I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m
I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!
Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.
Similar Messages
-
My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?
Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way. -
when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!
Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268
-
this is really annoying me now i can't download any app updates or do anything to do with my apple id.
Same problem - did you get this resolved?
-
There was a problem downloading the software for theIpod. An unknown error occurred (9006)
Make sure your network settings are correct and your networkconnection is active, or try again later.
This was the last error message.Try disabling a/v software and turning off the Firewall.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then try to update. -
When I restart my computer, preferences are reset?
When I restart my computer after updates/etc., my dock is reset to include default apps, while removing custom folders/apps or "forgetting" (shown as "?") the location of certain apps. This happens regardless of whether I accept or deny a keychain-looking request on boot, pre-login that asks for admin confirmation to "modify" settings or so. This is annoying because i have to drag all unwanted apps off of the dock. It also resets all the desktop size/grid/alignment settings.
My harddrive was replaced by a certified Apple Technician and is now a solid state drive. The computer finds the startup disk "f", which shows up under the harddrive in disk utility. OSX.8.1, 4GB RAM, these updates on a mid-2009 13" Macbook.
Side note,
Microsoft Word also seems to be negatively affected by OSX.8. Autosave doesn't appear to work? It consistantIy tells me that autosave or autorecovery have failed. I have the latest MS Office and have google to try and solve--some files are suddenly "read only", and older .doc files cannot be opened. I have old reference data and passwords in some of these files! Losing them is not ok.I tried the disk verify/repair, but the same problems persist. Also ran all available udpates.
The warning dialogue/password prompt at boot asks to "modify network configuration". It seems unnecessary for it to always come up? Probably not related to the desktop/dock issues but confusing too. -
Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?
Using an iPhone without a wireless service plan
-
I rest my Ipod with ather computer and then when I would like to use that with my computer it tell me the password it's not correct. can you Help
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
i went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help i whont my ipod touch back
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
Hi, i had backed up my data and then when i restored my phone with the restore backup option, all the photos, music where there but no apps. Al my apps are disappeared. Can you please tell me where are my apps backed up?
Apps (like other synced media like music) are not included in the backup that iTunes makes. Thus, restoring from backup if the apps are not in the iTunes library there are no apps to restore to the iPod.
Redownload the apps into your iTunes library.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
And then restore from backup.
Make sure that in iTunes>Preferences>Devices the box that say "Prevent iPods..." is checked otherwise when you connect the iPod to the computer the previous backup (with your app data) might be overwritten. -
I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?
Apple ID FAQ http://support.apple.com/kb/HE37
-
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.
Maybe you are looking for
-
Wireless printing in a non-internet enviroment
I recently purchased a HP Laserjet Pro P1102w, because I need to print in a location that doesn't have wireless, but does have cellular (and thus I get internet through a tethered cell phone). The printer easily went onto cloudless printing at my hom
-
My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button. Because of this it makes it tough to put my phone on speaker or type in my v-mail password.
-
Address book in piserverdb tree
Hello if my knowledge is correct, the address book is stored in the o=piservdb tree in the Directory server. but how is that data stored? because when I export an ldif of o=piservdb tree and i look for a certain user which i know has nearly 2000 cont
-
Hi , I have added 2 buttons in one table column using layout. if the bindproperty for that column is "Approved" than that buttons set to false, if the bindproperty is "Pending" than buttons get visible. i am trying this code, but it is not go
-
I Purchased the update for Mac OSX Moutain Lion from Mac App Store. After several attempts to resume downloads. an message appeared as follow in red "An error has occured" The grey button next to it has no text in it and also does not respond when cl