HTML MAIL

Using Standalone workflow 2.6.2 on windows NT.
Trying to send html notification but when we open up the email in Microsoft Outlook we just get the html tags as follows:
<HTML><HEAD></HEAD>
<BODY BGCOLOR="#FFFFFF"><b>Oracle Workflow Notification (FYI)</b>
<br>
<hr>
<P>THis is to test the workflow mailer
</BODY>
</HTML>

This limitation of MS Outlook can be resolved by:
1) Ensuring that your users have the
NOTIFICATION_PREFERENCE of 'MAILATTH'
AND
2) Using the parameter 'HTML_MAIL_TEMPLATE' in the Mailer
Configuration File and setting it
to 'OPEN_MAIL_OUTLOOK'

Similar Messages

  • How can I create an HTML Mail signature?

    I've spent the evening searching for a way to create an HTML Mail signature with no luck.  My problem is that when I create a new signature in Mail and close mail I try the following:
    1.  Create an HTML signature in Dreamweaver CS6
    2.  Open it in Safari &amp; save it as a .webarchive to the desktop &amp; close Safari &amp; Dreamweaver
    3.  Open the signature folder (through Finder) and copy the Mail generated name (.mailsignature or it could be .signaturemail - can't remember) &amp; delete the file
    4.  Click on the .webarchive and replace the name with the .mailsignature
    5.  Copy the new .mailsignature file &amp; paste it to the signature file
    6.  Open mail and try to use the signature
    7.  NOT WORKING
    THANK YOU IN ADVANCE FOR ANY SUGGESTIONS!
    PS  I use iCloud if that makes any difference.

    This tutorial is great!
    http://mydesignpad.com/create-a-complex-html-email-signature-for-mail-on-mac-os- x-10-9-mavericks

  • Is there any way, to create with Adobe Muse HTML-Mail Templates?

    Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
    tanks for help!

    Off the top of my head, you should be able to create mail templates in muse BUT it will require  very basic html/css knowledge on your part. I am assuming you want to do just the signature?
    Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
    This seems like something that would be done alot quicker in dreamweaver in design view.
    PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

  • In BCS HTML mail images are broken

    HI experts,
    I'm using the BCS calls to send out nice looking HTML which also includes one logo.
    Internally, in our LAN, the mails are looking quite nice and the image/logo is displayed correctly (MS Outlook)
    When external users using Lotus Notes try to open such an HTML mail, the image is attached correctly to the mail, but it isn't displayed, just a broken image picture. There's no chance to make the image visible inside the mail, they can just open the attached image itself, outside the mail context.
    Question is now how can I reach that the image is displayed correctly? If this is not possible at all, how can realize that the Lotus Notes users get a "Show Images" link (security restriction - add sender to safe senders)???
    Please find my current coding below, do I miss a parameter some where???
    Best regards, Steffen
    "Create Mail Document
      l_subject = 'Expiring Authorization Notification'.
      TRY.
          lr_email_body = cl_document_bcs=>create_document(
                                           i_type = 'HTM'
                                           i_text = i_mailtext
                                           i_subject = l_subject ).
        CATCH cx_document_bcs .
      ENDTRY.
      "Add attachment to mail  
      TRY.
          lr_email_body->add_attachment(
                    i_attachment_type     = 'GIF'
                    i_attachment_subject  = 'sap_logo'
                    i_att_content_hex     = pick_data ).
        CATCH cx_document_bcs .
      ENDTRY.
      "Create mail object
      TRY.
          lr_email = cl_bcs=>create_persistent( ).
        CATCH cx_send_req_bcs .
      ENDTRY.
      "Set email document
      TRY.
          lr_email->set_document( lr_email_body ).
        CATCH cx_send_req_bcs .
      ENDTRY.
      "Set status attribute for read receipt
      "Read receipt should also be disabled in TCODE SCOT
      "N  No Status Is to Be Returned, suppress also in SOST
      "E  Only Error Statuses Are to Be Returned
      "A  Return All Statuses
      l_request_status  = 'N'.
      l_status_mail     = 'N'.
      "Set that you don't need a Return Status E-mail
      TRY.
          lr_email->set_status_attributes(
                  i_requested_status = l_request_status    "E=suppress read receipt N=suppress also in SOST
                  i_status_mail      = l_status_mail ).
        CATCH cx_send_req_bcs .
      ENDTRY.
        TRY.
            lr_receiver = cl_cam_address_bcs=>create_internet_address( l_mail_address ).
          CATCH cx_address_bcs .
        ENDTRY.
        TRY.
            lr_email->add_recipient( i_recipient = lr_receiver ).
          CATCH cx_send_req_bcs .
        ENDTRY.
      "If not imported create BCS sender from sy-uname
      IF i_sender IS INITIAL.
        TRY.
            l_sender = cl_sapuser_bcs=>create( sy-uname ).
          CATCH cx_address_bcs .
        ENDTRY.
      ELSE.
        l_sender = i_sender.
      ENDIF.
      "Set Sender
      TRY.
          lr_email->set_sender( l_sender ).
        CATCH cx_send_req_bcs .
      ENDTRY.
      "Send email directly
      TRY.
          lr_email->set_send_immediately( 'X' ).
        CATCH cx_send_req_bcs .
      ENDTRY.
      "Now send the mail
      TRY.
          l_send_result = lr_email->send( i_with_error_screen = 'X' ).
        CATCH cx_send_req_bcs .
      ENDTRY.

    I also had this problem with the Oracle HTTP Server and mod_plsql install.
    I battled with this for a while, I manged to get the images displayed etc.. by adding the following directive in httpd.conf
    <Directory "/yourpath/Apache/Apache/apex/images/">
    allow from all
    </Directory>
    Still playing around with it - perhaps I need to dig further/security rules etc..
    But at least its something.

  • How to send HTML mail with images multipart/related message

    Hi,
    Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
    Thanks

    Hi,
    Could any body tell me how to send HTML mail with
    ith images in "multipart/related" message,if any body
    can give the code ,it would be helpful.
    ThanksHi!
    Refer to
    http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
    I've found it very helpful.
    Look at the last part for a code showing how to send HTML mail!
    Regards

  • Sending HTML Mails using SO_DOCUMENT_SEND_API1

    Dear all,
    we were using SO_DOCUMENT_SEND_API1 to send plain text e-mail replies to participants of an incentive program. Now the customer wants to send HTML mails. Customer has provided HTML templates for the mails, and the text always is the same, only slight changes in regard to the particpants number occur. Has anybody ever performed sending HTML formated mails without using SmartForms?
    Thanks for your help!
    Kind Regards
    Chris

    Sure.. here is a sample program.
    report zrich_0002.
    data: maildata   like sodocchgi1.
    data: mailtxt    like solisti1 occurs 10 with header line.
    data: mailrec    like somlrec90 occurs 0  with header line.
    start-of-selection.
      clear:    maildata, mailtxt,  mailrec.
      refresh:  mailtxt, mailrec.
      perform build_text_message.
      perform build_receivers.
      perform send_mail_nodialog..
    *      Form  BUILD_TEXT_MESSAGE
    form build_text_message.
      maildata-obj_name = 'TEST'.
      maildata-obj_descr = 'Test Subject'.
      mailtxt  = '<html>'.
      append mailtxt.
      mailtxt  = '<head>'.
      append mailtxt.
      mailtxt  = '<title>Untitled Document</title>'.
      append mailtxt.
      mailtxt  = '<meta http-equiv="Content-Type" content="text/html;'.
      append mailtxt.
      mailtxt  = 'charset=iso-8859-1">'.
      append mailtxt.
      mailtxt  = '</head>'.
      append mailtxt.
      mailtxt  = '<body>'.
      append mailtxt.
      mailtxt  = '<div align="center"><em><font' .
      append mailtxt.
      mailtxt  = 'color="#0000FF" size="+7" face="Arial,'.
      append mailtxt.
      mailtxt  = 'Helvetica, sans-serif">THIS'.
      append mailtxt.
      mailtxt  = '  IS A TEST </font></em><font' .
      append mailtxt.
      mailtxt  = 'color="#0000FF" size="+7" face="Arial,'.
      append mailtxt.
      mailtxt  = 'Helvetica, sans-serif"></font>'.
      append mailtxt.
      mailtxt  = '</div>'.
      append mailtxt.
      mailtxt  = '</body>'.
      append mailtxt.
      mailtxt  = '</html>'.
      append mailtxt.
    endform.
    *      Form  BUILD_RECEIVERS
    form build_receivers.
    *  mailrec-receiver = '[email protected]'.
      mailrec-rec_type  = 'U'.
      append mailrec.
    endform.
    *      Form  SEND_MAIL_NODIALOG
    form send_mail_nodialog.
      call function 'SO_NEW_DOCUMENT_SEND_API1'
           exporting
                document_data              = maildata
                document_type              = 'HTM'
                put_in_outbox              = 'X'
           tables
                object_header              = mailtxt
                object_content             = mailtxt
                receivers                  = mailrec
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
      if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.
    Regards,
    Rich Heilman

  • Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

    Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • When I forward a HTML mail, the mail arrive stripped in a lot of archives

    When I forward a HTML mail or even a simple rich text, the mail arrives to the receipts stripped in a lot of archives.
    Example: If is a history of three mails, will arrive three or more (if have photos) archives to be opened as .html in some browser + the photos archives.
    I use: OS X 10.9
    The server is a exchange server.
    The strange reason is because IF I REPLY, the mail arrives well. Only if I forward manually and/or automatic (some rule), happen what I informed above.
    Any tip?
    Thanks

    Thanks to the tip. But I am very upset that Apple have no solution to this. I mean, if you have the option to forward, if you have the option to resend in HTML. Why we need to find ways to do this?
    It is a shame after buy a MAC start to bw aware about a lot of problems....
    Thanks again...

  • Number in html mail in a link

    we have found a bug in the new gw2014-client:
    if any numbers are in a html mail in a link, the link doesn't work, the dialer will be open
    the novell Support has been informed

    Cgreiner wrote:
    > we have found a bug in the new gw2014-client:
    >
    > if any numbers are in a html mail in a link, the link doesn't work, the dialer
    > will be open
    >
    > the novell Support has been informed
    Can you provide a little more info here? I cannot duplicate this, so it must be
    reliant on specific setup. Did Novell give you a bug number to reference?
    Danita
    Novell Knowledge Partner
    Upgrading to GroupWise 2014? We've got you covered
    http://www.caledonia.net/store
    If you find this post helpful and are logged into the web interface,
    show your appreciation and click on the star below...

  • HTML Mail content in Sender Mail Channel

    Hi Experts,
    I am doing a PoC using sender mail channel to read an incoming HTML email & take few values from the mail body to send out as proxy message. Settings in my Sender channel are Transport Protocol: IMAP4 & Message Protocol: XIPayload. I have tried the "Use Mail Package" parameter checked & unchecked. If "Use Mail Package" is checked the XML payload I am getting contains the mail body under <Content> tag with all HTML tags.
    Without "Use Mail Package" option checked the content is coming as plain text as below.
    I have tried adding modules MessageTransformBean & ASMA setting "IMail.AssumeXMLContent=true". But Not able to make the content into mapping ready XML. Is it possible to convert the HTML email body into mapping ready XML or I should use Java or XSLT mapping to work on the HTML mail body?
    Thanks in advance for any help.
    Regards
    Prem A.

    Hi Amit,
    Thanks Amit. I will try XSLT or Java mapping for this scenario. Appreciate your help.
    Regards
    Prem A.

  • Using Safari to send HTML Mail message but Mail keeps dropping images?

    I'd like to use Safari to send html Mail messages, but when I click on File>Mail Contents... Mail opens a new window but my graphics are gone. (I'm creating the html pages using MS Word for the Mac.) I get a flash of the graphics for a second, and then they are replaced by a little blue lego. Any ideas? I've tried all kinds of mail preferences but nothing seems to help.

    Figured it out (at least one way): had to load the image to a server and then add the image as a link only (uncheck "save picture with document" box).

  • Send html mail with apple mail

    I used to send a html newsletter with apple mail. I opened the html file in safari pressed cmd + i and a html mail was created. On Yosemite there seems to be a bug with this feature. After pressing cmd + i it creates a mail and html website is selected in this mail, but the mail body is empty. Now I have no ideo how to send the newsletter. Apple mail was the only way to achive a correctly displayed newsletter on most common mail clients.
    Does anyone have the same problem or a solution?

    Seems to be a bug in Safari under Yosemite. Occurs only with HTML pages which are stored locally on the Mac and then opened with Safari.
    Two options for a work around:
    (1)
    When Apple Mail shows a blank page, choose PDF instead of WEB PAGE in the mail header.
    Thereafter, the contents will appear as a PDF attachment.
    (2)
    Publish the HTML page. Surf with Safari to the published page. Use the command "File : Send : Email this page".
    Now it should work.

  • Send HTML mail with flash

    Hi
    Does anybody knows how to send a HTML mail with flash to a
    person?
    grtz
    Tom

    Hi!
    You need to use a serverside script like php or asp. I have a
    html string in
    the swf which I send as LoadVars.send() to the server.
    Of cource the server has to be configured correctly to
    support the mail
    function.
    //Micke
    "MatMaar" <[email protected]> skrev i
    meddelandet
    news:e3atb2$c2r$[email protected]..
    > Hi
    >
    > Does anybody knows how to send a HTML mail with flash to
    a person?
    >
    > grtz
    > Tom

  • Send HTML mail with an image

    Hi there,
    I'm trying to send html mail with an image. I'm able to see the image but in another section, at the very bottom of my message. Is it possible to display the image in the main part of my message ?
    Here my code :
    MimeMultipart multi = new MimeMultipart();
    BodyPart messageBodyPart = new MimeBodyPart();
    String htmlText = <H1>Test</H1><img src=\"cid:image\">";
    messageBodyPart.setContent(htmlText, "text/html");
    multi.addBodyPart(messageBodyPart);
    MimeBodyPart imagePart = new MimeBodyPart();
    DataSource fds = new FileDataSource("C:\\Resources\\Templates\\logo.jpg");
    imagePart.setFileName( "geologo.jpg" );
    imagePart.setDataHandler(new DataHandler(fds));
    imagePart.setHeader("Content-ID","<image>");     
    multi.addBodyPart(imagePart);
    msg.setContent(multi);
    Transport.send(msg);

    How many different e-mail clients have you tested that with?

  • How to send Html Mail through navigateToUrl() with contentType "text/html" for Android ?

    Isn't it possible to send Html Mail through navigateToUrl() with contentType "text/html" for Android ? please suggest any workaround
    Thanks

    AHHHH
    What you can do to make HTML for Apple Mail is to make it in an HTML editor, open it with Safari use CMD+i - a new mail message will appear in a moment with the web page in the email body.
    You can't do any major editing in Mail, you'll have to go back to the HTML file. But it works.
    You can also use Copy (from a web page) and then (Edit) Paste as HTML (that what Paste as HTML is for, not for creating HTML email). You can also user Paste as HTML to copy/paste a HTML email you receive or part of a HTML email.

  • When sending html mail from ocfo or direct telnet smtp_in returns an error

    <lots of markup/>
    ......<snip>
    <P class=MsoNormal><FONT face=Arial size=2><SPAN
    style="FONT-SIZE: 10pt"><o:p> </o:p></SPAN></FONT></P></DIV></BLOCKQUOTE></BODY></HTML>
    500 5.6.0 Data command failed: too many headers
    550 5.7.1 Closing connection
    Connection closed by foreign host.
    Has anyone seen this problem? I get the feeling that smtp_in is counting every html tag as a header, should I increase the "Maximum Number of Headers Allowed in a Message" parameter in smtp_in to fix this problem? If so what might be a reasonable setting? I increased it from 1000 to 2500 but could not get a particular email to send. Small amounts of HTML send ok.
    thanks!

    OK, I think I have narrowed this to a problem somewhere between the listener and SMTP_IN. This problem only occurs when using SMTP over SSL. I switched my two SMTP_IN processes, I made the non-SSL into SSL and vice-versa. The problem followed the process with the SSL configuration. I have no idea what in the listener configuration (or the smtp_in config as its shown through em) could caused this kind of problem. Small html mails with basic markup in them work fine over SMTP SSL, but big html mails with lots of nasty markup alway fail, they just stay in the outbox and then ofco needs several folder refreshes (or restart) in order to be able to again view any of the "mail" type folders (imap).
    Thunderbird also has these symptoms minus the need to refresh/restart after a failed html mail sending attempt.
    Anyone seen/seeing anything like this?

Maybe you are looking for