HTML5 UI is unable to correctly get the information of  key-events .

I have developed a plug-in for Illustrator CC2014.
But, The Plug-in UI which was built with HTML5, is unable to correctly get the information of  key-events .
As problems following.
    0-9 key press       : "keyCode" is "0"
    Shift key press     : "shiftKey"is "false"
    Alt key press        : "altKey"is"false"
Even if acquired at any timing(keydown, keypress, keyup) symptom occurs.
In the Windows, you can get the information of key-events is correct at the same implementation.
In the case of the browser UI, even in the Mac, I can correctly get.
What causes that can not be acquired key event information is correct on the plug-in?
Also, If you have any way to get the information of key-events correctly, please let me know.

Pulluran wrote:
I tried the event, but it does not resolve.
In the windows, onKeydownEvent(event) can get the event information correctly.
in the Mac, the keyevent information was originally can be get.The problem is that the keyevent information was not the correct information.
"in the Mac, the keyevent information was originally can be get"
What does that mean?
"The problem is that the keyevent information was not the correct information."
The problem seems to be that the event contains no information, keyCode is always zero and shiftKey and altkey are always false.
What happens if you try
function onKeydownEvent(obj) {
var keyCode = (obj.keyCode >= 96 && obj.keyCode <= 105) ? obj.keyCode - 48 : obj.keyCode;
var inputStr = String.fromCharCode(keyCode);

Similar Messages

  • HT5622 I changed my Apple password and I get the information at the wrong email address.  The correct email shows in my Apple account.  Why is the mail going to the wrong email? How do I fix it?

    I changed my Apple password and I get the information back at the wrong email address.  My email address is right under my Apple ID.  How do I get this corrected?

    AWDunams wrote:
    Okay so I associate the e-mail address as the apple ID and that seems to be a wrong assumption.  I did go to my Apple ID and changes the e-mail address and the password but for the same and only Apple account I have ...
    That is good.  In that case, your one and only account has not changed, just the login credentials you use for it.  All your previous purchases will remain associated with that account, and the new login.
    In essence, an AppleID is an email, but it has two parts.  One is the login email address and password everyone traditionally thinks of as an AppleID.  But that in turn is linked to an account with Apple.  As long as you use the manage Apple ID portal to just change the email address and/or password for your exisiting AppleID, then the internal account tracks along with those changes as well.
    However, on your iOS devices, you will need to log out and then log back in with the new login credentials:
    settings -> iTunes & App Stores - tap your AppleID, and choose log out.  Then log back in with the new email address and new password.

  • I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

    I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

    Hi,
    Which website your are using to update the Adobe Flash player? No Adobe website ever ask for any id and password to update the flash player.
    If you are using MAC machine and its the password prompt while installing update that you are talking about then please follow What userid & password do I need to install Flash Player?
    -Varun

  • Getting the Object Access key

    This weird question,
    But does any one know how to get the object access key for Standard SAP object is changed..
    Normally when we try to do any modification on Standard SaP object it asks for and access key.. We need to enter it once, after which the object is open for editing.
    I have an SAP object which as been modified .
    I want to know that number?? Is it possible..
    Any help will be highly appreciated..
    Regards,
    Samir.

    Hi Samir,
    You have to contact SAP Support to obtain the access key for a Standard SAP Object. The correct channel for that is the OSS, where yo can raise a message requesting the same.
    But you are saying that there's one object that has already been modified. Who has done the modification ? When they have done it, they must have specified the access key. If you want to modify the same object, then the best thing for you to do is to contact the person who has changed it.
    By the way, have the modifications been done using the Modififcation Assistant?
    Regards,
    Anand Mandalika.

  • I get the information while syncronize my iPhone "Not able to open ITunes error libobjc.i386.a.dll is missing" who can help me?

    i get the information while syncronize my iPhone "Not able to open ITunes

    Hi Coreenfrombc,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • How to restore deleted playlists to an itouch after syncing with wrong device. Tried to search for device to restore under devices and it completely removed it as a device on itunes. Is there anyway to get the information back?

    To start we have several users and devices on our itunes account....Several weeks ago I was using my itouch to create playlists for a few aerobics classes that I teach.  Right before I was about to unplug the itouch I got a notification that my itouch was full and didnt have any space left.  Since I was done with what I was doing at the time, I unplug my itouch and figured I would delete unwanted songs later to create more room. A week later, I went to sync my itouch into itunes and over the devices it told me that it was named another device and wanted to know if i wanted to sync the information to my itouch I had just plug in.  I had never seen this message before in all the other times I had used it, and at the time I didnt realize that it was giving my device the name of another user in my house. Without realizing it itunes started to sync the new information to my itouch.  I immediately unplugged the usb cable stopping the process.  I then replugged the usb cable in, hoping to get done what I needed to get done on my itouch thinking it might have just been a strange glitch. Also, since I hadn't notice any change on my itouch from the incorrect syncing, I continued to start itunes again.  This time it asked me the same question as before "did I want to sync the information from another ipod?". Since I didnt notice any changes before I just let it do the syncing not realizing at the time that it was earsing all the info I had on my itouch and replacing it with info coming from the other users ipod.
    I contacted Apple and they gave me infomation on how I could go look for my itouch under devices and get the information back.  When I did this my itouch was no longer there under the devices and it was replaced with the new name that itunes had given my itouch.  This device is one of the first generation itouches and has never been backed up that I know of... So my question to you all is...Is there any way of getting my playlists back???? I spend countless hours creating these playlists for my classes and have been completely out of my mind trying to figure out how I can possibly get the infomation back. Please let me know if you think there might be a way to do this!!!     

    The devices that are listed are: 2 under the name of the device that synced incorrectly with mine and then 3 others that are not associated with my itouch. The name of the ipod, before the incorrect sycning is no longer under devices.  It has been replaced with the incorrect one because I can see the serial # of my ipod under the wrong name.
    The playlists that are in my itunes library are from an ipod that I used a few times before I took this one over... Which happens to be the ipod that took on the ID of my itouch.
    Both of these ipods used to be my kids.. I used my sons a few times and then switched to my daughters.  They each had their names attachted to their particular devices and now it just says my sons, which is the ipod that itunes was connecting to when all this happened. The really strange thing is my son doesnt use his ipod any longer and now uses his phone for music...So, it had been a while since that particular device was even synced to itunes!
    I hope this helps!

  • Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

    Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

    No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (103501)

  • I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    First, back up your old iphone manually:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved: http://support.apple.com/kb/HT1766
    How to back up and restore: http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
    This is also explained in this article: http://support.apple.com/kb/HT4137

  • Getting the information from a harddrive

    My mother board burned up, so I had to buy a new computer,(tower only), however I havre lots of my business information on my old hard drive, which I did have a friend remoce from my old tower. When I called Staples to ask about buying a box to place the the hard drive in, so that it could be connected to my computer, the person on the phone said I would probably not be able to access the information on said hard drive.  After reading the posts here, it seems to me that I should be able to access the information.  Can I get the information on the harddrive onto a thumb drive?

    You just need an enclosure. I'm guessing it's out of a desktop, and IDE interface. You need this.
    If it's a SATA interface, you need this.

  • Is it possible to get the information from the complete forms send to different email account

    When i have a paid account is it than possible to get the information from the different forms send to seperate emailaddresses.
    Who dont have a account from formscentral but just need the information directly in there own inboxes?
    Because we're looking for a good and simple way to make qoustion & complain forms. But these need to go to different people in the company.

    You can have notifications sent to multiple email addresses, but each will need to have a FormsCentral account.  They can be free accounts.  What you do is create your form and set up the email addresses that you want the information to go to to be Co-authors or Contributors.  The co-author/contributor accounts will then need to log into FormsCentral, go to the Options tab and check the email notifications checkbox. 
    I hope this helps.
    -Jeff

  • How to get the information like IP address,Host name of connected clients v

    Hi Every one,
    I want to get the information like (IP Address,Hostname,Active sessions , Database Server….etc) of the connected clients
    via V$Views(ORACLE).
    And then I like to load these infromation into a table “Client_Table”.
    Could some one give me suggestion that which V$ views/method I use in order to get the above information and then
    how to load these information into a table “Client_table”?
    Your suggestions will be highly appreciated.
    With Regards
    BILAL

    You could use a LOGON TRIGGER so every session insert its own environment into your client_info table.
    You could use the following view and choose whatever attribute you need:
    create or replace view my_userenv (
    AUDITED_CURSORID ,
    AUTHENTICATION_DATA ,
    AUTHENTICATION_TYPE ,
    BG_JOB_ID ,
    CLIENT_IDENTIFIER ,
    CLIENT_INFO ,
    CURRENT_SCHEMA ,
    CURRENT_SCHEMAID ,
    CURRENT_SQL ,
    CURRENT_USER ,
    CURRENT_USERID ,
    DB_DOMAIN ,
    DB_NAME ,
    ENTRYID ,
    EXTERNAL_NAME ,
    FG_JOB_ID ,
    GLOBAL_CONTEXT_MEMORY ,
    HOST ,
    INSTANCE ,
    IP_ADDRESS ,
    ISDBA ,
    LANG ,
    LANGUAGE ,
    NETWORK_PROTOCOL ,
    NLS_CALENDAR ,
    NLS_CURRENCY ,
    NLS_DATE_FORMAT ,
    NLS_DATE_LANGUAGE ,
    NLS_SORT ,
    NLS_TERRITORY ,
    OS_USER ,
    PROXY_USER ,
    PROXY_USERID ,
    SESSION_USER ,
    SESSION_USERID ,
    SESSIONID ,
    TERMINAL
    ) AS SELECT
    SYS_CONTEXT ('USERENV', 'AUDITED_CURSORID') ,
    SYS_CONTEXT ('USERENV', 'AUTHENTICATION_DATA') ,
    SYS_CONTEXT ('USERENV', 'AUTHENTICATION_TYPE') ,
    SYS_CONTEXT ('USERENV', 'BG_JOB_ID') ,
    SYS_CONTEXT ('USERENV', 'CLIENT_IDENTIFIER') ,
    SYS_CONTEXT ('USERENV', 'CLIENT_INFO') ,
    SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMA') ,
    SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMAID') ,
    SYS_CONTEXT ('USERENV', 'CURRENT_SQL') ,
    SYS_CONTEXT ('USERENV', 'CURRENT_USER') ,
    SYS_CONTEXT ('USERENV', 'CURRENT_USERID') ,
    SYS_CONTEXT ('USERENV', 'DB_DOMAIN') ,
    SYS_CONTEXT ('USERENV', 'DB_NAME') ,
    SYS_CONTEXT ('USERENV', 'ENTRYID') ,
    SYS_CONTEXT ('USERENV', 'EXTERNAL_NAME') ,
    SYS_CONTEXT ('USERENV', 'FG_JOB_ID') ,
    SYS_CONTEXT ('USERENV', 'GLOBAL_CONTEXT_MEMORY') ,
    SYS_CONTEXT ('USERENV', 'HOST') ,
    SYS_CONTEXT ('USERENV', 'INSTANCE') ,
    SYS_CONTEXT ('USERENV', 'IP_ADDRESS') ,
    SYS_CONTEXT ('USERENV', 'ISDBA') ,
    SYS_CONTEXT ('USERENV', 'LANG') ,
    SYS_CONTEXT ('USERENV', 'LANGUAGE') ,
    SYS_CONTEXT ('USERENV', 'NETWORK_PROTOCOL') ,
    SYS_CONTEXT ('USERENV', 'NLS_CALENDAR') ,
    SYS_CONTEXT ('USERENV', 'NLS_CURRENCY') ,
    SYS_CONTEXT ('USERENV', 'NLS_DATE_FORMAT') ,
    SYS_CONTEXT ('USERENV', 'NLS_DATE_LANGUAGE') ,
    SYS_CONTEXT ('USERENV', 'NLS_SORT') ,
    SYS_CONTEXT ('USERENV', 'NLS_TERRITORY') ,
    SYS_CONTEXT ('USERENV', 'OS_USER') ,
    SYS_CONTEXT ('USERENV', 'PROXY_USER') ,
    SYS_CONTEXT ('USERENV', 'PROXY_USERID') ,
    SYS_CONTEXT ('USERENV', 'SESSION_USER') ,
    SYS_CONTEXT ('USERENV', 'SESSION_USERID') ,
    SYS_CONTEXT ('USERENV', 'SESSIONID') ,
    SYS_CONTEXT ('USERENV', 'TERMINAL')
    from dual;

  • How to get the information of various components in a webpage

    I am getting the Document object of the webpage using JRex.
    When I hit any site eg. www.yahoo.com then JRex returns the Document object of the corresponding document. Now I want to retrieve the information of various components of that webpage.
    Eg. button tag is there on the page. For different webpages it can be at different place in the pages. So how can I get the information of different different components on the page..
    Please guide me in this as I dont have any idea regarding this.

    I am getting the Document object of the webpage using JRex.
    When I hit any site eg. www.yahoo.com then JRex returns the Document object of the corresponding document. Now I want to retrieve the information of various components of that webpage.
    Eg. button tag is there on the page. For different webpages it can be at different place in the pages. So how can I get the information of different different components on the page..
    Please guide me in this as I dont have any idea regarding this.

  • HT1373 i have a broken desktop which had my itunes account on it. I am trying to get the information onto a new laptop and itunes programme but cannot. I also cannot get my iphone 5 to be recognized on the new itunes. HELP

    i have a broken desktop which had my itunes account on it.
    I am trying to get the information onto a new laptop and itunes programme but cannot. I have only managed to copy over some of my music as i had it on an external drive.
    I also cannot get my iphone 5 to be recognized on the new itunes.
    HELP

    iTunes as you see it in the application window uses a series of files and folders contained in the iTunes folder.  Some people make the mistake of only backing up their media in which case all you have is a bunch of media files without the iTunes structure.  In that case you have to build a new library yourself.
    What exactly do you mean "not recognized"?  The phone does not show up on the computer at all, or it does but it says it will wipe the phone?  The wipe the phone stuff is again because it cannot find the original library to which it was synced.  You need to transfer the entire iTunes folder from the old computer or the backup you made of it.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • How to get the information of index?

    Hi all,
    I am a new InDesign developer. I want to know how can I get the information of the index places in the document, including all entries and styles. Or, how can I traverse the index tree on index panel.
    Thank you very much.

    Sorry, I forgot the point that I am using CS4.

  • How to get the information of the log related to t.code generated by basis.

    In the log generated by the basis personnel we found the details of user and corresponding t.code used details.  How to get the information reg. which document he went into using this t.code? For example me29 t.code used by 'x' user.  The log is showing time date t.code and user.  By using me29n which document he attended is the requirement. How to get this information. Let me know it pl.
    TS

    Thanks all for the help.
    Here is my solution. A mix from Julian and Thomas.
    In future I will encapsulate the code in a function module.
    DATA: BEGIN OF usr_tabl OCCURS 10.
            INCLUDE STRUCTURE uinfo.
    DATA: END OF usr_tabl.
    DATA: th_opcode(1) TYPE x.
    DATA: LV_TID LIKE  SY-INDEX.
    CONSTANTS: opcode_list LIKE th_opcode VALUE 2.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
      ID 'TAB' FIELD usr_tabl-sys.
    CALL FUNCTION 'TH_USER_INFO'
      EXPORTING
        CLIENT = sy-mandt
        USER   = sy-uname
      IMPORTING
        TID    = LV_TID.
    read table usr_tabl with key tid = lv_tid.
    IF sy-subrc = 0.
      CASE usr_tabl-type.
        WHEN 2.
          write :/ usr_tabl-type, 'SYSTEM'." (system)
        WHEN 4.
          write :/ usr_tabl-type, 'GUI'." (Gui)
        WHEN 32.
          write :/ usr_tabl-type, 'RFC'."(RFC)
        WHEN 202.
          write :/ usr_tabl-type, 'PLUG-IN'." (Plug-in &).
      endcase.
    ENDIF.

Maybe you are looking for

  • Adobe Flash Player "upgrade" is NOT working/upgrading....

    I have :  HP laptop, new less than 6 months; Windows 7; IE; and according to my Programs List, I have the 'current version' of Adobe Flash Player installed.......yet, when I try to view a video on youtube, or play a game through Facebook, it shows I

  • Can no longer sort RAW with JPG files together by capture date.

    Suddenly I can no longer sort  JPG and RAW files together by capture date. I have two Canon SLR's shooting in RAW and one Canon point an shoot shooting in JPG and want to collate the photos in LR4, which I was able to do up to now. I cannot find out

  • Java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[

    HI, I am trying to monitor multiple weblogic servers, I am getting the exception when the program is trying to read multiple domains of the same weblogic server version 8.1. Can any one help me in getting this fix programatically using weblogic.manag

  • International calls. iPhone 4

    Hi. What did I not do? Just got back from Costa Rica- had checked with AT&T and was assured iPhone 4 would work there ( if I needed to make calls). No such luck. Phone detected the cellular network but still showed "no service". Is this a sim card is

  • Regarding Background pictures  Display

    hi Experts.....   i want  to diaplay  the background image  is very very dim....(light  appearence..) hw can i   upload the image   iun SE78.. i am facing  problems    are.. i am uploading image in bitmap format... if fedure is 100%    the  image app