HTML question regarding saving a Analytic Report

Hi - my question is regarding a Saved Siebel CRM report from Design View. Is there a way when users click on a Saved report that the report will open in a new window instead of inside the ReportIframe?

Try changing your Browser settings to open links in a new window.
Mike L.

Similar Messages

Question Regarding Crosstab or Matrix Reporting

Hi,
I have a Requirement Where I have to Create a Cross-tab Report,
We use XMLPublisher which is Bundled with R12...
our ERP version is :12.1.3
Our XML Publisher is :5.6.3.x.x
The Requirement Output is
I have Generate a report which should be a Pivot Report for Every item Entered by the User (it may be one or Multiple Item)
if one Item is Entered
I have To list the report as below
ITEM ID:1234 ITEM DESC: SquarePaper Plate =>Item Detail to be printed on top of the table.. Followed by
DATE is the Column field for the Crosstab
ORDER STATUS is the Row Field( Order Status will be of Five Types( BOOKED,ENTERED,AWAITING_SHIPPING,AWAITING_SHIPPING,SHIPPED,CLOSED) for the Crosstab
QTY is the Field Data Field for the Row Field(Order Status)..for the Crosstab
If More than One Entered
Then I have to Repeat the Same Logic to Produce Pivot Table for that many Items entered by the User..
For Cross Tab I have Found this Link by Vetsrini
http://winrichman.blogspot.com/2008/08/pivot-table-cross-table-with-fixed.html
I followed his Template and I am Getting the Crosstab Output but I am getting for all the Items as One report,
I could not get a Logic to Group or ( Repeating Group) by Item and Item Description..
Please help as I am Stuck at this Logic for almost 3 weeks and I have posted so 4-5 questions on this regards unfortunately No replies..
Thanks

Hi, Nagornyi,
Thanks for the Reply,
<?if:count(ITEM)=1?>
CROSSTAB_1
<?end if?>
<?if:count(ITEM)>1?>
CROSSTAB_2
<?end if?>
When I use this Method, I am getting this Error..
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: C:\Documents and Settings\aranganathan\Desktop\Currently Working\RTF\tpc_item_count_sum_ver6_test.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\aranganathan\Desktop\cross_tab_test\tpc_item_count_sample2.xml
FOProcessor setLocale: en-us
Output type: MHTML
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:629)
     at RTF2PDF.runXDO(RTF2PDF.java:470)
     at RTF2PDF.main(RTF2PDF.java:289)
Caused by: oracle.xdo.parser.v2.XPathException: Error in expression: './/=1'.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:614)
     ... 15 more
Also
My Question was
For Every ITEM_ID entered by the User, I have to Create Crosstab result grouped by ITEM_ID's
Say
if the User Enters one ITEM_ID then
I should Create the Report as
ITEM ID : 1234 ITEM_DESC: SQUARE PAPER PLATE -- Heading
CROSSTAB - Report result under the ITEM_ID, and ITEM_DESC
Say if the ITEM is more than ONE
ITEM ID : 1234 ITEM_DESC: SQUARE PAPER PLATE -- Heading
CROSSTAB - Report result under the ITEM_ID, and ITEM_DESC
ITEM ID : 2341 ITEM_DESC: ROUND PAPER PLATE -- Heading
CROSSTAB - Report result under the ITEM_ID, and ITEM_DESC
ITEM ID : 3421 ITEM_DESC: RECTANGULAR PAPER PLATE -- Heading
CROSSTAB - Report result under the ITEM_ID, and ITEM_DESC
ITEM ID : 4123 ITEM_DESC: TRANGULAR PAPER PLATE -- Heading
CROSSTAB - Report result under the ITEM_ID, and ITEM_DESC
Thanks
once again

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Questions regarding PO output in SRM 4.0

Hi All
I have several questions regarding the settings for PO output in SRM 4.0 ( Ext. classic)
Would really appreciate if someone provides me the rationale and business reasons behind some config settings:
I am referring to BBP_PO_ACTION_DEF transaction in IMG
1) What is the difference between Processing when saving document & immediate processing. SHouldn't the PO output be always processed after the PO is changed and saved?
2) In the Determination technology what is the significance of the term ' Transportable conditions'. Why would it be different if the conditions were manual and not transportable?
3) In the Rule type what is the signifcance of Workflow conditions? How workflow controls the output?
4) What is the meaning of ' Action merging' in layman's terms and what do each of the choices like "Max. 1 Unprocessed Action for Each Processing Type" signify.
5) What powers do the 'changeable in dialog' & 'executable in dialog' indicators assign to the user processing the PO. What happens if these indicators are not set.
6) What does ' Archive mode' in processing type signify. Are the PO outputs archived and stored?
Regards
Kedar

Hello,
Have a look at note 564826. It has some information.
As far as I know, processing time 'Immediate Processing' is not allowed. I really don't know the reason.
"Processing Time" should be defined as "Process using Selection Report" when an output should be processed by a report, such as RSPPFPROCESS, for example.
If you set this as "Process when Saving document", then the output will be sent immediately, otherwise you have to process it with transaction BBP_PPF.
I hope I could help you a little.
Kind regards,
Ricardo

Can SOD Analytic Report data be passed to a Inhouse DataWareHouse?

Can SOD Analytic Report data be passed to a Inhouse DataWareHouse?
We have built a user report, which has the data that needs to be sent to our Datawarehouse system on a dialy basis. Is Web Services capabale of this type of integation?

Hi Vetsrini!
I'm using standalone BIP. I'm using version 10.1.3.4.
I read about using DataProcessor class. Is there similar solution for standalone?
I want to do least set up on BIP side and pass on max info from Oracle Forms based application, like xdo name, xml data file name (this approach in order to avoid writing an SQL statement in BIP), template file name, parameters and their values. In the nutshell, specify maximum possible info in the application and pass it on to BIP processing engine to process it and output the report in required format.
Have been using PublicReportService webservice so far. But, it's not good enough to achieve what I need to.
I have gone through couple of articles like:
http://blogs.oracle.com/xmlpublisher/2007/03/getting_started_with_bip_apis.html
http://blogs.oracle.com/BIDeveloper/2009/12/can_we_design_bip_report_on_th.html
Your guidance will be of great help.
Thanks and kind regards,
Aparna

I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Error while saving Ad-hoc report in Portal

Hi Experts,
I am getting flowing error while saving Ad-hoc report in Portal
Transport system is active - could not save/change queries
Please let me know how to resolve this issue.
Thanks in Advance
Regards,
Ravi

Hi Ravi,
Try this ->
Go To RSA1---> Transport connection view
In the menu Edit -
>Transport----->Switch-off Standard.
Now open and try to save your report.
Hope this helps!
Regards,
Saurabh

Need to Remove html text in Saved PDF from OBIEE Dashboard

Hi,
It's OBIEE 10g related issue...
Customer wants a Dashboard as PDF, Dashboard has a footer which has a HTML link. While saving this Dashboard into PDF file, it has the HTML text in footer place rather than HTML link.
Can you please help me on this issue that how to resolve this.
Thanks in advance...

Hi,
This is a known bug in OBIEE. Refer to :
BUG:7369585 - SUPPORT OF HTML TAGS IN PRINT TO PDF (NARRATIVE VIEW, DASHBOARD TEXT OBJECT)
BUG:7476622 - HTML TO PDF NARRATIVE AND OTHER FORMATTING DIFFERS
BUG:8787191 - NARRATIVE DOES NOT DISPLAY CORRECT FONT SIZE AND CENTER IN PDF
BUG:9372634 - HTML TAGS SHOWN WHEN PRINT/EXPORT TO PDF
NOTE:749246.1 - OBIEE 10g: When a Report is Downloaded to PDF Format it Shows the Embedded HTML Option Tag Values in the Report.
BUG:12826562 - HTML TAGS AND CODE USED IN COLUMN FORMULA ARE VISIBLE IN REPORT PDF
BUG:5747757 - NARRATIVE VIEW IN PDF DOES NOT KEEP FORMAT
The workaround is to print the report to Excel or HTML.
Thanks,
-Amith.

Question regarding Calculated Key Figures in BEx and their impact on SQL

Hello,
I am new to BO SAP integration. I have a question regarding using CKF in BEx.
I created universe off of a BEx query with no CKF. I then created a Webi report with come dimensions and measures. I captured the SQL generated using trace (ST05).
In the same BEx, I then create a CKF. Then refreshed the universe and created a new Webi report using the same dimensions and the CKF. The SQL generated had many more select statements.
My question is what is the effect of CKF on the generated SQL and is there a performance issues using CKF in BEx as opposed to creating variables in Webi report?
Thanks,
Nikhil

Hi,
if your CKF will have always same unit and you have one KF in you inforpovider with this unit, you can try to do this trick
create a new hidden CKF as new CKF = KF / KF (with this equale new CKF = 1 unit)
change your old CKF as old CKF = old CKF * new CKF
let me know if it works.

HTML question regarding saving a Analytic Report

Similar Messages

Maybe you are looking for