HT5858 Problem with control center

When I swipe up from the bottom of my screen, the control center almost never comes up! What's going on?

Do you have a bulky case with an edge near the bottom of the screen?
Lots of people describe this problem with Otterbox Defender case.
https://discussions.apple.com/message/23015788
Sounds like maybe Apple just needs to make the CC swipe button a little bigger.

Similar Messages

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Problem with controlling Annotations from Excel VBA

Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End Sub

Make sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740

I can't turn off wifi with Control Center

I can't turn off wifi with Control Center after updated ios 7.0.6

It's running
I already checked dmesg and nothing happens. It works with Vista, so...
With my old laptop (it's the same model) brightness didn't work, and now this. I guess i'll wait for a new update

Problems accessing control center

After coloning the repository user from production back to development I have some problems getting control center to work again. At first I strugled getting start_service to work, however i got doing the following after a reastart:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/start_service.sql
Available
PL/SQL-prosedyren ble fullført.
However it still does not work, and show_service give me:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/show_service.sql
Not Available
PL/SQL-prosedyren ble fullført.
Any sugestions?

DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/service_doctor.sql
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL-prosedyren ble fullført.

Problems with webcam center

Hi
I bought webcam instant yesterday,i downloaded the newest drivers for it...
But it doesn't work.
Everytime i start webcam center the camera turns off...
I tried it with msn messenger...but it worked perfectly...
HELP!!!!

...the version is .0.02.0729
just try google.....
but i'm still searching for the solution of the problem with webcam center!!!!

Annoying bug with Control Center

hello guys
i have this really annoying bug with control center
when you open, for example sms app, the keyboard shows, and you want to pull CC up.
just do it slowly and you'll see how your finger is typing smth like " bgt", ios for some reason isn't blocking keyboard when i'm trying to use control center
when you'll it fast, there is 100% chance to type space or one extra letter
i think people can accept such kind of bug on galaxy phones, but not on iphone.
is there something that i can do to fix this?

Keyboard clicks don't register unless you lift your finger when it's on a key; while the fact that you are dragging your fingers over the letters when swiping up for Control Center causes keyboard keys to be pressed is certainly annoying and admittedly kind of dumb, it shouldn't result in any letters getting actually typed. I just tried this myself, and although I do manage to "hit" a key on each row of the keyboard, they keys themselves never register with the Messaging app because my finger doesn't lift until the end of the swipe to bring Control Center up.
Drew

Crm- Contracts problem with profit center!

HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
Contract Scenario,
I am Creating Contract In CRM and replicating it as a contract in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating to ECC with Internal order as a real account assignment object on the contract , when we are billing / revenue recog the dummy profit center is getting populated inthe accounting entries , the senario is explained as below
I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real internal order(IO1),as i am using single object controlling and controlling senario at the transaction level) to all the line items ,when ever the line item is Billed(Vf01) or the Revenue recognized on the Contract(Vf44) the Accounting Entries are getting populated with Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
I there a way we change the profit center on the accounting document on billing and revenue recognition
Goods receipt:
I am Creating Contract In CRM and line item in the contract which is backlined with the princial will generate a PR in ECC with Account assignment cat "F" When ever a Po with u201CFu201D account assignment is created and GR is done on the Same , Dummy profit center is getting populated in the Accounting entries
I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to the line item
We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
I require your help very badly , Please guide me .
Thanks

Hi,
Did you try using substitution rules for CRm processes ?

Problem with control IDs

I have two different panels in my program with various controls. The .h file
created by Labwindows for my .uir is partially reproduced below:
#include
#ifdef __cplusplus
extern "C" {
#endif
/* Panels and Controls: */
#define PANEL 1
#define PANEL_DATE 2
#define PANEL_FILE 3
#define PANEL_EWTR 4
#define PANEL_PROCESS 5
#define PANEL_CONVERT 6
#define PANEL_DONE 7
#define PANEL_PRINT 8
#define PANEL_SAVE 9
#define PANEL_TEXTBOX 10
#define PANEL_TEMP 11
#define PANEL_RH 12
#define PANEL_ATM 13
#define PANEL_MARKER_FREQ 14
#define PANEL_MARKER_DB 15
#define PANEL_MARKER_MIN 16
#define PANEL_MARKER_MAX 17
#define PANEL_MARKER_RIGHT 18
#define PANEL_MARKER_LEFT 19
#define PANEL_GRAPH 20
#define PANEL_SCALE 21
#define PANEL_MARKER 22
#define PANEL_TEXTMSG_3 23
#define PANEL_TEXTMSG_4 24
#define PANEL_TEXTMSG_2 25
#define PANEL_TEXTMSG 26
#define PANEL_2 2
#define PANEL_2_GRAPH 2
#define PANEL_2_N_5 3
#define PANEL_2_N_4 4
#define PANEL_2_N_3 5
#define PANEL_2_N_2 6
#define PANEL_2_N_1 7
#define PANEL_2_LED_5 8
#define PANEL_2_LED_4 9
#define PANEL_2_LED_3 10
#define PANEL_2_LED_2 11
#define PANEL_2_LED_1 12
#define PANEL_2_DONE 13
#define PANEL_2_MARKER_FREQ 14
#define PANEL_2_MARKER_DB 15
#define PANEL_2_MARKER_MIN 16
#define PANEL_2_MARKER_MAX 17
#define PANEL_2_MARKER_RIGHT 18
#define PANEL_2_MARKER_LEFT 19
#define PANEL_2_PRINT 20
#define PANEL_2_BUTTON_5 21
#define PANEL_2_BUTTON_4 22
#define PANEL_2_BUTTON_3 23
#define PANEL_2_BUTTON_2 24
#define PANEL_2_BUTTON_1 25
#define PANEL_2_CURRENT 26
#define PANEL_2_TEXTMSG_2 27
#define PANEL_2_TEXTMSG_3 28
#define PANEL_2_TEXTMSG_4 29
#define PANEL_2_TEXTMSG 30
#define PANEL_2_MARKER 31
The problem is that Labwindows has assigned the same control ID to controls
in the two panels, for example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have
the same ID, i.e. 16. If I try to use both of these controls in the same
"case" statment, I get an error "Duplicate case label '16'." If I try to
modify the .h file manually, and change the ID for PANEL_2_MARKER_MIN to
216, there is no error and the program executes but it no longer recognizes
mouse clicks on the PANEL_2_MARKER_MIN control.
Is there some way to fix this problem? Is there a way to force Labwindows
to assign different IDs for all controls, regardless of what panel they are
in?
Thank you for your help in advance.

"...The problem is that Labwindows has assigned the same control ID to
controls
in the two panels, for example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have
the same ID, i.e. 16. If I try to use both of these controls in the same
"case" statment, I get an error "Duplicate case label '16'." ..."
UIR editor counts controls inside the single panel they are in. In your
example, PANEL_MARKER_MIN and PANEL_2_MARKER_MIN have the same ID 'cause
both are the 16th control in their panel, rare case but it happens...
There is no way to force UIR editor to assign specific IDs to controls,
unless you add in one panel decoration controls or text messages and put
them before the other control in 'panel order' (ctrl+t in the editor): with
that trick you put in one panel all controls star
ting with order 0 (that is,
with control ID starting from 1 in the .h file), while in the second you
have non-operative contrls with lower IDs and operative controls or
indicator with higher IDs. This is NOT a polite solution since it relies on
the number of controls in the panels: every time you add new controls to a
panel, you should manage how IDs are assigned to them in order to avoid this
problem...
The best solution is to have two nested cases in your code, first one to
manage different panels, second one to manage different controls:
switch (panel) {
case PANEL:
switch (control) {
case PANEL_MARKER_MIN:
break;
// other controls of PANEL must be put here
break;
case PANEL_2:
switch (control) {
case PANEL_2_MARKER_MIN:
break;
// Other controls of PANEL_2 here
break;
That way you avoid any possible confusion and control mismatching that can
c
ause bizarre beaviour to your progrma.
Hope that helps
Roberto

HT5858 In the control center I can change the mute or the rotation but not both. How do I fix this. In settings I can not uncheck both the mute and rotation lock.

In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
 Cheers, Tom

IOS 7.0.2 update issue with Control Center

After updating, the iTunes controls no longer work in Control Center. I've already tried rebooting with no changes. Anyone else having this issue?

Ok, well, after a few more reboots and it finaly started to respond. Wierd.

MSI 180 - Problems with Media center III

Hey,
I have a problem with the Media Center III. When I want to watch TV I have to make a automatic scan in both Cable and Antenna. It seems that nearly all of my channels are found under the Antenna scan (strange I have Cable).
Well my problem is that eventhough I set the TV source to Antenna every time the Media center III software have been shut down I have to go into TV -> settings -> change the TV source from Antenna to Cable and back to Antenna to get the channels.
Anyone had the same problem.
Please help, how do I get the software to remember the settings......
best regards
K. Brinkmann


Some of the Jet and MDAC files of your operating system may be corrupted. Use a MDAC repair tool from
http://www.macropool.com/en/download/mdac.html
The above tool has fixed the problem of MediaSource's corrupted database problem for many users. You may want to try it.

ABAP Objects: Problems with controls in splitter container

Hi community,
I have problems with the second control in a splitter container.
In the left container I build up a list tree.
On double click on a node a column tree in the right container is created.
This is working fine.
But if I double click on another node in the left container the right tree remains unchanged.
What do I have to do to update/refresh the tree in the right splitter container.
Thanks in advance.
Regards
Ferdi

Thanks for your reply Thomas and Serdar,
I now destroy the right container and the right tree control if it exists after the event 'double_click' on a node in the left tree.
The result is now that the container is created (I can see it on screen) but no tree is shown.
If I just destroy the tree control but not the container the tree from the first double click on the left tree is shown.
In the debugger I see that the list tree instance is linked to the caontainer (after first and second creation of tree control)
Maybe you can see in the coding below what's wrong or missing.
Coding after EVENT DOUBLE_CLICK in left Tree: <pre>
destroy old tree instance and container
if not g_container_2 is initial.
 call method g_container_2->free.
 clear: g_container_2, g_tree_2.
endif.
create right container
call method g_splitter->get_container
 exporting row = 1
 column = 2
 receiving container = g_container_2.
setup the hierarchy header
hierarchy_header-heading = 'Hierarchy Header'.
hierarchy_header-width = 37.
create a column tree model instance
create object g_tree_2
 exporting
 node_selection_mode = cl_column_tree_model=>node_sel_mode_single
 item_selection = 'X'
 hierarchy_column_name = 'C1'
 hierarchy_header = hierarchy_header.
create tree control
call method g_tree_2->create_tree_control
 exporting
 parent = g_container_2.
perform add_columns.
perform define_events.
set registered events
call method g_tree_2->set_registered_events
 exporting
 events = events.
perform get_data.
perform add_nodes_2.
expand the root node
call method g_tree_2->expand_node
 exporting
 node_key = 'Root'
 level_count = 3.
</pre>
Regards
Ferdi
Message was edited by: Ferdi Meyer

Problem with Profit Center

Hello all,
I have a problem with changing the profit center in material master record. I have changed the profit center in material master record and saved the MMR. Then I posted a goods receipt document for this material. When I displayed the GR document, I found that the system is still taking the old profit center. Its not taking the new profit center which I updated in MMR. Kindly advise me whether I need to change the Profit center at any other place also???
Thanks in advance.
Regards,
Umakanth.

Hi,
Is your PO raised before changing Profit center in MMR.
After changing Profit center, raise new PO and check with GR.
Regards,
Suresh

Deploy data ware house with control center

Hi,
I am a rookie in data ware housing and in ETL process. I have sucsessfully deployed our sequneces, tables and dymensions. As next step we would like to deploy our mappings. The deployment was finished with errors:
At the first 'bigger' mapping we received the following error message:
RPE-01012: PL/SQL-Mappings can not be provided in this target schema. The traget schema and control center has to be in the same instance.
The role OWB_USER must be granted to the target schema. Use the OWB security interface to convert the target schema to OWB-user.
At the second 'simplier' mepping we got the following warning message:
ORA-06550: PACKAGE BODY, line 0, column 0: PL/SQL: Compilation unit analysis terminated
ORA-06550: PACKAGE BODY, line 1, column 15:
PLS-00304: Body of 'PRODUCT_MAP' is without specification complied.
ORA-06550: PACKAGE BODY, line 1, column 15:
PLS-00905: Object DWH.PRODUCT_MAP is invalid.
ORA-06550: PACKAGE, line 171, column 1:
PL/SQL: Declaration ignored
ORA-06550: PACKAGE, line 171, column 24:
PLS-00201: Bezeichner 'OWBSYS.WB_RT_MAPAUDIT' must be declared.
Anyone solved something similar?
Thank you!
Regards, Robert

The issue is not relevant any more.

HT5858 Problem with control center

Similar Messages

Maybe you are looking for