HTMLClient/UserCode table.lsml.js Created code VS. Server table.lsml.cs Created code?

Is there a precedence order between these to sets of Created functions (Server _Created, then HTMLClient .created)?
Do I need both types of Created functions? Or is that just duplicating code to inits in both?
Thanks.

Hi KMHaynes,
For this issue, you need understand how Lightswitch works in presentation layer and logic layer. See:
LightSwitch Presentation Layer
LightSwitch Logic layer
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Item cannot be found in the collection corresponding to the requested name or ordinal.

Hi,
I am using Dreamweavers User Authentication tool, and all seems to be working except when I press the 'Submit' button I get the following error;
ADODB.Fields error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
/coding/test_login.asp, line 35
As far as I can tell the user login works, as I can assess the restricted page, if I manually type in the URL.
My code is listed below;
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
' *** Validate request to log in to this site.
MM_LoginAction = Request.ServerVariables("URL")
If Request.QueryString <> "" Then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode(Request.QueryString)
MM_valUsername = CStr(Request.Form("usercode"))
If MM_valUsername <> "" Then
Dim MM_fldUserAuthorization
Dim MM_redirectLoginSuccess
Dim MM_redirectLoginFailed
Dim MM_loginSQL
Dim MM_rsUser
Dim MM_rsUser_cmd
MM_fldUserAuthorization = """group"""
MM_redirectLoginSuccess = "yes.asp"
MM_redirectLoginFailed = "no_access.asp"
MM_loginSQL = "SELECT usercode, epros_password"
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & " FROM DBA.[user] WHERE usercode = ? AND epros_password = ?"
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd.ActiveConnection = MM_Conn_PSCRM_Demo_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param2", 200, 1, 255, Request.Form("password")) ' adVarChar
MM_rsUser_cmd.Prepared = true
Set MM_rsUser = MM_rsUser_cmd.Execute
If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
    ' username and password match - this is a valid user
    Session("MM_Username") = MM_valUsername
    If (MM_fldUserAuthorization <> "") Then
      Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
    Else
      Session("MM_UserAuthorization") = ""
    End If
    if CStr(Request.QueryString("accessdenied")) <> "" And true Then
      MM_redirectLoginSuccess = Request.QueryString("accessdenied")
    End If
    MM_rsUser.Close
    Response.Redirect(MM_redirectLoginSuccess)
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginFailed)
End If
%>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<form action="<%=MM_LoginAction%>" method="POST" name="logon">
<input name="usercode" type="text"><br>
<input name="password" type="text">
<input type="submit" name="Submit" id="Submit" value="Submit">
</form>
</body>
</html>
Any help greatly accepted.

There are several workarounds you could use. I would start by setting the local variable back to the actual column name
MM_fldUserAuthorization = "group"
and then modify the reserved word directly SQL. See if this works:
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & """MM_fldUserAuthorization"""
If that line doesn't work, then you might need to concatenate the quotes around the variable, or try a combination of single/double quotes.
Also be warned that once you modify DW's generated code, you probably will not be able to maintain the code in DW server behavior wizard. You'll need to maintain by hand.
Good luck.

Trying to compare 2 strings using sql...should be an easy one

I have a String variable named 'code' that = "xyz". I have "xyz" in my DB under the userCodes column. And I have the following in my Java code:
String query = "SELECT userCodes FROM accounts";
ResultSet rs = stmt.executeQuery(query);
while (rs.next()) {
thisCode = rs.getString("userCodes");
if (thisCode == code) { System.out.println("ITS THE SAME CODE"); }The problem is that Java is not recognizing thisCode as being equal to code, when they clearly are equal. Could someone please tell me why the two strings are not equal?
Thanks.

Since strings are objects you have to use equals metho to test the equality of the strings.
Or in sql you can do this by adding a where clause
PreparedStatement ps = connection.prepareStatement("SELECT userCode FROM accounts WHERE userCode=?");
ps.setString(1,code);
ResultSet rs = ps.executeQuery();
...

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create a table in the file using java code.?

HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
Phani

Hi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,

Create Table Code Error in C#

Hi All
When I try to add a class for creating tables in C# (Code as given in Sampls), it gives error like below
The name 'globals_Renamed' does not exist in the current context.
Sud i add some reference, if yes what all ?
please help

When I ran the code for creating user tables in samples C# i got
Object reference not set to an instance of an objec
oUserTablesMD = ( ( SAPbobsCOM.UserTablesMD )( oCompany.GetBusinessObject( SAPbobsCOM.BoObjectTypes.oUserTables ) ) )
in the above line

Using abap code data from internal table to XML file create

Hi ALL,
i am using methods
L_VALUE = GS_DOCUMENT-U_MITARBEITER.
L_RC = L_ELEMENT_FLIGHTS->SET_ATTRIBUTE( NAME = 'U_Mitarbeiter' VALUE = L_VALUE ).
CLEAR: L_VALUE,
         L_RC.
L_VALUE = GS_DOCUMENT-VORNAME .
L_RC = L_ELEMENT_FLIGHTS->SET_ATTRIBUTE( NAME = 'Vorname' VALUE = L_VALUE ).
     ENDLOOP.
LOOP AT GS_DOCUMENT-GI_TIMETABLE INTO GS_TIMETABLE.
    L_ELEMENT_AIRLINE = L_DOCUMENT->CREATE_SIMPLE_ELEMENT(
        NAME = 'Timetable'
        PARENT = L_ELEMENT_FLIGHTS ).
      Create attribute 'code' of node 'airline'
    L_VALUE = GS_TIMETABLE-BEGINNUHRZEIT.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Beginnuhrzeit' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-BEMERKUNGEN.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Bemerkungen' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-ENDEUHRZEIT .
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Endeuhrzeit' VALUE = L_VALUE ).
    L_VALUE = GS_TIMETABLE-BUCHUNGSDATUM.
    L_RC = L_ELEMENT_AIRLINE->SET_ATTRIBUTE( NAME = 'Buchungsdatum' VALUE = L_VALUE ).
ENDLOOP.
Creating a stream factory
L_STREAMFACTORY = L_IXML->CREATE_STREAM_FACTORY( ).
Connect internal XML table to stream factory
L_OSTREAM = L_STREAMFACTORY->CREATE_OSTREAM_ITABLE( TABLE = L_XML_TABLE ).
Rendering the document
L_RENDERER = L_IXML->CREATE_RENDERER( OSTREAM = L_OSTREAM
                                        DOCUMENT = L_DOCUMENT ).
L_RC = L_RENDERER->RENDER( ).
Saving the XML document
L_XML_SIZE = L_OSTREAM->GET_NUM_WRITTEN_RAW( ).
i am geting the output,
line1
<?xml version="1.0"?><Head Document="002_TMA1_KW1_SAP.XML" Innenauftragsnummer="008004000800" Kalenderwoche="17" MonatJahr="04/2008" Name="" Personalnummer="91003139" Projektnummer="1400000700" Regionalstelle="B" U_Entleiher="1" U_Mitarbeiter="1" Vorname=
line 2
Ricky"><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="21.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="22.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrz
line 3
it="16:30" Buchungsdatum="23.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="24.04.2008"/><Timetable Beginnuhrzeit="08:00" Bemerkungen="" Endeuhrzeit="16:30" Buchungsdatum="25.04.2008"/></Head>
but i want this type line by line
<?xml version="1.0" encoding="ISO-8859-1"?>
<Document Dokumentnummer="001_TMA7_KW2_MAN" Dokumenttyp="TN_HE" Innenauftragsnummer="8004750104" Kalenderwoche="15" MonatJahr="04/2008" Name="Banana" Personalnummer="166326" Projektnummer="1400000203" Regionalstelle="RV1" U_Entleiher="1" U_Mitarbeiter="1" Vorname="Sepp">
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="07.04.2008" Endeuhrzeit="16:00"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="08.04.2008" Endeuhrzeit="16:00"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="09.04.2008" Endeuhrzeit="16:30"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="10.04.2008" Endeuhrzeit="16:30"/>
<TimeTable Beginnuhrzeit="08:00" Bemerkungen="" Buchungsdatum="11.04.2008" Endeuhrzeit=""/>
</Document>
for line breaking, please give me solution
Regards,
Santha

Hi,
Please give me more inforamtion, how to use this
CLASS cl_abap_char_utilities DEFINITION LOAD.
cl_abap_char_utilities=>newline
Regards,
Santha

Creation of transaction code for the table created

Hi Experts,
Can any one help me out with the steps that are used for creation of transaction for the table using the transaction SE93, i have created the table maintance generator.

Hi
Check TSTCP table for the existing t-codes and for creating check this link
Re: Transaction Code Creation for a Table/View
Regards
Pavan

TABLE FOR TAX CODE and amount break up when PO created

Hi,
Could you please tell us the table which stores the amount break up for a condiion type based on tax code when a Purchase Order is created.
Like :
When the amount (kwert) for a condition type(kschl) is 100.
Based on tax code(mwskz) and condtion type(kschl) the amount will break up
into some 60 and 40 .So this break up amount will store in some tables.
we have tried KONV .
where only 100 is stored

Hi
Pass the MWSKZ, KSCHL and ALAND fields to the table A003 table, if not A003 some A* table check that.
take the KNUMH field from it.
pass this field to KONP table along with KSCHL codn type field
You will get the condition type based amount fields from KONP (KWERT field)
Reward points if useful
Regards
Anji

Javascript code to enable an ADD button to create duplicate tables and pages for multiple entries

I am using Adobe XI Pro. I have created a multi-page fillable pdf questionnaire that I want to make interactive to the user. Within each page, I have multiple tables that can have ADD buttons to duplicate the table if the client wants more than one test. I would like this table to insert directly below the previous table and they may be able to add upto 5 of these table.
I also have a couple pages in the questionnaire that require duplication for multiple samples. Eg. One page per sample, and I may have upto 10 samples. I would like the javascript to have an ADD button and then add each page behind the previous related sheet (Original and duplicates together)
I am not a javascript coder so I would need some examples and a walk through. I did take some developer courses in engineering but it has been almost two decades
I have search on several forums and cannot find a good resource so I appreciate the help.
Sincerely
Tara

Some of what you want to do can be done using template features and a bit of JavaScript, but if your users will be using Reader, version 11 will be required. You can dynamically add new pages, but adding new tables to existing pages with reflow of content that comes after is not possible with a form created in Acrobat. If you have access to Adobe's LiveCycle Designer form creation software, you can create what's known as a dynamic XFA form that can do all of what you want. You can ask in the LiveCycle Designer forum for more information: http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es?view=discussions

Thru code how to create a context node n context attribute for a table

Hi Friends....i need some clarification...according to my requirement i need 2 create contx node n ctx attribute for a table..i.e through the code(implemention NWDS) means this has 2 b done in dynamically...
More clearly according to the structure of a table in MySql DB the same table structure has 2 b designe in my view ..suppose my table(MySql) have 20 col's(name,dept,desig..) n 300 recoreds ..i hav to show that structure in view.
waiting for reply..frndzzzzzzzz

Hi Rajeshkelam,
Take a Value Node say "Employee".
Create 20 Value attributes (name, dept, desig..) under the Value Node(Employee).
Then Create a Dynamic Table using the "Employee" Value Node.
check this threads.
Dynamic table creation
Dynamic Table
Regards,
Mithu

Creating UDO through code with 1 Docment table & 4 Document Line Tables

Hi,
I need to create one Document table and four Document Line tables(child tables) and make them UDO through code. This process is working When I am creating UDO with one Document table and one Document Line table but if I add more than one Child table it is taking only one child.... Can anyone give me some solution or code example related to this problem this problem?
Regards,
Sudeshna.

Hi,
Firstly Trinidad, unfortunately I could not open that link.
And secondly, the following is my code... Through this code I am trying to create an UDO with one document table and two document line tables.... here the UDO is being created but it is not taking two line table, its taking only one Document line table.... how can I create udo with more than one Document line tables?
Dim oUserObjectMD As SAPbobsCOM.UserObjectsMD
oUserObjectMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserObjectsMD)
oUserObjectMD.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.CanLog = SAPbobsCOM.BoYesNoEnum.tNO
oUserObjectMD.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tYES
oUserObjectMD.ChildTables.TableName = "childSplitNew1"
oUserObjectMD.ChildTables.TableName = "childSplitNew2"
oUserObjectMD.Code = "udoSplitNew"
oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tNO
oUserObjectMD.Name = "udoSplitNew"
oUserObjectMD.ObjectType = SAPbobsCOM.BoUDOObjType.boud_Document
oUserObjectMD.TableName = "masterSplitNew"
lRetCode = oUserObjectMD.Add()
Regards,
Sudeshna.

How to create ForeignKey reference to code-first identity tables.

Hi,
I'm developing a web application using MVC 5, EntityFramework 6 with a Code-First approach.
I have successfully created my tables dbo.AspNetRoles, dbo.AspNetUsers... etc, also I have created some custom tables for example a table that must have a relationship between the menus presented and the role of the authenticated user. What I want to add
to my model is a property like this:
[ForeignKey]public virtual AspNetRoles Roles { get; set; }
But of course I have not an AspNetRoles class, because the framework auto generates the tables only in the SQL database, so my question is, I have to manually create this classes? How can I link them to the database tables, I think the issue may be deeper.
If I can't do this maybe I should go back to SQL manual queries.
Thanks!

Hello Morral,
>> What I want to add to my model is a property like this:
If you have a separate model to store your own business model, what you have written should be almost ok, however, please take care the [ForeignKey] attribute is usually used to markup a property as an integer property to specify it as a foreign key:
public virtual int RoleID { get; set; } [ForeignKey("RoleID")]
public virtual AspNetRoles Roles { get; set; }
Or it would generated a combinatorial name.
>> But of course I have not an AspNetRoles class, because the framework auto generates the tables only in the SQL database, so my question is, I have to manually create this classes?
From your description, the AspNetRoles class seems to be a system class which is not exposed to user. If so, these classes already exists, you do not need to create them again.
I notice that you are working with the MVC project, you could also ask this issue to the MVC forum:
http://forums.asp.net/1146.aspx
There are MVC experts will help you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HTMLClient/UserCode table.lsml.js Created code VS. Server table.lsml.cs Created code?

Similar Messages

Maybe you are looking for