HTML Mail content in Sender Mail Channel

Hi Experts,
I am doing a PoC using sender mail channel to read an incoming HTML email & take few values from the mail body to send out as proxy message. Settings in my Sender channel are Transport Protocol: IMAP4 & Message Protocol: XIPayload. I have tried the "Use Mail Package" parameter checked & unchecked. If "Use Mail Package" is checked the XML payload I am getting contains the mail body under <Content> tag with all HTML tags.
Without "Use Mail Package" option checked the content is coming as plain text as below.
I have tried adding modules MessageTransformBean & ASMA setting "IMail.AssumeXMLContent=true". But Not able to make the content into mapping ready XML. Is it possible to convert the HTML email body into mapping ready XML or I should use Java or XSLT mapping to work on the HTML mail body?
Thanks in advance for any help.
Regards
Prem A.

Hi Amit,
Thanks Amit. I will try XSLT or Java mapping for this scenario. Appreciate your help.
Regards
Prem A.

Similar Messages

Add Bullet point in mail content in send mail

Hi,
Can you please let me know how to add Bullet point in the mail content while sending email from SAP programatically??

do you generate mails by custom program?
if yes, you can create a mail with body in TXT or HTML formats. For TXT, simply use a star (*) character. For HTML, use
<ul>
<li>first bulleted line</li>
<li>second bulleted line</li>
</ul>
To send HTML body from a custom program, some examples are listed in wiki Sending Mails - Home Page.

How to send mails in HTML format from the send mail step of workflow?

Hi,
I have a requirement where I need to send mails in the html format from the send mail step of the workflows.
But what I found out that the html tags are not renderd and as such the output is in plain text.
I know that there is an alternative of using an activity step and use my own custom code from within there,But due to certain business constraints, I need to use the send mail step only.
My SCOT settings are all right.
Please let me know how it can be done.
Thanks,
Samrat.

Samrat,
It can't be done, you have to use your own activity step.
What are these constraints that refrain you from doing that?
Rgds,
Patrick

Mail will not send mail, only receive.

I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
Any help would be greatly appreciated.
--DANIEL

This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
Earthlink has an authenticated SMTP server they changed to long ago.
SMTP Server: smtpauth.earthlink.net
Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
Use SSL: Off or not selected.
Authentication: MD5 Challenge-Response
User Name: Your ENTIRE Earthlink email address.
Password: The account's password - the same password used to check the incoming mail server for new messages.

Change Mail content for standard mail 'Simultaneous logon approval required' in 2 Envelop RFx

Hi Experts,
Please suggest, we have a requirement where we need to Change Mail content for standard mail 'Simultaneous logon approval required' and Simultaneous Logon Successful in 2 Envelop RFx in SRM.
Thanks.
Regards,
Gaurav

Hi Gaurav,
please implement BADI /SAPPSSRM/BD_SIM_LOGIN
Enhance Simultaneous Logon
Use
You can use this Business Add-In (BAdI) to incorporate customer-specific functions into the initiation and completion processes for simultaneous logon and to adapt simultaneous logon e-mail notifications.
Method PROCESS_FINISH
You use this method to add customer-specific functions to the simultaneous logon process. This method is called on completion of the simultaneous logon process.
The following parameters are provided
IV_EXT_GUID
Process ID of the external process
IV_MODE
Indicates the mode of the e-mail function (completion)
CV_SUCCESS
Indicates whether the process was successful
IV_SET_GUID
Process ID of the customer-specific process
Method PROCESS_INIT
You use this method to add customer-specific functions to the simultaneous logon process. This method is called on initiation of the simultaneous logon process.
The following parameters are provided:
IV_EXT_GUID
Process ID of the external process
IV_MODE
Indicates the mode of the e-mail function (initiation)
IV_SET_GUID
Process ID of the customer-specific process
Method SIM_EXT_MAIL
You use this method to change the content of the e-mail sent to participants on successful initiation, completion or failure of the simultaneous logon session and to define the external process that is calling the simultaneous logon application.
The following parameters are provided:
IV_OBJECT_ID
Business object identifier
IV_MODE
Indicates the mode of the e-mail function (initiation, completion or failure)
IV_EXT_MODE
Indicates the external process, for example, technical RFx response opening, of the calling application. This could be any process for which you want to use simultaneous logon.
CT_MAIL_BODY
Content of the e-mail
CV_MAIL_SUB
Subject line of the e-mail
Standard settings
If the customer does not define a BAdI implementation, SAP delivers a default BAdI implementation. The default implementation incorporates the simultaneous logon process with the two-envelope RFx response process. You cannot use the simultaneous logon process with standard RFxs in the default implementation.
Activities
Information about the implementation of BAdIs in the context of the enhancement concept is available in the SAP Library for SAP NetWeaver under BAdIs - Embedding in the Enhancement Framework.
Regards,
raghuveer

Adding e-mail address to "Send mail as"

In Gmail I was able to add an e-mail address to "Send mail as". I am able to pick this new address when I am on a computer but not on my iPad. How do I add a "Send mail as" address to the mail program on my iPad? The email address I am trying to add is not an account but is a group name created with the gmail address as a member.

try to go to https://m.google.com/sync/settings and enable option "send mail as" for you device

Can receive mail but not send mail

Hey, I can receive mail but cannot send mail. I previously had bellsouth mail and it worked fine, now I have a Charter.net account and I get a pop up every time I try to send mail saying, Mail couldn't be sent using the POP account Charter.net. I would really appreciate any help that some of you Mac experts could give me. It'd be nice to be able to send e-mail without having to go to the Charter website!
Thanks in advance for your help!
Lee

Ernie,
Is there any chance that this inability to SEND could be fixed by the removal of MessageRules.plist, MessageRules.plist.backup, MessageSorting.plist and MessageSorting.plist.backup that I have seen in other threads on Mail problems? I'm not having a complete failure of Mail, but I can't send mail (only receive).
I have contacted both my ISP (ATT) and my "second party" mail host (Godaddy.com) and all my settings are correct and things should, in theory, work fine -- but they don't!
Steve
Steve

WF mailer is not sending mail.

Hi,
WF mailer is not sending mail. earlier it was sending email. Nothing change in configuration.
Select * from WF_NOTIFICATIONS
mail_status is showing FAILED.
Earlier password reset was working also.
Please advice.

Please mention the details of the application release, database version and OS.
Please check the workflow log file as well as the database log for any details about the errors.
Also, see old threads which discuss the same topic.
http://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+not+sending+emails&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
http://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+not+working&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to send a mail in html format from a send mail workflow node ?

Dear all,
Do you know if it is possible to send an e-mail in HTML format (instead of RAW) from a "send mail" node in a workflow ? ... if "yes", please, let me know.
(I need to do that because I want to use the "href" tag to insert an hyperlink inside the e-mail)
- I haven't found any parameter to specify the format of the e-mail.
- Inside SCOT I tried to change the parameters for the SMTP node... without success.
- I don't want to use a task calling the FM SO_OBJECT_SEND.
Nicolas

Hi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir

HTML Tag problem when sending mails through APEX

Hi,
My code for sending mail is below:
DECLARE
l_body CLOB;
l_body_html CLOB;
cursor c2 is
SELECT pn,pdt_name FROM lib_details WHERE a_date BETWEEN to_date(:P13_SDATE,'DD-MON_YYYY') AND to_date(:P13_EDATE,'DD-MON-YYYY');
BEGIN
for c_lib in c2
loop
l_body_html:=l_body_html ||
'<html><body>
ul>
li>'||c_lib.pn||' , '||c_lib.pdt_name||' /li>
/ul>'; p;
l_body_html:=l_body_html ||'</body></html>';
apex_mail.send(
p_to => 'xxxx',
p_from => 'xxxx',
p_body => l_body_html,
p_subj => 'Test Mail');
END;
Gives me the output in the format below:
all the <html><body> tags also comes along with the email, though I get the correct output, what is the problem here?
I am not able to figure this out. Can someone help?
OUTPUT
<html><body>
ul> li>a,b
/ul><html><body>
ul> li>c,d
/ul><html><body>
PLEASE NOTE: I have intentionally removed the starting tags (<) of ul and li so that the post will not be formatted.
Edited by: Suzi on Feb 9, 2012 1:18 PM

>
Gives me the output in the format below:
all the <html><body> tags also comes along with the email, though I get the correct output, what is the problem here?
I am not able to figure this out. Can someone help?For HTML output you need to send it using the <tt>p_body_html</tt> parameter, not <tt>p_body</tt>.
PLEASE NOTE: I have intentionally removed the starting tags (<) of ul and li so that the post will not be formatted.Posting code wrapped in <tt>\...\</tt> tags eliminates the need to resort to these bizarre circumlocutions.

Separate valid mail attachment in sender mail adapter

Hi Experts,
I am working on Mail -> RFC scenario in pi 7.3.
Our channel is able to process new mail having valid attachement (i.e. .xml) file.
But sometime attachment contain invalid format also like pdf, or .txt file with valid attachment.
With these types of mail, channel throw error and do not process it. But my requirement is to separate the valid attachment and process it and delete it from mail box.
What our channel is doing is it skips these kind of mails and only change the status from unread to read.
Regards
Jitender

Hi Jean ,
I got the same issue too, the Scenario is MAIL ->FILE . Mail Sender Adapter picks up the 1 PDF attachment and saves in network folder successfully but not multiple attachments of a mail.
These are the setting in Module configuration I made:
1. The IMAPS was used in Mail Sender Adapter : imaps://10.192.101.16:993/Inbox
*IP address of the Mail Server was got from the Admin )
2. Ports : 143, 993 are opened for the Mail Server to access for XI SERver ( Raised an Ticket to open Ports of Mail server :NZTxxx.dknz.nzcorp.net)
3. As the attachment was only in PDF : Added swapbean in Module tab as below :
Process Sequesnce :
-Make sure: AF_Modules/PayloadSwapBean Modul key : TRANSFORM is added before sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
-And under Module Configuration select : TRANSFORM as Module Key and add >
swap.keyName Content-Disposition
swap.keyName Content-Description
swap.keyValue attachment;filename='MailAttachment-1.pdf"
swap.keyValue MailAttachment-1
-IF you get to know how to fetch multiple attachment , Please update.
Thanks,
Vara

Garbage in mail body when sending mail from abap code

Hi abapers,
i am sending mail from my program and when the data reaches in mailbox it is as follows.
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓
which is not proper.
I'm attaching the following part of code which i have used.Please let me know if i've made any mistake over here.
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'.
DOCDATA-SENSITIVTY = 'F'.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ     TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA = DOCDATA
      PUT_IN_OUTBOX = 'X'
      COMMIT_WORK   = 'X'
    TABLES
      PACKING_LIST = OBJPACK
      CONTENTS_HEX = I_CONTENTS_HEX
      CONTENTS_TXT = OBJTXT
      RECEIVERS     = RECLIST
   EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
what will be the problem..
please help out.
Regards,
Navin
Edited by: navin.c on Jul 10, 2009 8:08 AM

Hi Krishna,
I have attachment properly coming the problem is body of mail its is coming in some unknown language
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓剐䑏䌠䵏⁐低म剐䌠䵏⁐呓呁单䌉䵏⹐删充低म䅌呓䌠䅈䝎䑅䄠॔剐䑏䍕⁔䕄䅔䱉॓䡓䑁⁅䅎䕍匉䅈䕄䌠䑏ॅ䅂䕓丠䵁ॅ䅂䕓䌠䑏ॅ䅂䍔⁈啎䉍剅䴉乁䙕䝃䐠呁ॅ䅓偍䕌䄠䅖䱉䉁䱉呉ख़䉏䕓噒
what may be the problem?
I have used the same logic . im attaching my part of code for your reference .
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'.         "nsc070709+
DOCDATA-SENSITIVTY = 'F'.
* Describe the body of the message
*********new additon of mail content
* CONCATENATE 'Dear' L_FIRSTNAME ','
* INTO OBJTXT SEPARATED BY SPACE.
* APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ     TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* OBJTXT = 'Attached is the FIR PENDING CASES'.
* APPEND OBJTXT.
* DESCRIBE TABLE OBJTXT LINES TAB_LINES.
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOCDATA
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = OBJPACK
      CONTENTS_HEX               = I_CONTENTS_HEX
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
COMMIT WORK.
Can anybody help me out on this issue.
Its somewhat on priority.
Edited by: navin.c on Jul 10, 2009 12:58 PM

Do I have to use computer based mail app to send mail through Safari?

Can't believe I am confused on this...but....if I click on an email link in a web page that I am looking at in Safari, does sending email require opening and sending through a separate computer based mail app? My email accounts are through AOL, but doesn't seem that even if I sign in at AOL's website, that I can access a web page through them, and in turn have mail links link to my online AOL email page. That means that I have to use a mail app that people who access my computer and open and look into?

Hi Jim,
You can set up AOL mail using the Mac Mail application, instructions here.
http://macs.about.com/od/applications/qt/mailaol.htm
That means that I have to use a mail app that people who access my computer and open and look into?
Only if you share your login user name and password with them.
If you allow visitors to use your Mac, you can setup a guest account for them to use.
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15600.html
The instructions at that link are for v10.5 but it works fine for v10.6 as well.
Carolyn

Retrieve multiple e-mail address and send mail to multiple recipients

Hello,
I wonder if somebody could help me...at least with the clue to do the following.
I have a form, with a textarea , where the people should put the e-mail addreses of all the people that later will receive all the form data via e-mail..
I do not know how to retrieve all this e-mail addresses from the textarea (format?) and then how to send the e-mail to multiple recipients .
It works for one...but I do not know how to do this for several recipients...
could you please help?

There is a setReceiptants method on the Message object.
http://java.sun.com/products/javamail/javadocs/javax/mail/Message.html#setRecipients(javax.mail.Message.RecipientType,%20javax.mail.Address[])
You will need to create an array of Addresses to feed it (just make space, commas, and semi-colons be tokens in your string and iterate it to create the address array)
travis (at) overwrittenstack.com

Can get incoming mail but cannot send mail

Can get incoming mail but not send mail

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HTML Mail content in Sender Mail Channel

Similar Messages

Maybe you are looking for