HTP Package and Oracle XE

Hello Experts,
I have just installed Oracle10g XE. I wanted to create package/procedure using Oracle HTP package. Would it be possible to use HTP package in XE. If so then how can I call that in browser? (Say package name is my_package_k and procedure id my_proc_p). I do not know what http://???? I have to use??
Please help me.
Thanks,
B Adhvaryu
London
UK

I'm running XE on an Asus 1000H eee netbook and all works fine. I installed 2GB though which is straighforward and relatively inexpensive to do, and also doesn't invalidate the warranty.
PaulB

Similar Messages

Problem with oralce supplied packages and views

Hi All,
How to handle oracle suppiled packages like DBMS_SCHEDULER,DBMS_PIPE,dbms_application_info inTimesten.
i have procedures using thease procedures packages and oracle specific views like v$instance and v$database etc
how to make thease pL/SQL blocks compatible with Timesten
Kindly help me

in this query m getting both the result as well as no data found...but i want either reuslt or no data found/
set serveroutput on
declare
cursor emp_cursor is select employee_id, last_name from employees where employee_id =100;
erec emp_cursor%rowtype;
begin
----for emp_record in emp_cursor
open emp_cursor;
loop
fetch emp_cursor into erec;
dbms_output.put_line(erec.employee_id||' '||erec.last_name);
exit when emp_cursor%notfound;
end loop;
if emp_cursor%notfound
then
raise no_data_found;
end if;
exception
when no_data_found then
dbms_output.put_line('no data found');
close emp_cursor;
end;
Edited by: 845946 on Mar 31, 2011 1:50 AM

Sending Binary Data using HTP package

Has anyone been successful in using the HTP package and its PUTRAW procedure to send binary data to a browser?
Example code shows basic idea:
create or replace
procedure test_raw as
output VARCHAR2(20);
begin
OWA_UTIL.MIME_HEADER('application/x-gzip', TRUE);
output := 'Hello World!';
HTP.PUTRAW(UTL_RAW.CAST_TO_RAW(output));
HTP.FLUSH;
end test_raw;
I receive an empty file when called from the browser.
What gives?

I found my answer. I should be using wpg_docload.download_file(BLOB) to "download" a the contents of a BLOB.

Server side includes with htp package

I have a few procedures that call the htp package and generate dynamic web pages, however the server side includes are being treated as comments; they are not interpreted correctly and hence are not reading the associated file.
Has anyone encountered this before and found a solution?

I have a few procedures that call the htp package and generate dynamic web pages, however the server side includes are being treated as comments; they are not interpreted correctly and hence are not reading the associated file.
Has anyone encountered this before and found a solution?

Problem with Linus Ubuntu 7.04 and Oracle-Xe debian package

Hi all,
Installed Oracle 10g XE on my Ubuntu 7.04 using universal Debian Package : oracle-xe-universal_10.2.0.1-1.0_i386.deb. No problem during the installation . After finished the installation, I configured the database to use port 6000 and its password (Listener port set to default).
But when I tried to access the database home page using "http://127.0.0.1:6000/apex", it cannot be accessed. Then I tried to verify my database server using /etc/init.d/oracle-xe status and here's the output:(before it, I make user the database was realy online by typing /etc/init.d/oracle-xe start)
###########################333###
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-AUG-2007 22:45:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=wks-082)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 110: Connection timed out
then I tried to open the log in /usr/lib/oracle/xe/app/oracle/admin/xe/bdump/alert_XE.log and here is the output
Thu Aug 9 14:54:14 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:27 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:33 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7532.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7532
Thu Aug 9 14:54:35 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:46 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7551.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7551
Thu Aug 9 14:54:53 2007
Are there anyone who can help me? I really have no idea since I'm a newbie here, both linux and oracle. Any hint are welcome, thanks in advance.
Regards,
Rudi Sadria

Thx for the help, I already verify the /etc/hosts and these are the output:
127.0.0.1 localhost
127.0.0.1 wks-082
127.0.0.1 localhost.localdomain localhost localhost.domain
127.0.0.1 hostname hostname.domain
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
I check the listener status and here's the output:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 10-AUG-2007 15:14:45
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 10-AUG-2007 15:14:39
Uptime 0 days 0 hr. 0 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=wks-082)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
and here's the alert_XE.log
Fri Aug 10 15:30:59 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 41943040
__large_pool_size = 0
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 96468992
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
PMON started with pid=2, OS id=7328
PSP0 started with pid=3, OS id=7330
MMAN started with pid=4, OS id=7332
DBW0 started with pid=5, OS id=7334
LGWR started with pid=6, OS id=7336
CKPT started with pid=7, OS id=7338
SMON started with pid=8, OS id=7340
RECO started with pid=9, OS id=7342
CJQ0 started with pid=10, OS id=7344
MMON started with pid=11, OS id=7348
MMNL started with pid=12, OS id=7350
Fri Aug 10 15:31:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Aug 10 15:31:01 2007
ALTER DATABASE MOUNT
Fri Aug 10 15:31:01 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Aug 10 15:31:01 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
and then I open the SQL* plus and type some command
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 10 15:32:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> select status from v$instance
2 ;
STATUS
STARTED
But I'm still cannot accessed my "http://localhost:6000/apex". Are there any possibilities that my browser block it? or I need to change the port?
Thx a lot for your help
Regards,
Rudi Sadria

Pros and cons of using email sending package in oracle 8.1.6

hi ,
i would like to know the advantages /disadvantages of using email sending package from oracle 8.1.6
compared to sending the same using say perl or php.
iam developing a site in php/oracle8.1.6 , in which iam supposed to create a payement module.whenever a user
register(for free trial or subscribing the site) i'll have to send him a welcoming mail.In addition to this iam also supposed to find out wether subscribers are paying cash at right time and if not send them reminder mails and other for related scenarios . i can do the same in Perl or PHP.but if iam not gaining much(say based on server performance or load) then i think i can go ahead with oracle package. when i tested it i found that its slow . what about the load that it may cause for the server (ours is linux ).
please do give inputs on this

Hi Ravi,
Thanks for your reply.
But I am specifically looking at pros and cons for web services. So the thread which you passed to me won't help.
Regards
Nitin.

Using the Auth pear package with php 4 and oracle

Hi all.
I was wondering if anybody out there has had any success (or else) using the Auth Pear package with php 4 and Oracle.
I'm trying to do just that but can't get it to work.
I've found lots of examples on the web for mysql but none for oracle...
Feedback on your experiences with this would be most appreciated.
Thanks in advance.
Rob

Hi cj.
Thanks for your advice. I came across those documents but discarded them as they didn't deal with the Auth pear package I was intending on using. I didn't want to look at other alternatives as the focus of my project was primarily on migrating existing data from a mysql setup to an oracle setup. And quickly.
I hadn't found any documentation out there on using Auth with Oracle. All examples available on the web were mysql specific.
I eventually got round to gutting the code from the package and finding the fix to my problem.
Just for info, Auth expects by default an auth table containing two fields username and password. That's lowercase table and field names.
If the table name or field names to be used differ from these then they must be explicitly defined when calling Auth. Doing so resolved my problem.
My mysql db had all lowercase naming, while my oracle db has all uppercase naming throughout.
It is important to note that the Auth package uses the table and field names quoted, thus referring to the table and fields in a case sensitive way.
So for an uppercase table and fields setup the call has to be :
$options = array(
    'dsn' => "$dsn_for_my_oracledb",
    'table' => 'AUTH',
    'usernamecol' => 'USERNAME',
    'passwordcol' => 'PASSWORD',
    'db_fields' => '*',
$a = new Auth("DB", $options , "loginFunction");I hope this helps anybody trying to use this package with oracle. It worked great for me.
Pear Auth package documentation:
http://www.pear.php.net/manual/en/package.authentication.auth.intro.php
Regards,
Robert

JDeveloper and Oracle Software Packager

Is there any integration between JDeveloper 3.2 and Oracle Software Packager.
If not are there any standard 'Best Practices' for generating builds from JDeveloper in structures that can be used by OSP/OUI.
null

Please provide enough information for us to know what you are trying to do and with what version.
You could be asking about anything from the box the software comes in (if it did) to built-in PL/SQL packages and we should not have to guess at your meaning.

Need ant script to compile, package, and deploy to Oracle AS 10.3.1

I have a test app with ADF faces/jsf for front-end and EJB 3.0 Session Facade/Entity beans for back-end. The project structure/layout is similar to the SRDEMO app in JDeveloper. I was able to compile, package, and deploy within JDeveloper 10g to Oracle AS 10g successfully. Is there a sample ant script to compile, package, and deploy to Oracle AS 10g that I can run from command line? The build.xml that came with SRDEMO only do the compilation, not packaging and deployment. I was able to modify the SRDEMO's build.xml to compile my test app though. I still need the script to package and deploy it.
Thanks,

Hi,
How are you referring to the class path. I have created my custom build file and I refer like this.
<path id="classpath">
<pathelement location="${oracle.home}/lib/aia.jar"/>
<pathelement location="${oracle.common.home}/modules/org.apache.commons.logging_1.0.4.jar"/>
</path> oracle.home is the location where my aia.jar resides.
In the compile-classes target I have

<target name="compile-classes">
<mkdir dir="${sca-inf.classes.dir}"/>
<javac destdir="${sca-inf.classes.dir}"   classpathref="classpath"
         debug="on"                         nowarn="${javac.nowarn}"
         deprecation="${javac.deprecation}" encoding="Cp1252"
         source="1.6"                       target="1.6">
    <src path="${src.dir}"/>
</javac>
</target> Regards,
Neeraj Sehgal

HTP package question

I have a feeling I'm in the wrong place for this question but maybe someone can help.
I'm not so good with Oracle configuration and setup issues but I have created a package with a few procedures that output info using the HTP package. At my old place of employment we had a web server set up and we could use
http://ouraddress.com/packagename.procedurename?p_param1=123&p_param2=456
We have a web-based application server set up for Oracle Forms (eBusiness Suite) but I don't know if I'm able to do something like this or not. Where/what do I need to set up to use this type of functionality?
null

PL/SQL Web Development Tools: Oracle Database provides built-in tools and technologies that enable you to deploy PL/SQL applications over the Web. Thus, PL/SQL serves as an alternative to Web application frameworks such as CGI.
The PL/SQL Web Toolkit is a set of PL/SQL packages that you can use to develop stored procedures that can be invoked by a Web client. The PL/SQL Gateway enables an HTTP client to invoke a PL/SQL stored procedure through mod_plsql, which is a plug-in to Oracle HTTP Server. This module performs the following actions:
- Translates a URL passed by a browser client
- Calls an Oracle Database stored procedure with the parameters in the URL
- Returns output (typically HTML) to the client
You got to start from here:
Developing Applications with the PL/SQL Web Toolkit
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_web.htm#g1026380

Reading html data & uploading a file in single html form using htp package

Hi
I have designed a html screen using htp package in which i have few text items and file upload button. I have to validate all forms data like text items and check box elements and upload file to unix. I am using java script for file validations and cgi script to upload file. With this I am able to either read form data or upload file but not both.
At a time I want to insert a record to database with html form values and upload file to unix with htp package. Please suggest how can I read html form data + uploading a file to unix simultaneously in a single htp procedure.
Thanks,
Pradeep

Have you ever considered using Application Express (APEX)?
Oracle Application Express (APEX)
Sounds like you're going the long way around to create a web based application.

How to incorporate Javscript into oralce htp packages?

hello,
I would like to know about the javascript how one can use in oracle HTP packages while creating the forms using HTP packages... are there any course offered by oracle or is there any documentation available on this? on i know the htp package are there but how one can use javascript in htp packages...
Please do help me out...
Thanks a lot.......

Application Developer's Guide - Fundamentals Contents / Search / Index / PDF
Chapter 18 Page 679
http://download-east.oracle.com/docs/cd/B10501_01/appdev.920/a96590.pdf
You can enter too javacript code inside a Stored Procedure and use so:
Example:
<HTML>
<HEAD>
<TITLE>Metalink 2.0</TITLE>
</HEAD>
<FRAMESET COLS="152, *" NORESIZE BORDER="0" FRAMESPACE="0"
FRAMESPACING="0" FRAMEBORDER="NO">
<FRAME SRC="ml2_gui.checkJavascript?p_section_id=-1" SCROLLING="NO" SCROLLING="NO" MARGINWIDTH="0" MARGINHEIGHT="0" NAME="navbar">
<FRAMESET ROWS="61,*" BORDER="0" FRAMESPACE="0" FRAMESPACING="0" FRAMEBORDER="NO" NAME="rightframe">
<FRAME SRC="ml2_gui.queryform"SCROLLING="NO" NORESIZE MARGINWIDTH="0" MARGINHEIGHT=0 BORDER="0" NAME="query">
<FRAME SRC="per_hom.startup" SCROLLING="AUTO" NORESIZE MARGINWIDTH="0" MARGINHEIGHT="0" BORDER="0" NAME="corner">
</FRAMESET>
</FRAMESET>
Joel P�rez

Problem with installing Oracle UI and Oracle SP (ouiosp220160.jar)

Hello,
I have downloaded the installation file for Oracle Universal Installer and Oracle Software Packager which is in the form of a jar file:
ouiosp220160.jar.
WhenI try to extract it, the JVM says that the jar file is a corrupt one.
So, I downloaded it again and still it is a corrupted one.
What to do now? Is it in the corrupt form on the site or I am missing something?
Any other mirror site?
Please help.
-Sameer

Yes use a different ORACLE_HOME's for the Database,
The Application Server (Needs 2 Oracle Homes if you are installing it on one server) and the developer suite - I would expect to see this more on a client PC than a server but if you are trying everything out on say a windows box then that also needs its own HOME.
Have fun.

How to call a package in Oracle

I'm trying to call a package in oracle
(this is the oracle way of calling it :
begin pck$xl.get_year_low_high_to_date(:compid, 20010801 , 20020108 ",:year_low,:year_high,:year_average,:low_date,:high_date); end;)
but i can't get it right.
I'm new to package calling in Oracle from Java, till now i only worked with SQL statements without parameters of that kind, can someone help me with this?
ps the ":compid" is a parameter i have to fill in and provide...
thank you very much

ok here is a test i do...
but still doesn't work something about the bindvariables (check errorlog). I know a bit jdbc and i understant what you mean, but the problem is i don't know how this should go :(
please advise
import java.sql.*;
import java.util.*;
import java.text.*;
import java.io.*;
* @author U97488
public class test {
    public static void main(String[] args) {
        try{
            ConnectionSherpa cs = ConnectionSherpa.getInstance("ConnectionSherpa");
            Connection conn = cs.getConnObj();
            String sSQL = "begin?; pck$xl.get_year_low_high_to_date(?, 20010801, 20020801 ,:year_low,:year_high,:year_average,:low_date,:high_date); end;";
            CallableStatement stmt = conn.prepareCall(sSQL);
            stmt.setString(1, "BRU10");
            System.out.println(stmt.toString());
            if(stmt.execute(sSQL)){
                System.out.println(stmt.getString(2));
        }catch (Exception e){
            e.printStackTrace();
}StackTrace:
java.sql.SQLException: ORA-06550: Regel 1, kolom 6:
PLS-00110: Bindvariabele '1' is niet toegestaan in deze context..
        at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
        at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
        at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
        at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
        at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
        at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1839)
        at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1764)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2354)
        at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:909)
        at com.kbcsecurities.taminoupdate.servlets.test.main(test.java:28)

How call procedure or package from Oracle BI Publisher 10.1.3.2.1

Hi Gurus,
I need to call a procedure or package from Oracle BI Publisher 10.1.3.2.1 by passing parameters, I do it because it would be easier to fill a table as the report that asks for is too complex (8 breaks, 5 dblinks, 20 tables, etc).
I'm not using the Oracle XML. Review include the following solutions:
Re: Stored procedures and dynamic columns
Re: Is it possible to use Stored Procedures in BI Publisher GUI?
Re: PL/SQL Stored Procedure w/ XML Template?
But none of them useful for me was the level of complexity.
Best regards.

Hi Vetsrini,
I write the sentence as it showed in the previous thread
select from whc_kk_v2.whc_p_kk_publisher (pv_msgerror =>: msgerror,*
pv_pro1 =>: prov_1,
pv_pro2 =>: prov_2)
run when I get the error BIP
ORA-00933: SQL command not properly ended
Show me I'm doing wrong, or who may be causing the error. I tried everything but does not leave, please your help.
Best regards

HTP Package and Oracle XE

Similar Messages

Maybe you are looking for