HT5622 Apple ID profile update does not allow changing area or country codes

Is there any way to do this?  Or to report the problem to a webmaster?  (I presume the country code for US is 1.)
It will only accept putting the are code in the country code box and leaving area code box empty.  Any other change attempt just produces "Please specify a vaild phone number."

Solved with assistance from iTunes support.  The main problem was that you cannot use an e-mail address which is associated with your existing account.  So the answer is to set set up a new e-mail address with your Internet Service provider.  Next step is to log into iTunes using your existing appleID (which in my case was a non e-mail address as mentioned in my question) and then modify your itunes id and e-mail account, both to the new e-mail address.  I tried it and it worked.  All downloaded history such as itunes music and apps that I have downloaded onto my devices over time has been retained.  Furthermore I can now use the "Find my iPhone app" to find both my iphone and iPad.  Likewise will be able to use this revised appleid to access iCloud once available and synch my apps etc.,  Very pleased with iTunes Support's prompt response and remedy.

Similar Messages

  • My iPhone has the correct Apple ID for everything BUT iCloud.  How do I change that.  Going through Settings shows the incorrect ID but it does not allow change.

    My iPhone has the correct Apple ID for everything BUT iCloud.  How do I change that.  Going through Settings shows the incorrect ID but it does not allow change.

    Settings > iCloud > delete account
    You want to keep all content on your iPhone
    Resign back in

  • Your profile option does not allow automatic numbering error when trying to load BSA

    We are getting this error while trying to load BSAs. The profile option is set to always at the responsibility level,
    The same code and settings were tested in lower instances and it went through fine
    Document sequence is set correctly.
    Any inputs to resolve this issue would be greatly appreciated. It has stopped out production Data conversi
    Thanks
    R

    Hi Winsky,
    Ensure Profile: Sequential Numbering must be set to: 'Partially Used' at app level
    Refer the following note and check whether it helps:
    I Get The Error: Your Profile Option Does Not Allow Automatic Numbering. [ID 560388.1]
    In Order Import stuck record with error "Your Profile Option Does Not Allow Automatic Numbering" [ID 1083645.1]
    Best Regards,

  • I have made many apple id and now does not allow me to go back in and fix it to another nor with self poth Ben had. Can you help me too please

    I have made many apple id and now does not allow me to go again and build another storming nor with what I had. Can you help metoo please

    Gonda...
    Not just a language issue...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Field VBUND does not allow changes to the document ?

    If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
    I can't change trading partner.
    Thanks!!
    Message was edited by: Rico Wang

    Rico,
    Using trn code SM30, modify table V_TBAER and insert the entry
    BSEG-VBUND for account type S, D, K, A
    and see the effect.
    Thanks
    Mohit
    ps: you may want to check OSS notes as well.

  • System setting does not allow changes to be made to object LSYS

    Hi
    Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
    Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
    System setting does not allow changes to be made to object LSYS
    Why it is saying like that . But i can able to include the other process types in the process chain .
    regards
    mohammed

    Dear Mohammed,
    Since you are trying to create process chain in production system.
    Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
    Check the settings in SE06. system would be non-modifiable for sure.
    in SCC4,  settings ->"changes to the cross customizing objects would be not allowed"
    These two settings/configurations would not allow any development or changes or edit or create in production.
    Please check with your basis folks and proceed further.
    Hope this would help you more in understanding

  • System settings does not allow changes to be made to object

    Hi,
              In one of my test system, when i tried to change the object  its displaying following error message.
    System settings does not allow changes to made to the object.
    I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
      I would like to know, how to change the object in the namespace.
    Regards
    Srikanth

    Hi,
    In SE06, in addtion to system status and component status, check the namespace status too.
    It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
    To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
    Regards,
    Srikishan

  • System setting does not allow changes to be made to object

    Hi experts,
      I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
    "System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

    Hi,
    If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
    Or you  can find the text in the note:
    «/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
    Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
    Regards,
    André Nunes

  • System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

    hi,
    Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
    assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
    gives the following error:
    System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
    Our support packages are as following:
    SAP_BASIS       640                   0009
    SAP_ABA         640                   0009
    ST-PI           2005_1_640            0000
    PI_BASIS        2004_1_640            0006
    SAP_BW          350                   0009
    BI_CONT         353                   0000
    Could you please suggest or help us in resolving the issue ?
    thanks and regards,
    Yogesh

    Hello,
    the above mentioned note is too old. Please check note 781371.
    Please also check in transaction SM30 view V_TRNSPACE
    the record for /1SEM/:
    Namespace:     /1SEM/
    Namespace role C
    Repair License
    SSCR Popup     X
    SAP Standard   X
    Gen Objs Only  X
    Regards,
    Gregor

  • The adobe version 10 update does not allow use of tabs

    I had tabs working ok on my laptop, then an adobe update to ver 10 has stopped the tabs feature working. I get all sorts of notices about this being embarrissing to Firefox and analysing the problem. But nothing is offered. Everything locks up when I try to open tabs. Seems trawling q and a that this is not a prob unique to me. Do Firefox actually moniter this feedback and offer some hope of resolution?

    Jeaninefromca wrote:
    Apple does not allow use of Adobe Flash with the IPad. Is it all right to use Bridgebaseonline with a Mac that is synched with an IPad?
    Flash is not available for the iPad.  If Bridge Base Online requires Flash, there's nothing you can do on the iPad, unless Bridge Base Online has an app in the iTunes App Store.
    You may want to try an alternate browser like Skyfire or Puffin.  No guarantees.
    I have not been able to synch Ical and Iphoto with my IPad.  I've been to the Genius bar 5 times and on the phone twice to try to resolve this problem.
    iBook, Mac OS X (10.5.2), I cannot synch my IPad with IBook
    This is a separate issue than what you stated in the subject.  Syncing recent iPhones and iPads that have iOS5 on them require iTunes 10.5, which also requires OSX 10.5.8 on your Mac.  Your profile says you have 10.5.2.  If that is correct, you need to update to 10.5.8, then update iTunes to 10.5, if you haven't already done so.

  • How do I install a SSD drive - the Bios does not allow changing to AHCI mode

    I have a Windows 7, HP ENVY approx 1.5 years old.  I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
    How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?

    Hi:
    AHCI is enabled by default on today's HP consumer notebooks.
    Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
    Paul

  • Is it true that apple i phone 5 does not allow third party tethering ie connection to my mercedes benz comand online system

    .

    I'm having the same issue with a Porsche Cayenne at work.
    I have 5 devices paired with it, 2 iPhones of unknown type and OS, an iPhone 5 running the latest iOS, a Samsung Galaxy S II running ICS and a Blackberry 9700. The SGS2 is mine, the iPhone 5 belongs to my boss, the BB 9700 is his boss's phone and the unknown iPhones belong to our customer and his wife who test drove the car and now want to buy it complete with the Online Services function with syncs Emails and SMS. It falls to me to get this working.
    In the Device Details option of the Porsche PCM bluetooth menu it lists the bluetooth profile that are active.
    The BB 9700 lists AVRCP, A2DP, HFP, SIM-Acess and DUN. The BB syncs email and SMS.
    The SGS2 lists AVRCP, A2DP. HFP and SIM-Acess. The SGS2 sync SMS but no email.
    All 3 iPhones list AVRCP, A2DP and HFP. No Emails or SMS syncing.
    iPhone supports MAP (Messaging Access Profile) since iOS 6.0 but not SIM-Acess profile.
    I understand that syncing SMS and Email only works when pairing is initiated from the car, not the phone. Pairing initiated from the phone gives priority to HFP (Handsfree Profile) which locks out syncing messages.
    I also understand that repeated pairng improves the connection, though I haven't had time to test this extensively.
    Does anyone know if the Porsche PCM supports PAN and MAP with iOS 6.0?
    TIA

  • The new update does not allow me to start a new tab in the browser

    After updating Firefox for Mac, Command-T, the prompt in the File menu, nor the + by the open tab will start a new tab.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Flash player update does not allow me to use Kuler

    Why can't I use kuler with flash player 10.3.183.43?  This is the latest Flash Player I can install.  Is there a way around it?  I use Kuler all the time, and now I can't because of this problem! Please help! 
    Thanks!

    Hi Janieminman,
    What browser are you using? and version of the browser? Also are you on a Windows or Mac computer?
    -Dave

  • HT204053 How do I have my  wife's iphone 4s upload pics to the same icloud used for my ipad and iphone?  Phone does not allow changing icloud ID once established.

    How do I have my wife's iphone 4s upload pics to the same icloud I use for with my 4s and ipad?  Can seem to change her icloud ID to match mine.

    I can tell you how to do this but first wanted to be sure that's what you want to do.  You would then be sharing the same iCloud account and any synced data (contacts, calendars, etc.) would then be merged and the merge data would appear on her phone and your iPad (i.e., you'll end up with each other's contacts on your phone). You would also both be backing up your devices to the same account, sharing the 5GB of free storage (assuming you're both backing up to iCloud).
    There's an alternative setup that would allow her to set up your iCloud account on her phone as her primary account and just turn on photo stream in that account (allowing your to share you photo stream), then set up a secondary iCloud account on her phone that would sync her Mail, Notes, Contacts, Calendars and Reminders.  She would still have to back up her phone to your account, as well as syncing Safari, Documents and Find My iPhone (all of which can only be done in the primary account).  Also, her mail would be fetch, not push as push email is only supported in the primary account.
    I suppose a third option is to leave things as they are and share you photos with each other using shared photo streams.
    Let me know what you want to do and I'll give you the steps.

Maybe you are looking for

  • MBP + Mini DisplayPort to Dual-Link DVI Adapter + 30" = blue flickering

    Hi everyone, I was wondering if anyone has found a solution to this problem? I use an Apple 30" Cinema Display and it worked fine with my Late 2007 MBP. Now I got a new Core i7 MBP and the Mini DisplayPort to Dual-Link DVI Adapter. At first all works

  • Sprint Won't Take My Money

    They won't take it!  I'll be headed to purchase an iPhone tomorrow, not because it's the phone I want, but because it's the only phone I can get. Here's the situation: I'm a young guy, and I've been using a phone on my parents family plan for years.

  • WIFI WPA-EAP won't connect as EAP method only shows SIM, how can I make it show more?

    Trying to connect to a wifi connection which uses WPA-EAP security, with a username and password system (at work and I cannot change these settings). My Android device connects with no issues, but my ZTE open C on Firefox OS will not... Looking into

  • Displaying images in iPhone Mail

    I see this question asked over the years, but not recently. I can't tell if the omission on Apple's part has been fixed. I have my phone set to not automatically download images in Mail (for many reasons). But I would like to see the images every onc

  • Student Self Service - COS Approval Workflow

    Hi, I have copied the COS Workflow - 29800009 to a custom one and activated the Event Linkage. Now from portal i have executed the COS WDA -  PIQ_ST_COS. The event is triggered and i can see the workflow log from SWI1. But i cant find any data in the