Action &OBJECT_ID& does not exist - when Filtering Table

Hey Everyone,
I am trying to implement filtering on a table (not alv).. i have followed the example in DEMO_TABLE.
- have put the method in WDDOMODIFYVIEW, bound the filtervalue of each column, and implememented a toggle button to show and hide filter row and gave it a filtering function.. - basically exactly like DEMO_TABLE.
but, when i enter a filter value.. i get this error.
The following error text was processed in the system LXA : Action &OBJECT_ID& does not exist
The error occurred on the application server vmsaple07_LXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER=============CP
Also, something else thats not right is.. if i put an action under ONFILTER of the table.. The filter row appears when i am on Workbench... BUT when i test the application on the browser, the filter row doesnt appear!.. it did appear once, but its not appearing anymore.
Thanks...

hey, i figured it out.. My problem was in this part of WDDOMODIFYVIEW...
Set or cancel the table's filter action
IF l_is_filter_on = abap_true.
l_table->set_on_filter( 'FILTER' ).
ELSE.
l_table->set_on_filter( '' ).
ENDIF.
You must pass the name of filtering action in the above code.. Just create an action(like below), and pass the action name to the - l_table->set_on_filter( 'FILTER' ) - in WDDOMODIFYVIEW.
method ONACTIONFILTER.
wd_this->table_method_hndl->apply_filter( ).
endmethod.
Edited by: imatari on Jul 24, 2010 7:25 PM

Similar Messages

Action &OBJECT_ID& does not exist - when Scrolling the Scrollbar in Table

Hi All,
When executing the application of ABAP webdynpro component at runtime when we scroll the scrollbar of the table then we are getting the following dump. please let me know the solution to fix the issue.
Thanks in advance.
Dump
The following error text was processed in the system BRD : Action &OBJECT_ID& does not exist
The error occurred on the application server c700u043_BRD_10 and in the work process 1
The termination type was : RBAX_STATE
The ABAP call stack was:
method : IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
method : GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER----CP
Thanks,
PortalUser100

Hi..
I dnt get anything when i see the error, its like somewhere standard error. And are you trying to scroll horizontal or vertical scroll?
Any way, we can achieve scrolling through one application parameter called wdtablenavigation and its value is SCROLLBAR.
then you will get scroll bar for all tables in your component.
Once you double click on appplication,you will find parameters tab, there pass the above values.
Regards
Srinivas

Error: While Opening a Custom view- Action &OBJECT_ID& does not exist

Hi Experts,
On the click of button, I am creating a window and opening as follows:
wd_comp_controller->go_window         = lo_window_manager->create_window(
                      window_name            = 'ZW_CERTIFICATION_POP'
                      title                  = lv_pop_title
                      close_in_any_case      = abap_false
                      message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                      close_button           = abap_true
                      button_kind            = if_wd_window=>co_buttons_okcancel
                      message_type           = if_wd_window=>co_msg_type_none
I have written following code in INIT method of View to Subscribe events but it is dumping with the Error "Action &OBJECT_ID& does not exist ".
DATA lv_ok     type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view   TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
register button events
    lo_view = wd_this->wd_get_api( ).
    lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
    wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
    lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
    wd_comp_controller->go_window->subscribe_to_button_event(
                   button            = if_wd_window=>co_button_ok
                   button_text       = lv_ok
                   action_name       = 'OK'
                   action_view       = lo_view
                   is_default_button = abap_true
    lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
               wd_comp_controller->go_window->subscribe_to_button_event(
                  button            = if_wd_window=>co_button_cancel
                  button_text       = lv_cancel
                  action_name       = 'CANCEL'
                  action_view       = lo_view
                  is_default_button = abap_true
How to solve this exception causing application to dump.
Thanks
Depesh

Hi Depeshn,
I have written following code in INIT method of View
I think you have writen code containg subscribe_to_button_event method in the INIT method of the pop up view. But actually you should write that code where you are generating the pop up window. i.e in the ONACTION method of the button (which when clicked generates the pop up window.)
It should be something like this:
" This whole code should come in the event handler of the button.
wd_comp_controller->go_window = lo_window_manager->create_window(
window_name = 'ZW_CERTIFICATION_POP'
title = lv_pop_title
close_in_any_case = abap_false
message_display_mode = if_wd_window=>co_msg_display_mode_selected
close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
DATA lv_ok type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
* register button events
lo_view = wd_this->wd_get_api( ).
lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = lv_ok
action_name = 'OK'
action_view = lo_view
is_default_button = abap_true
lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_cancel
button_text = lv_cancel
action_name = 'CANCEL'
action_view = lo_view
is_default_button = abap_true
I hope it helps.
Regards
Arjun

The requested column does not exist in this table

Hi All,
I am getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT "Customers - Dim".CITY FROM MVDEMO ORDER BY 1
When I tried viewing data online I am able to view the data in the physical Layer. Also I tried connecting thru ODBC Client and issued the same SQL (above) and it returns the data.
I am using Oralce BIEE 10.1.3.2.1 version.
Please let me know if any faced this kinda issue and how to resolve this.
Thank you.

Check your column mapping in the BMM layer in your Customers - Dim logical table. Does the CITY column point to a physical table column?

Error in ALV : Field Does not exists in Output table .

Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Entry SE01 1890 does not exists in T005G(Table)

Hi,
We are getting Bdoc error "Entry SE01 1890 does not exists in T005G(Table)" in CRM system.We are using CRM 7 and ECC 6.
Please help me in resolving this issue.
Thanks,
Rahul

Hi,
Thanks for the reply.
We are getting this error in BDOC monitoring.Similarly we haev more errors related to same error like" Entry SE01 1880 does not exists in T005G(Table)".
.Actually when i check this table city code 1880 is mentioned under region 18 in the country key SE.
Please help me

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

[nQSError: 59014] The requested column does not exist in this table.

Hi
As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
Thank you
mm58

I guess you have the column in RPD, and it is available for queries.
are you using any time measures? if so check you chronological keys.

Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

Table or view does not exist when using in PL/SQL block

I hav something strange...
When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
I create the function with the same user then when i'm executing the query.
For example:
select name,userid from portal.WWLOG_ACTIVITY_LOGS
if i execute this... it works fine. I get my results.
However when i create a function:
CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
as
/*CURSOR c_user_creator IS
select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;*/
v_creator varchar2(500);
v_ret_val VARCHAR2(500) := 'NOT_FOUND';
BEGIN
select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;
--v_ret_val := x.userid;
--end loop;
-- Is the user in the group or not?
/*OPEN c_user_creator;
FETCH c_user_creator INTO v_creator;
IF c_user_creator%FOUND THEN
v_ret_val := v_creator;
ELSE
v_ret_val := 'NOT FOUND';
END IF;
CLOSE c_user_creator;*/
Return v_ret_val;
END;
The table or view does not exist...
I tryed with cursor, select into, for x in (select....)
Nothing works.
A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

Are there different grant you should use so you can
select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

Table does not exist when creating FK Constraint across schemas

Hi all,
This will probably boil down to a permissions issue since I'm sketchy on the various levels....
I'm testing a conversion to Oracle from our legacy system. There are 4 schemas which I've created and each of those schema users have been granted DBA roles.
After creating a number of tables I wrote the SQL to create the FK Constraints. Most of them went in, but the ones crossing schemas don't. Logged in as SYS, I can do a select from each table, I can even JOIN the two in the SELECT. However when I try creating the constraint it give me a: ORA-00942: table or view does not exist
ALTER TABLE USERA.TABLEA ADD FOREIGN KEY (COLA) REFERENCES USERB.TABLEB (COLA) ON DELETE CASCADE
Again, I have scads of commands that went in correctly so this must be a permissions type thing. I'm the only one logged into the database since it's my own test system. This is 10g BTW.
If you have any suggestions as what to look into, please explain how to actually perform the checks since I'm still learning how to get around.
Thanks very much!

To bulk grant, you can use dynamic SQL; somthing like this:
<BR><BR>
SQL> declare
2    l_grantor VARCHAR2(30) := 'USERA';
3    l_grantee VARCHAR2(30) := 'USERB';
4 begin
5    for table_rec in (select owner,table_name from all_tables where OWNER=l_grantor) loop
6      execute immediate 'GRANT REFERENCES ON '||table_rec.OWNER||'.'||table_rec.TABLE_NAME||' TO '||l_grantee;
7    end loop;
8 end;
9 /

'table does not exist' when creating generic datasource

I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
then I selected each datasource under co-om-cca and activated those with no problems.
problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
Please help, thanks.

I have answered my own question. I wasn't entering the view/table and it was my own complete oversight.

ORA-01435: user does not exist when using imp utility

I installed Oracle 8.1.7.0.0 successfully on WINDOWS 2000 and created a database TEST using DBCA. Then I used a script to creat a tablespace and a user in TEST databse. I could use the imp utility to import the data (a dmp file) to the TEST database without any problem. But after I applied a patch to bring up the version to Oracle 8.1.7.4.1, I got the following error when I tried to use the imp utility again to import the data (a dmp file) to the TEST database.
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully
I checked that I created the same user test (as it is in dmp file I wanted to import) on TEST, and I could login to TEST using:
sqlplus test/test@TEST
The command I used is:
imp system/password@TEST file=test.dmp full=y log=importTEST.TEST.tmp
I also tried to use the following command:
imp system/password@TEST file=test.dmp fromuser=test touser=test log=importTEST.TEST.tmp
and got the same error as before.
Anyone has any clues what could go wrong? The only difference for me to import the data on TEST is that the
previous successful import was done in Oracle 8.1.7.0.0.
Is it possible that I missed something during the applying of the patch 8.1.7.4.1?
Thanks, and your help is greatly appreciated.
Jane

Ther is a set of instruction to be followed after installing the patch set 8.1.7.4.1 after running it thru OUI.They are as follows. Please complete these steps and u should not have problems any more.
When applying this patchset on Windows NT and Windows 2000, you must log onto the system as a user with Administrative privileges (e.g., as a user which is a member of the local Administrators group).
1.Disabling system triggers.
Before performing the next step, you must first set SYSTEMTRIG_ENABLED = FALSE in the initialization parameter file. To do this add the following line to your init<sid>.ora file and restart the database (see Note 149948.1 in Metalink for more information on this issue).
systemtrig_enabled=false
2.Invoke SQL*Plus (sqlplus), connect as internal and run the following:
select * from duc$ where PACK='JIS$INTERCEPTOR$' ;
If no rows were returned go to the next step. If a row was returned delete it using the following:
delete from duc$ where PACK='JIS$INTERCEPTOR$' ;
commit;
3.Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL scripts with event 10520 set. NOTE: This event is not intended for regular database operation and when turned on below by the 'ALTER SESSION' command will automatically be turned off by the subsequent 'CONNECT' command.
ALTER SESSION SET EVENTS '10520 TRACE NAME CONTEXT FOREVER, LEVEL 10';
?/rdbms/admin/catalog.sql
?/rdbms/admin/catproc.sql
?/rdbms/admin/catrep.sql (This only needs to be run if you are using symmetric/advanced replication. This is not necessary for sites using dblinks and read-only snapshots if symmetric/advanced replication is not installed)
CONNECT / AS SYSDBA;
update obj$ set status=5 where type#=29 and owner#!=0;
commit;
4.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install.
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following SQL DDL command(* Note:If Java has not previously been loaded into the database, skip this step).:
SQL> create or replace java system
2 /
(Note that the / (slash) is important to ensure the execution of the command).
To ensure the correct installation of the XDK in the database run the following 2 scripts (Bug 2115227):
$ORACLE_HOME/oracore/admin/initxml.sql
$ORACLE_HOME/rdbms/admin/catxsu.sql
* To determine whether Java has previously been loaded into the database:
invoke SQL*Plus (sqlplus), connect as internal and run the following:
SQL> select count(*) from all_objects where object_type like 'JAVA%';
Java is installed if you get a non zero result returned from the query.
5.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following scripts which are located in $ORACLE_HOME/javavm/install ( Note: If Java has not previously been loaded into the database, you can skip this step):
load_jis.sql
jisja.sql
initjsp.sql
jspja.sql
Notes:
When running the $ORACLE_HOME/javavm/install/jisja.sql script the following error may be reported and can be ignored:
call jis_exit_java_session(0)
ERROR at line 1:
ORA-29515: exit called from Java code with status 0
Bug 1459233 was filed against this problem which is fixed in 9i.
6.If you deleted a row from duc$ in step 8 then reinsert it again. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL:
insert into duc$ (OWNER, PACK, PROC, FIELD1, OPERATION#, SEQ) values ('SYS', 'JIS$INTERCEPTOR$', 'USER_DROPPED', 0, 1, 1);
commit;
7.Enabling system triggers.
You must either remove SYSTEMTRIG_ENABLED from the initialization parameter file or explicitly set it to TRUE before attempting any other patch set post-install steps. Restart the database.
8.This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL script:
?/rdbms/admin/utlrp.sql
9.Execute the following steps only if you have installed Oracle interMedia Text in the database you are attempting to modify:
If you have not previously unlocked the ctxsys account and supplied a password for that account, you need to do so. (If you have needed to use Oracle Text in any way prior to applying the patchset, you will have already performed this step, and you can skip this.) Do so by issuing the following statement:
ALTER USER ctxsys IDENTIFIED BY <passwd> ACCOUNT UNLOCK;
If you have already installed 8.1.7.2 or 8.1.7.3, go directly to step 7 below.
If you have already installed 8.1.7.1, go directly to step 5 below.
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801071.sql
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801072.sql
CONNECT / AS SYSDBA;
@?/ctx/admin/upgrade/s0801074.sql
CONNECT ctxsys/<passwd>
@?/ctx/admin/dr0pkh.sql
@?/ctx/admin/dr0plb.sql
@?/ctx/admin/dr0type.plb
@?/ctx/admin/dr0typec.plb
9.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the XSQL Servlet - see here for more detail. The patchset installation does not, however, modify any of the Oracle HTTP Server configuration files to reflect changes to the XSQL Servlet installation. If you have previously installed the Oracle HTTP Server, you will need to update one of the configuration files manually after the patchset installation is complete. If you do not do so, the XSQL Servlet may not work in the context of the Oracle HTTP Server after the patchset is installed. To update your Oracle HTTP Server configuration, perform the following steps:
1) Edit the file: $ORACLE_HOME/Apache/Jserv/conf/jserv.properties
2) Search for the string: "XSQLConfig.xml File location"
3) Modify the parameter wrapper.classpath on the line immediately following the above string to read: $ORACLE_HOME/oracore/admin
4) Save the file.
10.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the PL/SQL XML parser - see here for more detail. To load the new XML parser in to the database, run the following script as user SYS:
? /xdk/plsql/parser/bin/load.sql
11.If you are using the RMAN catalog then upgrade it as follows:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;
The post install actions are now complete and the database is now ready for use.

Field does not exists Error - INSTALLATION TABLE

We have applied ML MP9 on system database for our eRecruit Instance. We are getting a "Field does not exists" (for eg., INSTALLATION.GL) error for the components which refers to INSTALLATION table.
The error gets resolved if we introduce a .value in PeopleCode.
Note: Our Dev Instance is working fine which has ML MP9 applied on it.
Please find the PeopleBooks Comments for the .value Property:
Considerations Using INSTALLATION or OPTIONS Tables
When using the INSTALLATION or OPTIONS table, you cannot use the Value property. You must use the old style format, not the field object format. For example, the following code is invalid:
If %Page = Page.GP_RUN_TYPE And
INSTALLATION.TL.Value = "N" Then
&RS2.HideAllRows();
Thanks & Regards
Sudha

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Action &OBJECT_ID& does not exist - when Filtering Table

Similar Messages

Maybe you are looking for