Html window size?

hi,
i'm just wondering if its possible to make a pop up window
which is a fixed size with no menu bar just a close open at the
top. if so how can i do this please? its for a link on my website i
want a window 480x460 to open so i can display a flash file in it.
thank you

On 15 Jun 2007 in macromedia.dreamweaver, vt viewings wrote:
> i'm just wondering if its possible to make a pop up
window which is
> a fixed size with no menu bar just a close open at the
top. if so
> how can i do this please?
Sure - look at DW's built in 'Open Browser Window' behavior.
- Highlight the text you want the visitor to click to open
the window
- Make it a link. (Add "javascript:;" [without the quotes])
- With that text selected, go to the Behaviors panel, click
the '+', and
pick 'Open Browser Window'. Pick options as appropriate.
Most modern browsers won't let you completely eliminate the
chrome;
specifically, most of them retain the address bar.
> its for a link on my website i want a window 480x460 to
open so i
> can display a flash file in it.
Just make sure you check in several browsers to make sure
that the whole
thing is coming out as you want it.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

Similar Messages

Main window size for HTML Help

Hello again
I have looked at the archives and despite thinking I had seen
this particular issue covered before, I could not find anything. I
generate a HTML Help File with RoboHelp for Word x5.0.1 and would
like to set the default window size as at the moment my Help File
opens in a rather small window. Also if a user maximises the
window, closes the Help File and re-opens it, it still opens in the
small windows, i.e. the size settings were not save upon closing
the file.
Can anybody help? I reckon there must be some place (I
noticed the existence of the Edit > Windows menu but it only
seems to apply to WinHelp) I can set this up.
Thank you.
Regards,

In Project Manager, double click Windows and then the window
you use. There should be fields for setting the size. If not, check
that HTML is your primary output and then create a new window, then
you should see the fields.

Customize window size for HTML Help?

My .CHM file opens up in a ridiculously tiny window, and I
can't seem to change that from within Robohelp. I saw some
information on Rick Steve's site about customizing window sizes for
Webhelp and Flashhelp. I'm hoping there's a similar technique
available for HTML help.
Thanks!

In Project Manager, double click Windows and then the window
you use. There should be fields for setting the size. If not, check
that HTML is your primary output and then create a new window, then
you should see the fields.

Opening new HTML window without toolbars and set size.

Hi, I am researching the possibilities for opening a new HTML
window without toolbars and at a certain size. I have found a bunch
of tutorials and even this guide here at adobe:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14192
BUT
I work in Flash 8 and I use Dreamweaver 8.2 (with all the
latest updates). As you know Dreamweaver uses Java Script to
implement Flash into a HTML page. By generating a folder called
Scripts and the file AC_RunActiveContent.js
So I tri the methods described in the above technote. I even
found a guide at kirupa...and at flashkit. I even downloaded an
example file from Flashkit. But any implementation of any of the
methods above in a Flash 8 file implemented with DW does NOT work.
I am not a hardcore programmer. I am more the kind of guy who
finds code that works and moulds it to my purpose. Copy and paste
programming if you may. So its not so easy for me to see why it
wont work and where the problem is. But I do have a suspicion
towards the javascript flash implementation that Dreamweaver does.
So if anyone have guide or tips to how I can use Flash 8 and
DW 8.2 and get flash to open a new HTML window with a certain size
and without scroll or toolbars..that would be GREAT!!
Thanks in advance!
AKIRA

AKIRA,
The TechNotes are from the Cold Fusion site at Adobe. I am
not certain, but I think that you need to be using Cold Fusion on
your websites server to be able to use the functions to which you
refer. Again, I am not certain that I am right here, but it could
be a place to start research into the problem.
-john

AP Divs (layers) move when I open my website on different window size.

First of all, this is my first time trying to make a website.
I'm doing an assignment for my class and i found it difficult for me to fix. I have spend 4-5 hours researching online but nothing work for me.
Well,the problem is the AP Divs (layers) move when I open my website on different window size(iphone,ipad).
The website only look right on 1366 x 786 resolution. Please take a look at my 2 pics below:
And I don't know how to make the website to fit on the iphone and ipad so that I don't have to scroll down or sroll to the right to view the whole thing.
Please someone help me!
The code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="viewport" content="width=device-width" />
<title>Boston Green Community College</title>
<style type="text/css">

</style></head>
<body>
<div class="container">
<div class="header"><a href="#"><img src="Pictures/34d-1.png" alt="Insert Logo Here" name="Insert_logo" width="619" height="90" id="Insert_logo" style="background-color: #C6D580; display:block;" />
    <div id="apDiv11"><font color="#f4f1f1">
<script type="text/javascript">
var d=new Date()
var weekday=new Array("Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday")
var monthname=new Array("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec")
document.write(weekday[d.getDay()] + " ")
document.write(d.getDate() + ". ")
document.write(monthname[d.getMonth()] + " ")
document.write(d.getFullYear())
</script></font>
</div>
    <div id="apDiv1">


<form name="cse" id="searchbox_demo" action="http://www.google.com/cse">
<input type="hidden" name="cref" value="" />
<input type="hidden" name="ie" value="utf-8" />
<input type="hidden" name="hl" value="" />
<input name="q" type="text" size="40" />
<input type="submit" name="sa" value="Search" />
</form>
<script type="text/javascript" src="http://www.google.com/cse/tools/onthefly?form=searchbox_demo&lang="></script>
                              </div>
                                </div>
<div class="content">
    <center><img src="Pictures/DFDF11.png" width="959" height="556" longdesc="Pictures/junior-2-960x.jpg" /></h1></center>
</div>
<div class="footer">
     <img src="Pictures/RRR1.png" width="202" height="70" />
     <div id="apDiv3">
       <p> </p>
       <p><a href="Job.html">Jobs</a>         </p>
       <p><a href="Art Gallery.html">Art Gallery</a>         </p>
       <p><a href="Contact us.html">Contact Us </a></p>
    </div>
    <div id="apDiv4"><center>
<P>About</P>
<a href="visiting.html">visiting</a> | <a href="Map.html">maps </a>| <P><a href="About.html">about BGCC</a></P>
<P>Academic</P>
<P><a href="Courses.html">schools+courses</a></P>
<P>Admissions </P>
<P><a href="cost & aid basics.html">cost & aid basics </a>| <a href="Apply now.html">join BGCC</a>
<P>Studen Life</P>
<P><a href="Athletics.html">Athletics</a></P>
<P>Greenforce Education</P>
<P><a href="Career.html">career center</a></P>
</center> </div>
     <p><font size="2" color="black">BGCC | 99 GreenField | Boston, MA 02199 |617-0101-1000| TTY 617-0202-9944|</font></p>
    <div id="apDiv9"><a href="Donate.html" target="_blank"><a href="Donate.html"><img src="Pictures/three-green-logo.jpg" width="218" height="99" longdesc="Pictures/three-green-logo.jpg" /></div>
    <div id="apDiv8"><a href="Apply now.html" target="_blank"><a href="Apply now.html">
<img border="0" src="Pictures/cxgvxdvxgd.jpg" alt="Apply Now" width="218" height="99"></a></div>
</div>
</div>
</body>
</html>

That's what APDivs do. This is the single most common problem new people have with web page layouts. DO NOT use positioning. You don't need it. Start over. Learn to use CSS floats, margins and padding to align elements.
Below is a basic HTML5 Layout. View source in browser to see the code.
http://www.alt-web.com/sandbox/HTML5-BasicLayout.html
Nancy O.

How do I set the window size of a course in SumTotal (LMS)

I recently created an AICC course using Captivate 5.5 for a client using SumTotal as their LMS. When the client loads the course, the course launchs in a window that is smaller than the course itself; the user then has to adjust the window size to view the entire course. I have read on various posts that this cannot be controlled by myself through the .htm file settings, and that this has to be set within the LMS.
So my question is: Where and how does the client set the course window size within SumTotal? Does anyone know?!
thanks

No, edit the html files that come with Captivate. Either hand edit the
html file that is produced every time you publish, or locate the files
in the Captivate 5 directory and customise them to suite your needs.
Steve

CS5.5 Mac crashes every time I change Window Size in Design View

I'm using DW CS5.5 (version 11.5 build 5344) in Lion 10.7.3. I added in a couple of window sizes (in Preferences) that correspond to iPhone and Android phones - 320x480, 480x320, 480x800, 640x960. The 640x960 one works, as does a 592w one that came with Dreamweaver. Any of the other ones, though, cause the app to hang in this one particular file I'm editing. However, in the simple jQuery Mobile starter page DW creates, these resolutions work fine. This appears to be related to some CSS code that I have inside of a CSS media selector:
@media screen and (max-width:480px)
There is also a corresponding
@media screen and (min-width:481px)
in the CSS.
To test this, I created a window size of 481x320, and that seemed to work completely fine without crashing DW. The 480x320 one crashes DW. I assume that's because it's using the different CSS section.
Pasted below is the CSS code that goes along with the section that seems to cause the crashing:
@media screen and (max-width:480px) {
.column {
    margin: 1em 0;
    border-bottom: 1px dashed #7b96bc;
#visit, #points, #main {
    width: 100%;
    .taplist li {
    width:50%;
#map {
    display:none;
.header {
    display:none;
To further test this out, I commented out all of the code within that block. The window sizes did not cause it to crash then. I then started to add back in pieces of code to see when it began to crash. The crashing seemed limited to the bottom two (#map and .header), although it wasn't consistent. In some situations the window sizes would work and in others they would crash. I didn't test every combo just because it took a lot of time. With both of those in place, though, every one of the 480 or less sizes crashed.
Notable, the #map section is commented out in the HTML, however including that in the CSS still causes intermittent crashing.
I also deleted my cache file to see if that was it, and no luck.
Full code of the two files below (one HTML, one CSS)
ontap.html
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1" />
    <title>On Tap Now at The Splendid Walrus</title>
<link rel="stylesheet" type="text/css" href="taps.css" />
</head>
<body>
<div class="navigation">
      <ul>
      <li><a href="/">Home</a></li>
      <li><a href="ontap.html">On Tap Now</a></li>
      <li><a href="about.html">About Us</a></li>
    </ul>
</div>
<div class="header"><p>[The splendid walrus surveys his domain!]</p></div>
<h1>On Tap Now at The Splendid Walrus</h1>
<div id="ontap" class="column">
<h2>On tap this month:</h2>
<ul class="taplist">
    <li><img src="brews_images/bensons_bubbler.jpg" alt="Bensons Bubbler"></li>
    <li><img src="brews_images/chapman_lownsdale.jpg" alt="Chapman Lownsdale"></li>
    <li><img src="brews_images/crystal_springs.jpg" alt="Crystal Springs"></li>
    <li><img src="brews_images/hoyt.jpg" alt="Hoyt"></li>
    <li><img src="brews_images/mill_ends.jpg" alt="Mill Ends"></li>
    <li><img src="brews_images/milo_mciver.jpg" alt="Milo McIver"></li>
    <li><img src="brews_images/mount_tabor.jpg" alt="Mount Tabor"></li>
    <li><img src="brews_images/omsi.jpg" alt="OMSI"></li>
    <li><img src="brews_images/oxbow.jpg" alt="Oxbow"></li>
    <li><img src="brews_images/pittock.jpg" alt="Pittock"></li>
    <li><img src="brews_images/powells.jpg" alt="Powells"></li>
    <li><img src="brews_images/sandy_river.jpg" alt="Sandy River"></li>
    <li><img src="brews_images/sauvie_island.jpg" alt="Sauvie Island"></li>
    <li><img src="brews_images/the_grotto.jpg" alt="The Grotto"></li>
    <li><img src="brews_images/tryon_creek.jpg" alt="Tryon Creek"></li>
    <li><img src="brews_images/wells_fargo.jpg" alt="Wells Fargo"></li>
</ul>
</div>
<div id="visit" class="column">
<h2>Visit Us!</h2>
<dl>
    <dt>Location</dt>
    <dd>1543 SW Pretend Street<br />
    Portland, OR 97201</dd>
    <dt>Hours</dt>
      <dd>
        <dl>
          <dt>M-F</dt>
          <dd>Until midnight</dd>
          <dt>Sa-Su</dt>
          <dd>Until 1AM*<p><em><small>*At least</small></em></p></dd>
        </dl>
      </dd>
    <dt>Call us</dt>
    <dd>+1 (503) 555-1212</dd>
</dl>

</div>
<div class="footer">
<p>See you soon! Love, The Splendid Walrus</p>
</div>
</body>
</html>
taps.css
/* Everything Fluid */
/* Simple reset */
          margin: 0;
          padding: 0;
* Color, typography and basic layout
* (Shared for all devices and clients)
* Colors:
* - #f9f3e9 -> light cream (background)
* - #594846 -> Dark brown (body text, rules)
* - #42628F -> Dark blue (link text)
* - #7b96bc -> Medium-light blue (navigation and footer background)
body {
          background: #f9f3e9;
          color: #594846;
          font: 100% "Adobe Caslon Pro", Georgia, "Times New Roman", serif;
a, a:visited {
color: #42628f;
p {
margin: 0.5em 0.25em;
h1 {
font-size: 1.75em;
          border: solid #594846;
          border-width: 2px 0;
          padding: 0.25em;
text-align: center;
font-variant: small-caps;
h2 {
text-align: center;
font-variant: small-caps;
dl {
margin: 0 0.5em;
dt {
font-weight: bold;
margin: 0.5em 1em 0.5em 0;
border-bottom: 1px dashed #7b96bc;
.intro {
font-size: 1.15em;
line-height: 1.3em;
text-align: justify;
margin: 0.5em;
font-weight: bold;
.navigation {
background-color:#7b96bc;
border-bottom: 2px solid #594846;
.navigation ul li {
text-align: center;
display: block;
float: left;
padding: 0.25em 0;
.navigation li a {
color: #f9f3e9;
font-variant: small-caps;
text-decoration: none;
.header p {
margin-left: -1000px;
margin-top: 0;
#points ul {
list-style-image: url('images/point.png');
margin: 0.5em 0 1em 0.5em;
padding-left: 1em;
#points ul li {
margin: 0.5em 1em;
.footer {
background-color: #7b96bc;
color: #f9f3e9;
text-align: center;
padding: .5em 0;
font-style: italic;
/* Structure */
/* Common Structural Rules */
.header, .footer {
clear: both;
.header {
background:url('images/taps.jpg') repeat-x;
height: 300px;
.navigation {
min-height: 25px;
img, object {
max-width: 100%;
.navigation ul li {
width: 33.333%;
.header, .footer, .navigation {
width: 100%;
/* Brews List */
.taplist li {
display:block;
float:left;
text-align:center;
width:33%;
.taplist img {
width:100%;
margin-bottom:5px;
#ontap, #ontap ul, #ontap ul li {
background:#fff;
/* Wider viewports/higher resolutions (e.g. desktop) */
@media screen and (min-width:481px) {
.column {
    margin: 10px 1.04166667% 0 0;
#visit {
    width: 31.25%;
    float: left;
#points {
    width: 25%;
    float: right;
#main {
    margin: 10px 27.0833333% 0 26.0416667%;
#ontap {
    margin: 10px 0 0 32%;
/* Mobile/lower-resolution devices */
@media screen and (max-width:480px) {
.column {
    margin: 1em 0;
    border-bottom: 1px dashed #7b96bc;
#visit, #points, #main {
    width: 100%;
.taplist li {
    width:50%;
#map {
    display:none;
/* .header {
    display:none;

Thanks very much Chris for pointing me in the right direction. I downloaded FontDoctor, and it found one questionable font which I deleted. However CS5 continues to crash when selecting the Design Workspace. So I followed the steps outlined in the Adobe document you linked. When I got to the point of downloading the FontTest.jsx file and ran it, CS5 crashed right away without writing any log file. I turned on app.displayDialogs = DialogModes.YES, and CS5 is crashing with a TypeError: undefined is not an object. So I don't know if this is related to my original problem, or not. Any thoughts on how to proceed to get the FontTest script to run properly? I took all of the normal defaults when I installed CS5 (e.g., didn't select any alternate paths, don't have any add-ons installed, etc.).

Creating a site without scroll bar and dependent of window size

Hi,
I want to create a site that appears in the browser window without a scrolling bar, so all content is shown in that window and you don't have to scroll down (unless window size is ridicrously small).
Of course, there are contents that will not fit in the window like long texts but then I want this block of text to have its own scrolling bar so the only thing that scrolls is the text and not the other elements.
at http://www.artofwalls.com/rosannawalls you can see my attempts.
In the home page you can see how the background picture always adapts to the size and aspect of the browser window and how the menu keeps its position related to the lower left corner of the window. But if you click in "Biografia" (SEE BELOW) you can see a text that is too long so you have to scroll the screen to read it. What I want is this text appear inside the white transparent box and the height of this box end near the bottom of the window. To read the full text a scroll bar should appear inside this box and this scroll bar should scroll only the text inside the box, just like in the text box I'm writing this post now.
EDIT: DUE TO A BUG IN MUSE I HAVE ALREADY REPORTED LONG AGO, YOU CAN'T SEE THE PAGE BIOGRAFÍA BECAUSE IT IS EXPORTED AS biografía.html AND THE SERVER DOESN'T RECOGNIZE THE INTERNATIONAL CHARACTER (THE SOLUTION PROPOSED BY ADOBE WAS TO UPLOAD THE SITE TO BUSINESS CATALYST BECAUSE THEIR SERVER HAS NO PROBLEM WITH INTERNATIONAL CHARACTERS, BUT ALMOST ANY OTHER SERVER IN THE WORLD DO)
SO, TO SEE THE PAGE I'M TALKING ABOUT YOU HAVE TO GO TO http://www.artofwalls.com/rosannawalls/biograf%eda.html
Another strange side effect is in this page the menu has disappeared completely. If you scroll down all the page you will see the menu is not there.
Another thing I would like is to adapt the size of the white transparent box to the size of the browser window.
Here: http://www.margomusic.com/ you can see a page I made in Flash where you can see what I mean with the scrolling text inside the box (just let the intro pass and you will see the text)
And here: http://www.anemaecore.net is another page that adapts perfectly to the size of the browser window, but also made in Flash and also this site changes the size of the text instead of the size of the text container.
Any help will be greatly appreciated

Thanks for the replies. I guess I did not ask the question correctly so I will try to explain it better.
What if I want to use the FTP client inside of Dreamweaver to just connect to my server. I can connect to the FTP (see image) but how can I drag a folder from my desktop into the server using Dreamweaver?
I have downloaded a folder and I need to add it to my blog which is only on my server. I do not have a Dreamweaver site. Surely Dreamweaver isn't that archaic that you can't upload a file or folder to a server without having to create a site first. It was so much easier in GoLive.

How to set window size for target="I_blank"

when viewing a graphic file (only) in a blank window, how do
I set the
window size?
Also, what is the target="ImageWindow" command? I can find
very
little info on it.
Thanks

You're welcome - for what it's worth, I use the Kaosweaver
extension and
have heard good things about 'justso' as well., You can't
beat the price
and you get your moneys' worth, I use mine nearly every day.
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.macromedia.com/devnet/dreamweaver/css.html
- CSS Tutorials
"Canned Heat" <[email protected]> wrote in message
news:[email protected]..
> In fact, they just might! Thanks, I'll look into them.
>
> On Wed, 26 Apr 2006 13:20:10 +1000, ".: Nadia :. *ACE*"
> <[email protected]> wrote:
>
>>Would any of these extensions work for you?
>>they open a picture window to the exact dimensions of
your graphic.
>>
>>Great free extension:
>>www.dreamweaverfever.com/grow/
>>
>>another couple of extensions - commercial though:
>>
http://kaosweaver.com/extensions/details.php?id=62&cid=7
>>
>>and:
>>Just So Picture Window -
>>www.valleywebdesigns.com/vwd_dw_JSPW.htm
>

Set target window size

Hello
How do I set the target window size (say to 300 x 300px) when
using 'getURL' to open an HTML page. I have tried resizing the
target page on load in dreamweaver with no success.
Thanks

russell van gravy wrote:
> Hello
> How do I set the target window size (say to 300 x 300px)
when using 'getURL' to open an HTML page. I have tried resizing the
target page on load in dreamweaver with no success.
> Thanks
hi there
we done that subject literally hundreds of time. Please check
the forum archives
before posting, there hardly are any new questions you could
have which have not been
documented here :)
best place to search :
http://groups.google.com/advanced_group_search?q=group:macromedia.flash.*&hl=en&lr=&ie=UTF -8
look for "pop up" in the "with all of the words"
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Window size

Me again.
I would like to set the Main Window size to a particular
value but this does not seem to work for HTML generated from
RoboHelp for Word. I go to Edit > Window but whatever values I
choose, they do not seem to be taken into account when I open my
Help File. This setup works for WinHelp but not for HTML Help
Files...
Is there any way I can set the window size on opening of a
HTML Help File generated by using RoboHelp for Word?
Thanks in advance.

Thanks for the feedback, our team is working on improving this in future.
Cheers, Samuli

Too small window size in standalone flash player in FLEX

Hello,
I have unchecked the option "generate html wrapper file" so I
don't have to bother about closing the browser tab each time I make
a small change to the code and rerun the application.
This works fine as the standalone flash player closes when I
terminate the application from Flex. However, the standalone flash
player always starts in a fixed window size smaller than my
application size so that I cannot see the whole application. So I
have to enlarge the window size of the standalone flash player each
time which is annoying!
Is there a better solution?
Maybe get Flex to close the browser tab after I terminate the
application. I still prefer to use the standalone flash player
during development as my application doesn't depend on the browser
though.

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Flex 3 - About the Flex development tools:
Adobe Flex Software Development Kit (SDK) primarily provide
XML files that you use ... When you use the debugger version of
Flash Player or start your AIR
Link:
http://livedocs.adobe.com/flex/3/html/building_overview_2.html
Adobe - Flex 3:
While Flex applications can be built using only the free Flex
SDK, developers can use ... Alert This content requires Flash.
Download Flash Player now
Link:
http://www.adobe.com/products/flex/
Flex.org - Rich Internet Application Development:
I would like to extract data from my Flex application to a
CSV file for loading into Excel. However, the current Flash player
does not allow direct access
Link:
http://flex.org/
Adobe - Flex Developer Center:
Supports visual and code-centric development, code hinting,
visual debugging, and so forth. Includes the Flex 3 SDK and Flash
Player 9.
Link:
http://www.adobe.com/devnet/flex/
moockblog: Flash Player 9, Flex 2, ActionScript 3.0: A Survey
of:
Flash Player 9's main new feature is full support for
ActionScript 3.0 (but older ... Flex Builder 2 also includes a
development framework known as the Flex
Link:
http://www.moock.org/blog/archives/000189.html
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

Urgent please/ Window size + avoid saving

Hi I have 2 problems I hope you can help me with urgently
please:
1- I have the attached code in it there is a link(summary)
which once clicked, a new HTML window will open this window is of
the same size as the parent I need to make it smaller and appear in
the center of the parent window. I have played withthe 800X600
dimentios in the code but no use? Any idea
2- In the the new window( which will appear once clicking the
link summary), I need to make the 'save page as' and the 'send
link' in the file menu of the browser dim (inactive) as I do not
the user to save the content of this window ? any idea how to stop
the user from saving the content knowing that the content is a HTML
file that has a .swf file with its control buttons?
Appreciate a fast help
Thanks

Hello,
For 1, see this link:
http://www.peachpit.com/articles/article.aspx?p=31661&seqNum=2
The tutorial uses an image link to open the window but you
can easily use
text instead.
For 2, during the tutorial in the link above you'll see how
to not show the
menu bar in the popup window when you get to using DW's Open
Browser
Behavior.
It may deter the novice user, but anyone who wants to save
the content can
do so easily. Firefox can be set to show the menu regardless
of the script
telling it not to, or anyone can simply view the source code
and copy the
URL for the popup and paste it into a new window, complete
with menus.
Of course, there are also Firefox extensions that download
any Flash
displayed on a page including in a popup window.
In other words, if you don't want people saving it, don't put
it on the web.
Take care,
Tim
"fsurrey" <[email protected]> wrote in
message
news:[email protected]...
> Hi I have 2 problems I hope you can help me with
urgently please:
>
> 1- I have the attached code in it there is a
link(summary) which once
> clicked,
> a new HTML window will open this window is of the same
size as the parent
> I
> need to make it smaller and appear in the center of the
parent window. I
> have
> played withthe 800X600 dimentios in the code but no use?
Any idea
>
> 2- In the the new window( which will appear once
clicking the link
> summary),
> I need to make the 'save page as' and the 'send link' in
the file menu of
> the
> browser dim (inactive) as I do not the user to save the
content of this
> window
> ? any idea how to stop the user from saving the content
knowing that the
> content is a HTML file that has a .swf file with its
control buttons?
>
> Appreciate a fast help
> Thanks
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml"><head>
>
>
>
>
> <meta http-equiv="Content-Type" content="text/html;
> charset=iso-8859-1"><title>Tutorials_A
View:Different Web
> Designers</title>
>
> <style type="text/css">
> 
> </style>
> </head><body>
>
> <div align="center">
> <table width="611" border="0" cellpadding="0"
cellspacing="0">
> 
> <tbody><tr>
> <td colspan="2" valign="top"
>
height="115"> </td>
> </tr>
> <tr>
> <td rowspan="2" valign="top"
>
width="161"> </td>
> <td class="style31" valign="top" width="450"
height="24"><a
> href="../../My web site/my final web site/home.html"
> class="style28"><u>Home</u></a>
>
<a
> href="../../My web site/my final web site/links.html"
> class="style28"><u>Links</u></a>
>
           <a
> href="../../My web site/my final web site/About.html"
> class="style25"><u>About
> us</u></a>
>
             <a
> href="../../My web site/my final web site/links.html"
> class="style25"><u>Join
> us</u></a>
>
            <a
> href="../../My web site/my final web
site/contactus.html"
> class="style31"> <u>Contact
us</u> </a></td>
> </tr>
> <tr>
> <td valign="top" align="left"
height="511"><table width="449"
> border="0" height="437">
> <tbody><tr>
> <td valign="top" align="left" height="433"><p
align="left"
>
class="style25">          &nbs
> p;   <span
class="style61">  </span> <br
/>
>
>
<strong>          </strong></p
>>
> <p
>
class="style54">          &nbs
>
p;
>
             &n
> bsp;   </p>
> <p class="style52"><span
>
class="style57">          &nbs
>
p;
>
             &n
> bsp;  </span><br />
> <br />
>
>
             &n
>
bsp;      <span
>
class="style57">          &nbs
> p;
  . <a href="try/try.htm"
> target="_blank" class="style31"
onclick="openNewWin('../../The
> Tutorials/Summary/Summary/Summary.htm',800,600);return
> false;">Summary</a></span></p>
> <p
>
class="style25"><strong>         &n
>
bsp;         <span
>
class="style57">          &nbs
>
p;
</span></strong><br />
>
>
             &n
>
bsp;
</p></td>
> </tr>
> </tbody></table></td>
> </tr>
> </tbody>
> </table>
> </div>
>
> </body></html>
>

Windows size problem when resume apps, TTA SGD E4.0

Hi,
I have a problem and can�t find the solution yet.
I open windows apps in my desktop with a 800x600 resolution, the app is
configured for independent window, clients maximun size and fill my screen
completely as suppose to do. Then I close the window app clicking the X icon
to suspend the emulator session.
When I resume a suspended emulator session or move to other workstation and
take the session over the emulator session window size is 640x480 and stick
there whatever I try to do, worst is I can�t see the full window and also
there are no scroll bars, so I can�t reach the START icon on the lower left
to close the app because the session becomes useless.
The workarround solution was set the "scale to fit" properties in 640x480
and then I can see the full window to reach the star icon and close the app
to start over, but the user complain about the small letters and slow
performance. Another clue is if I click on the maximize icon the window try
to fill up my screen and then inmediatelly go back to 640x480.
[[root@arst1tta1 root]# /opt/tarantella/bin/tarantella version
Tarantella Secure Global Desktop Enterprise Edition for Intel Linux kernel
2.4+ (4.00.903)
Tarantella Secure Global Desktop Enterprise Edition Platform Identity Pack
for Intel Linux kernel 2.4+ (4.00.903)
Tarantella Secure Global Desktop Enterprise Edition Windows Connectivity
Pack for Intel Linux kernel 2.4+ (4.00.903)
Architecture code: i3li0204
This host: Linux arst1tta1.ar.lar.pi.pvt 2.4.9-e.34smp #1 SMP Wed Dec 10
16:52:22 EST 2003 i686 unknown
Any ideas ??
Thanks a lot in advance.
Marcelo

Carmelo,
Thanks for your answer but my problem is the Linux server OS, is Red Hat AS
2.1 wich is not supported in TTA 4.10.
When I tried to make the TTA upgrade failed due library issues.
Is my problem a reported bug for TTA 4.0 ???
Can you give any other advise or workarround ??
Regards.
Marcelo
"Carmelo" <[email protected]> escribi� en el mensaje
news:[email protected]...
there are some fixes in 4.10 that might help with this.
http://www.tarantella.com/support/documentation/sgd/ee/4.1/fixes.html
MarceloGonzalez wrote:
Sorry, I want to add that the same thing happens with a Linux KDE
session.
>>
"MarceloGonzalez" <[email protected]> escribi� en el mensaje
news:[email protected]...
Hi,
I have a problem and can�t find the solution yet.
I open windows apps in my desktop with a 800x600 resolution, the app is
configured for independent window, clients maximun size and fill my
screen
completely as suppose to do. Then I close the window app clicking the Xicon
to suspend the emulator session.
When I resume a suspended emulator session or move to other workstationand
take the session over the emulator session window size is 640x480 andstick
there whatever I try to do, worst is I can�t see the full window and
also
there are no scroll bars, so I can�t reach the START icon on the lowerleft
to close the app because the session becomes useless.
The workarround solution was set the "scale to fit" properties in
640x480
and then I can see the full window to reach the star icon and close theapp
to start over, but the user complain about the small letters and slow
performance. Another clue is if I click on the maximize icon the windowtry
to fill up my screen and then inmediatelly go back to 640x480.
[[root@arst1tta1 root]# /opt/tarantella/bin/tarantella version
Tarantella Secure Global Desktop Enterprise Edition for Intel Linux
kernel
2.4+ (4.00.903)
Tarantella Secure Global Desktop Enterprise Edition Platform IdentityPack
for Intel Linux kernel 2.4+ (4.00.903)
Tarantella Secure Global Desktop Enterprise Edition Windows Connectivity
Pack for Intel Linux kernel 2.4+ (4.00.903)
Architecture code: i3li0204
This host: Linux arst1tta1.ar.lar.pi.pvt 2.4.9-e.34smp #1 SMP Wed Dec 10
16:52:22 EST 2003 i686 unknown
Any ideas ??
Thanks a lot in advance.
Marcelo

Popup window size problem

Hi,
For some reason, the popup window link in my Flash website
opens up a popup which doesn't behave to the window size rules I
set.
The website is www.caveataudiens.net , click on the 'music'
button, and then on the Jukebox button to see as example.
The Jukebox button has the following actionscript:
on (release) {
//customize the window that gets opened
// 0 equals NO.
// 1 equals YES.
address = "
http://www.caveataudiens.net/music/mp3player.html";
target_winName = "kirupa";
width = 400;
height = 300;
toolbar = 0;
location = 0;
directories = 0;
status = 0;
menubar = 0;
scrollbars = 1;
resizable = 0;
//sends data back to the function
openWinCentre(address, target_winName, width, height,
toolbar, location, directories, status, menubar, scrollbars,
resizable);
and in my main actionscript layer I have:
stopAllSounds();
forum_btn.onRelease = function() {
getURL("
http://www.flaccidsacks.co.uk/phpBB2/",
"_blank");
music_btn.onRelease = function() {
gotoAndStop("music");
links_btn.onRelease = function() {
gotoAndStop("links");
about_btn.onRelease = function() {
gotoAndStop("about");
news_btn.onRelease = function() {
gotoAndStop("news");
Movieclip.prototype.openWinCentre = function (url, winName,
w, h, toolbar, location, directories, status, menubar, scrollbars,
resizable) {
getURL ("javascript:var myWin; if(!myWin ||
myWin.closed){myWin = window.open('" + url + "','" + winName +
"','" + "width=" + w + ",height=" + h + ",toolbar=" + toolbar +
",location=" + location + ",directories=" + directories +
",status=" + status + ",menubar=" + menubar + ",scrollbars=" +
scrollbars + ",resizable=" + resizable +
",top='+((screen.height/2)-(" + h/2 +
"))+',left='+((screen.width/2)-(" + w/2 + "))+'" +
"')}else{myWin.focus();};void(0);");
Can some kind soul help me figure out how to adjust the
window size?
Many thanks
lyle

Any ideas?
When I change the settings for toolbar, status, etc, then the
changes take effect, it seems though only the width and height
don't work for some reason.
I would be very grateful for any suggestions
Thanks
Lyle

Html window size?

Similar Messages

Maybe you are looking for