HT5624 when I turn my iMassage on it will go to activation mode  for along time and then fails Whats teh problem ?!!

when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

Similar Messages

  • I have Lightroom 6 (not CC) on a Windows machine.  I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

    I have Lightroom 6 (not CC) on a Windows machine.  I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN!  And then to further add insult to injury, I'm prompted to enter in the license number of my product.  I've gone through this process a dozen times now...SCREAM!!!

    Paulou12 what type of a Creative Cloud Membership do you have?  You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
    Finally if you are in a managed environment then please work with your I.T. department to apply the update.

  • On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezinginsending

    On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends

    See:
    iOS: Troubleshooting Messages
    However, I suspect it is just a tempery network problem beyond your control

  • I rented the movie "Green Hornet". It was downloaded but when i try to play it black screen shows up for some time and then I'm the home screen.

    I rented the movie "Green Hornet". It was downloaded but when i try to play it black screen shows up for some time and then I'm the home screen.

    Hi runner_girl7585,
    Thanks for using Apple Support Communities.  If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • HT3371 When I plug in the computer to charge, the light is green for a minute and then turns red and the plug gets very hot.  It's not the plug as it works on other computer.  Why won't my computer charge?

    When I plug in my MacBook Pro to charge, the light is green for a minute and then it turns red and the plug gets very hot.  The plug works fine on another computer and charges it.  Why won't my MacBook Pro charge?

    You performed all of the steps outlined in this link?
    http://support.apple.com/kb/TS1567
    You uninstalled and reinstalled iTunes?
    GB

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • When I try to download within a site, the downloaded site flashes for a second and then reverts to a page reuesting me to sign in again. After doing this, the above process is repeated.

    Running Windows XP. This does not happen when I use Internet Explorer.

    Thank you for the information and the response. We will be upgrading to the full version of Creative Cloud to publish our single .folio.
    I do want to remark on the issues created by Adobe's inconsistent explanation of how DPS can be used with the Creative Cloud. After reading that FAQ, I also spoke with an "Adobe Agent" through the chat system that pops up on various product pages and asked the agent as specifically as I could if the Single-app version of Creative Cloud would allow me to publish single .folios through DPS. In no uncertain terms the agent said the Single-app version would be fine, and referred me to the order page to begin the order process.
    I spoke with another agent over chat in the morning on Saturday and they also said I should be able to publish single .folios with the Singe-app subscription to Creative Cloud. When I presented my App Activation problem to the agent, the agent said I should just wait 24-48 hours for my subscription to Creative Cloud to process so I could create my app.
    This has been a very vexing process that has cost my team valuable app review time. If I had not encountered the FAQ and two agents who specifically told me that I could use the Single-app version of Creative Cloud to publish my .folio, I would have been happy to go straight to purchasing the full version of Creative Cloud.
    Thanks again for the assistance.

  • HT1688 my Iphone 4 quit working.  It will not recharge and it was not low on charge when it quit.  It was sitting on a table. I checked the time and then it never worked again.

    My Iphone 4 quit.  it has a charge.  it was on a table.  i checked the time and it never came on again.
    Please help.
    Sharon

    Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If it hasn't appeared after 20 seconds of holding charge it for 15 minutes with the wall charger and try again.

  • When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

    When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time.  How do you turn this off?

    Your phone might be on Zoom somehow, try just the simple "gestures" fix
    Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
    From there you should be able to access Settings>General>Accessibility>Zoom>OFF
    Hope this helps

  • Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

    Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

    Hi r,
    Make sure you close iTunes before shutdown.  And you're quite welcome.

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • When i plug my Ipod touch 4th generation in it goes to the apple screen and then it will turn off and then back on to a solid blue screen.

    When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4623 I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    You can try to restore it via recovery mode as show in the link below:
    http://support.apple.com/kb/ht1808

  • When i turn in my computer it only come a white screen whit a map and a questionmark?

    When i turn in my computer it only come a white screen whit a map and a questionmark?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

    my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

    Did you restore to factory defaults/new iPod and sync stuff to your iPod?  If you restore from backup there may be some corruption that is now in the backup.

Maybe you are looking for

  • Missing all images in help for Oracle BC Browser

    It is no images in Oracle Business Component Browser help topic.

  • ODI 11.1.1.6.4 - Interface failed at SnpsSqlUnload - Unload source data Step

    Hi Experts - We are getting error during interface execution in ODI 11.1.1.6.4. We are unable to find the root cause. Interface is using customized LKM (LKM SQL to Oracle (SQL*Loader). This LKM is basically connecting to SQLSERVER fetching required r

  • Cmd-sced question with flow permanent

    View the following and tell me if all this does is clears the memory at the times specified in the command. This is a snippit from the Microsoft LCS load-balancing document I got my hands on. flow permanent port1 5060 flow permanent port2 5061 cmd-sc

  • 11g Cached function feature alternative in 10g ?

    All: I want to know if there is a feature or alternative that i could implement the 11g cached function sort of thing where i could share the data via passed parameters by reference of a cached object across sessions. Thanks Srinivas

  • Close button for Exe

    Ok, there are scads of posts about Close button for a swf file being problematic because of the browser being used. Is it possible to get a close button to work for an exe? The button in the playbar works, but not a button I have created. If not I'll