here > iOS: Troubleshooting Wi-Fi networks and connections -
Hello, I have an iphone 4 and it has recently come up with the connect to itunes logo. When I connect it to my computer, itunes comes up with there is a problem with your iphone. What should i do? I need help ASAP
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Maybe you are looking for
-
Action &OBJECT_ID& does not exist - when Filtering Table
Hey Everyone, I am trying to implement filtering on a table (not alv).. i have followed the example in DEMO_TABLE. - have put the method in WDDOMODIFYVIEW, bound the filtervalue of each column, and implememented a toggle butt
-
Noob Needs Help! Please Please Please Help!
MD doing reserach on Genetic Mutations, I really need help on this, I have never used PL/SQL. Can somebody help me with this? I have a view made of mulitple table that has following columns: diagnosis, patient_id, kindred_id, column_d, colum_e.... co
-
Hi i have created a GR (migo) and in this step i have also captured the excise invoice. QC people done the UD. after that i came to know that GR is wrong. now i want to cancel the GR. and make the new GR against the same PO. Thanks & Regards Pankaj G
-
My account is apparently blocked...
on my iPhone 4, but NOT on either my iPad or my new Touch. All the devices use the exact same iTunes account information. On the iPhone I now cannot update apps, purchase apps, or make in-app purchases. I can do all these things on both of the other
-
Apex 4.01 Tabular Form Issue javascript
We have moved an apex 3.2 application to apex 4.0 and we have some problems with the new ordering of the G_Fxx-Colums as described in another thread. There is another thing we do not understand: The SQL-Statment is like select a, b, apex_item.text(40