HT5567 How can I upgrade my Ipads without download ios 6.0.1 to all my devices?! Can I do it trough my PC with iTunes?!

My internet is slow, but I would like to update all my ipads (around 10-12)... IOS 6,0,1 is over 500 megs... Is there any other way than download to all ipads individually?
Thanks for the answer in advance!

What iOS is currently installed?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Similar Messages

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I upgraded to a 4G today from a 3G... how can I get my phone to sync with Itunes now

    I purchased a new phone today... how can I get my 4G to sync with my Itunes so my music and apps will transfer onto it.  Do I restore my back-up or set-up as a new phone (these are the two choices I am given)?

    Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/HT2109

  • How do I upgrade my iPad 2 to iOS 6?

    How do I get the upgrade to iOS 6 on my iPad 2?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • How can i manually remove songs from Ipod with itunes 11?  Please Help

    I am trying to remove a single song from my kids Ipod 5th gen ipod with itunes 11.0.1.2. With older versions of itunes i was able to right click on the content that i wanted to remove and select delete.  I for the life of me can not figure out how to remove content with itunes 11.  i have a lot of apple devices , iphone,ipad,ipod touch, and so on and so on. I am so frusterated that i feel like thowing it all in the garbage and starting over with another product.   

    Everything works the same in iTunes 11 as in previous versions.

  • How can i make my ipod touch sync with itunes again?

    recently, my whenever i plugged in ipod touch to itunes on my desktop or laptop computer it does not sync nor shows that itunes has recognized it. How can i fix this?

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Hi, i downloaded songs, and they automatically got charged to my cc on file, i wanted to pay with an i tunes card,. How can I revert the charge and pay with itunes card?

    Hi,
    I dowloaded some songs, and I meant to pay with an I Tunes card (code)
    but my credit card on file was automatically charged.
    How can I reverse the charge?
    Thanks.

    Click here and ask the iTunes Store staff for assistance.
    (107256)

  • TS4062 How can I sync my iPhone 6 wirelessly with iTunes?

    I have been syncing my various iPhones with iTunes for many years. I know how to do it. However, my iPhone 6 will not sync wirelessly with iTunes. It will sync with USB. It sometimes, but rarely, will sync wirelessly if I shut down the iPhone and reboot it, but most often it won't even then.
    My iPad will sync wirelessly with iTunes when it is plugged in to AC power. The iPhone 6 won't.
    Both my iPhone and iPad are running IOS 8.1.1
    My Macbook Air is running Yosemite.
    I have tried the various fixes posted online, i.e. turning off handoff, turning it back on, etc., turning messages on and off, etc. There have been others posted; I have tried them all. Nothing works.
    Is anyone at Apple listening?
    Thanks
    Rex

    Actually it does not tell you how to sync the iPhone to Outlook for Mac!

  • How can I get iPhoto to share videos with iTunes automatically?

    When I take a video with my camera and upload to iphoto, is there any way that I can get the video to automatically copy into itunes? At the moment I have to open the video in quicktime and then 'share with itunes' for each individual video that i shoot.
    There must be a better way?

    iPhoto doesn't import anything unless you tell it to. All it's doing is offering to import. No you can't stop that window appearing. You'll just have to click cancel.
    iPhoto Menu -> Provide iPhoto Feedback
    is the route to the developers for feature requests.

  • How can I put music on my Ipod with Itunes 11.0

    I don't get how I am supposed to put music on my ipod with the new version of Itunes 11.0

    In itunes go to the "View" pull down menu and select "Show Sidebar" and you can then access your music and device the same way you used to be able to ~ just drag and drop to devices, or access your music list (by "songs" in the top centre and then by name/artist/album/etc! Yay

  • How can i connect my iphone 4 s with itunes? itune does not recognise the iphone when it is connected

    Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?

    For this issue you might try a couple things.
    First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
    If that doesn't work, you can remove and reinstall iTunes.
    http://support.apple.com/kb/HT1923
    This article will help with that process. Follow it exactly.

  • HT5278 Does your games and apps get wiped when you upgrade your iPad to the IOS 5.1.1

    Hi I would like to know that if you upgrade your IPAD 2 to IOS 5.1.1 will all the stuff you have on your IPAD get wiped

    For the sake of updating, it doesn't matter too much - but you can find it on the iPad through Settings -> About - Version. If your current version is 4.x or older, you'll have to do it through iTunes... but even if you have a newer version, if you want to be extra sure that you'll keep your data then do it through iTunes (http://support.apple.com/kb/HT4623) and make sure to let iTunes fully back-up your iPad before you start the update.

  • How do you unlock your ipad without a passcode if it wasnt setup through itunes

    How do you unlock your ipad without a passcode if it wasnt setup through itunes

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3, Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3

    Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3
    Please tell me if is possible

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • How to find my lost ipad without apple id in short time ?

    how to find my lost ipad without apple id ? i wanted to report but i got no serial number of it. i tried to find by using 'find my iphone 'app but it cant show me the place of my ipad ,i think the person has signed out my id. i have got some important info and photos in it . how to find the location of it in short time ?? thanks !

    This is what you can do:
    Reporting a lost or stolen Apple product
    If the thief was able to turn off Find My iPhone, then your password must have been easily guessable (or the thief knows you) and you will not be able to find your iPhone.  Otherwise, click the "Find My iPhone Overview" from the above article for more information.

Maybe you are looking for

  • I can no longer click to have my scroll options appear for scrolling.. there is no top or bottom option anymore.. help!

    when i was using internet explorer i was able to click on the scroll bar and move from top to bottom of page and other things.. there is no longer this option with foxfire.. i must now click individually to move!! what a pain.. please help me..

  • OADefaultListBean to display all the values

    Hello, Using OADefaultListBean, i was able to display all the selected values using the below logic but how to get list of all the values in the OADefaultListBean instead of just the selected ones? OADefaultListBean list = (OADefaultListBean)webBean.

  • Why is OracleObjectMappingAttribute needed? Can I do without it?

    I wrote my own class to map from an Oracle UDT to my own .NET object. It implements IOracleCustomType and so includes the FromCustomObject & ToCustomObject methods. I just wanted my class to map directly to my business objects, so that is what these

  • Can't open any program (cc o cs6)

    Hi, a few days ago I tried to open my encore cs6 and received a message asking for a serial number. I thought it was a internet error or something minor. But I'm still getting the same message and now when I try to open any (premiere, photoshop, etc)

  • Exchange 2013 Get-ServerHealth NotApplicable

    Hi All, I have a new installation of Exchange 2013. SCOM monitoring in place. I'v noticed that a lot of errors showing on SCOM regarding the HealtSet is showing unhealthy. But what is strange to me is that when I run Get-ServerHealth I see that the H