I can't turn off wifi with Control Center

I can't turn off wifi with Control Center after updated ios 7.0.6

It's running
I already checked dmesg and nothing happens. It works with Vista, so...
With my old laptop (it's the same model) brightness didn't work, and now this. I guess i'll wait for a new update

Similar Messages

Can't turn on Wifi with my unibody 2008 macbook

can't turn on Wifi with my unibody 2008 macbook after install the yosemite
i need to use lan connection

i phone to apple genius, she help me solved the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
In some situations, you may need to reset your computer's System Management Controller (SMC). Learn how to identify these conditions and to reset the SMC.
Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue. However, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple menu from the upper-left menu bar and then choosing Shut Down.
If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications.For Mac portables experiencing issues related to the MagSafe power adapter and/or battery, try:
Unplug the MagSafe power adapter from the Mac and the wall power socket for several seconds.
Shutdown the Mac. Physically remove and re-insert the battery (if it's removable) and startup the Mac.
If the issue is still not resolved after following the troubleshooting items above, an SMC reset may be necessary.

BT Router turns off wifi with radio app

Hi everyone. I have had BT broadband for a year with no problems. In the last two weeks when I try to listen to TuneIn radio app any Apple device, the wifi router immediately turns off. Wifi works perfectly for all other apps and stays connected when computers, iPads, iTouches, iPhones are in use. I can't work out what has suddenly happened for internet radio to cut out the wifi immediately I press the play arrow. Any thoughts would be gratefully appreciated. THANK YOU.

If you have done a full factory reset, then things would be back to where they were when you first got the home hub.
Its not likely to be a broadband issue, but its possible that TuneIn radio is overloading the wireless network somehow.
Its worth trying these thing first.
Try giving the 2.4Ghz and 5Ghz frequencies different SSids (names). Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...
Also make sure that you have "smart set up" turned off. See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can't turn off swiping with Magic mouse

I have the magic mouse with a brand new 27 inch iMac, running OS 10.6.2. The magic mouse is almost unusable in any spreadsheet because the sheet will suddenly shift left and right because of my tendency to have two fingers on the mouse. This is true in Excel as well as Google's online spreadsheets. So I decided to turn off two finger swiping, but it still does it! Do I need to revert to a regular mouse or is there an easy fix?

I am experiencing a somewhat similar problem with the Magic Mouse: I cannot disable the lateral scroll feature. This is terribly frustrating whenever coming across a page that extends beyond the width of the screen: It is virtually impossible to scroll vertically without some concomitant lateral scrolling!
I've spoken with Apple Care about this... and the techs there were "surprised" that lateral scrolling could not be disabled! Their advice: wait until some 3rd party utility comes along to solve the problem!

Turn off cellular from control center?

Hi,
I\m considering getting one of the new iPads, and right now the choice is between ordinary WiFi and the 3G models.
What I need to know is whether it's possible to quickly turn cellular/3G off via control center? I will not have need for constant cellular access, the way I do on my iPhone, so I want to be able to turn cellular on and off quickly.
Thanks.

Welcome to the Apple Support Communities
If you want, you can disable the IR port in order to be able to stop control your computer with the Apple Remote. To do it, open System Preferences > Security & Privacy > General > Advanced, and mark "Disable remote control infrared receiver"

Can't turn off WiFi Power Management with iwconfig

I had an issue with my WiFi connection dropping occasionally, and I found that my situation was the same as described in this part of the Wicd wiki article: <https://wiki.archlinux.org/index.php/Wi … connecting>, so I used iwconfig to turn power management off, like it said. But, the disconnecting issue is still there. I think power management is still on, because of this:
[<...>]$ cat "/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0/power/control"
auto
[<...>]$ cat "/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0/device/power/control"
on
Yet, iwconfig still shows that power management is off:
[<...>]$ iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"<...>"
Mode:Managed Frequency:2.437 GHz Access Point: 00:21:A0:F9:FD:C3
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=48/70 Signal level=-62 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:2 Invalid misc:239 Missed beacon:0
Info
Using Wicd for network management
Wireless card: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
Using systemd
[<...>]$ systemctl | grep net
sys-devices-pci0000:00-0000:00:1c.1-0000:02:00.0-net-wlan0.device loaded active plugged AR9485 Wireless Network Adapter
sys-subsystem-net-devices-wlan0.device loaded active plugged AR9485 Wireless Network Adapter
wicd.service loaded active running Wicd a wireless and wired network manager for Linux
network.target loaded active active Network
Last edited by thorion (2012-11-02 19:42:57)

Haven't had this problem since I switched to NetworkManager, even with power management on...

Can i turn off any remote control or lock the Apple TV for use with AirPlay only?

I am using multiple Apple TV's in a business environment within one network. It all works fine except the fact that people with a remote control or remote app can configure them, which is unwanted. Is there any way to lock the Apple TV so it cannot be used by any remote feature anymore? Or is there another suggestion that might solve my issue?

Block the IR receiver to stop physical remotes from working.
Use an Apple ID that no one else has for enabling Home Sharing, or don't enable it.
The Remote app requires Home Sharing be enabled on the ATV and that the ATV and iOS device use the same Apple ID.

How can I turn off compatibility with 7.1 when labview 8 converts my 7.1 code?

Hi,
I just loaded LV8 on my mac. It converted/compiled my app code to 8. While doing that, it changed many of my constants to hidden controls to maintain combabtibility with 7.1. I really don't care about 7.1 anymore. Is there a way to turn this off so I can re-compile the code and keep it the way it is?
Obviously, I am new to LV but I don't see a reason for keeping the compatibility with 7.1 if my lab is going to 8.
Any thoughs, comments, or critisims would be appreciated.
tarek316

The particular issue you're talking about isn't necessarily "compatibility" with LabVIEW 7.1...it's actually ensuring that your VIs behave the same in 8.0 as they did in 7.1. As described in that dialog box, a change was made in LabVIEW 8.0 regarding how VI diagrams are compiled in regards to Case Structures with cases that will never run. If you are using case structures with constants wired to their selectors purely to keep VIs in memory at particular points in your code, then you should heed the advice given in the context help for the created control and use a Static VI Reference in your code instead of a subVI in a case structure. If you are using case structures with constants wired to their selectors to comment out code, perhaps you should use the Diagram Disable structure instead.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Can i turn off wifi on time capsule?

Trying to limit my kid's inline time, is there a way to control the wifi on my time capsule?
thank you

You have at least two methods:
Disable the wireless radios, or
Use Timed Access Control to limit the times certain devices (by their MAC addresses) have access to the TC itself.

How can I turn off Respond with text option on iphone 5s

I would like to disable the respond with text option, several times while taking the phone out of my pocket I responded to call I wanted to answer

Try this:
Go to Settings/General/Passcode lock/ Allow access when locked/disable
Reply with message

Turn off apple remote control from my macbook pro

How can I turn off my remote control from remoting both apple tv and myc macbook pro at same time. I just want to remote my apple tv.

Welcome to the Apple Support Communities
If you want, you can disable the IR port in order to be able to stop control your computer with the Apple Remote. To do it, open System Preferences > Security & Privacy > General > Advanced, and mark "Disable remote control infrared receiver"

I renewed my battery and now can't get signal its constantly searching and antenna is connected and getting wifi told to factory reset my phone but can't as find my iPhone won't turn off even with my password any help pls

i renewed my battery and now cant get signal its constantly searching antenna is connected and getting wifi told to factory reset my phone but cant turn off find my iphone to reset even with my password pls help

If you need to restore your phone but can't turn off Find My iPhone, you'll have to force it into recovery mode in order to restore it, as explained here: http://support.apple.com/kb/ht1808.

TS1559 I have problem with my iPhone 4s, the problem is i can't turn on wifi, when i go to the setting then to the general and then to the about, i see there is wifi address for my iPhone but still i can't turn it on, please help me

I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the s

I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Can I turn off the wireless on my Time capsule? Could I then use it as an XHD backup on a different wifi router network?

I would like to turn off the wifi on my Time Capsule, use another, more powerful router, but still use the TC as an XHD for backing up my files. Is this possible? thanks.

The TC is now and always a network drive.. but there is no reason you cannot turn off wifi in the TC and use it plugged into another router. The only thing I would say is that using the TC wireless can still be worthwhile.. if you can get it close enough to the computer, then either ethernet or TC wireless will prevent the backups from slowing your network..
If you are going to use it on only a single computer, you can plug it in by ethernet and setup as a secondary network.. but IMHO you may as well buy a USB drive and be done with it. The external drive is faster and more reliable for backups than the network drive.

I can't turn off wifi with Control Center

Similar Messages

Maybe you are looking for