HTTP Adaptor

Hi all,
I knw dat reciever idoc adaptor supports aknowledgement
even when not requested by sender . Doest it applies
for HTTP adaptor also.
Regards,
Pooja

Hi,
By default http adapter does not support any acknowledgement.but you can get i,e http 200 response. ie It is kind of status/technical ack.
But if you want application acknowledgment , you need to go for Synchrnous call.
Regards,
Moorthy

Similar Messages

Http adaptor on which factors we will use

hi
1.pls details about http adaptor scenario ,on which buiseness criteria we have to consider?
2.difference between business system and business service in ID,
3.file to idoc scinario using BPMs.
thanks & regards

1) pls details about http adaptor scenario ,on which buiseness criteria we have to consider?
If you are interacting with a HTTP server then http adapter comes into picture.
difference between business system and business service in ID
Business System
1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
Business Service
1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
4.Business Service has no SLD Entries and No Assigned Products and SWCV's
<b>3.file to idoc scenario using BPMs.</b>
File to Multiple IDocs (XSLT Mapping)
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

HTTP Adaptor for RESTful service calls -- Proxy Settings?

Hi Guys,
I have successfully configured an HTTP Adaptor on my Access Server, imported a REST service function, set up DTDs etc etc all ok.
Now, when it comes to calling this function in a data-flow, the run of the job just times out while calling the function. I have tried this via another route and this time-out occured their too until I entered my proxy server login details.
I am assuming I need to do this for the HTTP Adaptor but there is no parameter/setting around for me to do this.
Could you please tell me how I can get my proxy settings in place for the HTTP call? If the solution involves the "axis2" file, please could you give me clear/step-by-step instructions on how to use this and deploy it as that area is all new to me.
Thanks very much for any help.
Flip.

you can set the proxy server details in the Additional JVM Arguments of the HTTP Adapter Configuration using the following syntax. Add this to existing memory setting args
-Dhttp.proxyHost=<enter proxyserver name> -Dhttp.proxyPort=<enter proxy port>
have no idea how to specify the credentials, not sure if that can be done using Java arguments, if you are on windows try running the Jobservice under named user, and see if it works

HTTP Adaptor - Calling GET operations with parameters

Hi Guys,
I have to call a REST HTTP service on an external system. This is a GET operation (that the HTTP Adaptor has an option for so no initial prob there).
However, a REST GET seems to not accept an xml message as input and in fact needs to be called as a URL string. Further more, the parameter format has to be 'just right'....
The URL that needs calling is as follows, note the parameter format of <id type>.<value>
http://somewebsite/api/rest/acs/customer/uuid.1234
Now, what I don't know is how I can successfully ping this GET service using the HTTP adaptor -- I have been able to define the operation, mark it as a GET etc, but it seems to want a DTD for an input schema and this is not relevant here.... Also, if I didn't have a DTD for input schema, how could I set up the call in a Query transform in any case...?
I'm looking for advice on the HTTP adaptor generally for REST GET and POST calls, and also for the specific problem as above.
Any help would be fantastic!
Thanks,
Flip.

Hi,
Thanks for the response.
Can you elaborate a bit about the GET/SET and the non-support of REST? One of the settings when defining an HTTP Adapter operation is to specify if the operation is a GET or a POST -- doesn't this suggest that it does know how to call a REST GET in some way? Otherwise, what kind of things CAN be called via HTTP Adapter?
Thanks!
Flip.

HTTP Adaptor for MBeans

Does WebLogic 7.0 provide an HTTP Adaptor to
JMX MBean Server? If so, what ports are they accessible on ?

Please do not crosspost.
Ahmed Maouche wrote:
Does WebLogic 7.0 provide an HTTP Adaptor to
JMX MBean Server? If so, what ports are they accessible on ?--
Rajesh Mirchandani
Developer Relations Engineer
BEA Support

Administration console on HTTP adaptor

Hi,
I have an existing application which is managed through JMX http connector shipped
with sun's reference implementation.
Now i am evaluating weblogic and want to manage it through the same connector
(and donot want to use the weblogic's admin console). How can i do it?
The documents and googling does not help much.
-Nahk
-Nahk

Use SOAP sender channel and do it with java.
Chcek the possibility of creating fault message with custom validation code in java
check this thread stefans reply on same thing .it will give you a direction how to proceed with it.Hope it helps you
How to send the SOAP Fault Message to the Web Service Consumer
Also see
XML Validation using JAVA

XML Validation on HTTP Adaptor

Hi,
We are implementing a HTTP sender channel on PI 7.11 and requires XML validation to be performed upon receiving. The validation is required to check if all the tags are closed and ended properly. Failing to do so, an error XML will be generated and subsequently send back to the sender.
There is a blog /people/william.li/blog/2009/03/19/adapter-user-module-for-http-adapter detailing the development of user module for HTTP channel but we remain clueless on how can we change it to suit our needs. The XML messages can be of different format (different XSD) thus we need to make this as generic as possible.
Ultimately the intention is to prevent XML to fail at later stage within PI and stopped the communication. Hope any experts out there can point us to the right direction.
Thanks in advance!
Regards,
Wai Xin

Use SOAP sender channel and do it with java.
Chcek the possibility of creating fault message with custom validation code in java
check this thread stefans reply on same thing .it will give you a direction how to proceed with it.Hope it helps you
How to send the SOAP Fault Message to the Web Service Consumer
Also see
XML Validation using JAVA

Transaction code used to configure HTTP Adapter?.

What transaction code we use to configure HTTP adaptor?.
SMICM
Is this correct?.

Ash,
Yes. Please see this weblog for some more help:
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Just go this url and click the first one for HTTP adapter presentation:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=http%20adapter&cat=sdn_all#
Also check this threads:
in SMICM-->How to Activate HTTP Services
SMICM services
---Satish

How to do HTTP GET effectively in PI

Hi ,
I need to download a csv file using HTTPS GET using .Looks like the plain HTTP adaptor only supports POST.I plan to do it by writing a Java client.My question is where to write the implementation ie in Mapping,wrap it under a SOAP web service etc.
Any inputs will be appreciated.
Regards,
Premjit

Hi,
Did you checked the below blog
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
which details the implementation of using java
HTH
Rajesh

Which Adaptor is appropriate please suggest

Hi All,
I have the following scenario and want your suggestions:
A web based applicaiton (say A) to create customer need to integrate with another web based applicaiton (say B) which uses the customer details to display of Applicaiton A... wondering do I need to go for SOAP adaptor/HTTP adaptor or do I need to integrate these two applicaitons at data base level using JDBC adaptor?
What are the steps/any documentation to get the data from web site to SAP PI when User clicks submit button?
Please suggest.
Thanks
Rajeev

>>> but my questtion is what needs to be done at Applicaiton A side to create Input and post the data in the SAP PI URL... As they are using the web client provided by the Application provider..Do they have to write code at the submit button of the web page? If so they have to customnise the code delivered by the provider? How it works.. Its been first time going through this...
Yes, if you create webservice by creating soap sender and give WSDL, then they will have to write webservice client program in java or any language to access your webservice. This program will be called in their side at the time of hitting submit button of the web page.
For this you have to go through soap sender sdn documents.
or As I already mentioned, create HTTP sender and provide your payload structure and url as we discussed in the above replies. A has to create coding to post HTTP using the url during submit hit button on their web page.
>>Do they pass all the values in the URL or to the URL?
This is client A's problem. Why do you worry? There are plenty of documents to do http post.. The below coding is simple snippet..
Search google for plenty of documents...
try {
    // Construct data
    String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
    data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
    // Send data
    URL url = new URL("http://hostname:80/cgi");
    URLConnection conn = url.openConnection();
    conn.setDoOutput(true);
    OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
    wr.write(data);
    wr.flush();
    // Get the response
    BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
    String line;
    while ((line = rd.readLine()) != null) {
        // Process line...
    wr.close();
    rd.close();
} catch (Exception e) {
>>Is it possible to use SOAP adaptor instead of HTTP adaptor? so that I can use AAE in the entire scenario. Applicaiton A is a web client interface through which Customers are created.If I need to use HTTP Adaptor, do I need to create HTTP Sender Adaptor and sender Aggrement ?
Yes, if you host webservice using soap sender adaptor. Already answered above ...
>> If I need to use HTTP Adaptor, do I need to create HTTP Sender Adaptor and sender Aggrement ?
no. Http adaptor is in abap stack. so you dont need sender agreement.

SOAP AND HTTP adptors

Hi All,
Difference b/w SOAP AND HTTP ADAPTORS.
WAITING FOR REPLIES.
SANKAR

Hello
Please check the Rules of Engagement, https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement, before posting on the forum.
Please search the forum before posting questions like this. It has already been answered several times in the forum. Also you will find the answer by searching help.sap.com.
I am closing this thread.
Regards
Mark Smyth
XI/PI Moderator

Scenarios for PI 7.1

Hi,
I am looking for different scenarios for PI 7.1, I am specifically looking for these scenarios.
1. iDoc to File
2. File to iDoc
3. iDoc to Webservice
4. Webservice to iDoc
5. Proxy to Webservice
6. Webservice to Proxy
Please do not send links for PI 7.0, I am specifically looking for PI 7.1
Thanks,
Nishant

Nishant,
THere is no much difference between PI 7.1 except webservices. File,IDOC,proxy will be similar.
Here by sending u new features of PI 7.1.Use ESOA for webservices scenario.
PI7.1 features refer this blog:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
Advanncements of PI 7.1
1. Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services (Concept of Folders,.
Using Folders in PI 7.1
Using Folders in PI 7.1
2. Universal Description, Discovery, and Integration (UDDI) 3.0u2013compliant services registry for runtime management of enterprise services.
XI : How To publish WSDL generated from XI to UDDI
XI : How To publish WSDL generated from XI to UDDI
WebAS : A step by step guide for Configuring UDDI registry on Local Server
WebAS : A step by step guide for Configuring UDDI registry on Local Server
3. Enterprise Service Oriented Architecture (ESOA), Global Data Types, Modeling Tool Concept.
ESOA BASICS
SAP Architecture u2013Enterprise SOA Basics
SAP Architecture Enterprise SOA Basics
Quick Guides for setting up an eSOA prototyping environment with CE, ESR, and NWDS
Quick Guides for setting up an eSOA prototyping environment with CE, ESR, and NWDS
ESA = SOA + ES ?
ESA = SOA + ES ?
PRINCIPAL PROPAGATION
Principal Propagation with SAP NetWeaver Process Integration 7.1
Principal Propagation with SAP NetWeaver Process Integration 7.1
Principal Propagation in SAP XI
Principal Propagation in SAP XI
Modeling tools in PI 7.1
Modeling tools in PI 7.1
Publish services from PI 7.1 to the Service Registry
Publish services from PI 7.1 to the Service Registry
Using CCTS in PI 7.1
Using CCTS in PI 7.1
4. Improved support for standards such as Web Service Reliable Messaging (WS-RM), WS Policy, Security Assertion Markup Language (SAML).
5. Support Business Activity Monitoring (BAM).
XI: BAM - Episode III - new super trace
The specified item was not found.
XI: BAM - Episode II - Simple Proactive monitor
The specified item was not found.
XI: BAM - Episode I - Introduction s
The specified item was not found.
6. Advanced Adapter Engine Features (Eg. Bypass Integration Engine Process)
7. Enhancement for Mapping (Eg. Re-usable User Defined Functions, Look-up function reads multiple fields, Specify mapping parameters at configuration time, Synchronous DB RFC lookups, Message Packing etc.)
SAP PI 7.1 Mapping Enhancements Series: Correct Structural Inconsistencies
SAP PI 7.1 Mapping Enhancements Series: Correct Structural Inconsistencies
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
SAP PI 7.1 Mapping Enhancements Series: Copy XML Subtree
SAP PI 7.1 Mapping Enhancements Series: Copy XML Subtree
SAP PI 7.1 Mapping Enhancements Series: Using Graphical Variable
SAP PI 7.1 Mapping Enhancements Series: Using Graphical Variable
SAP PI 7.1 Mapping Enhancements Series: Share User-Defined Functions
SAP PI 7.1 Mapping Enhancements Series: Share User-Defined Functions
SAP PI 7.1 Mapping Enhancements Series: Import SQL Table's Metadata
SAP PI 7.1 Mapping Enhancements Series: Import SQL Table's Metadata
MAPPING LOOK UPS
Lookupu2019s in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
XI: RFC Mapping lookups (from BC to XI?)
The specified item was not found.
Use this crazy piece for any RFC Mapping Lookups!
Use this crazy piece for any RFC Mapping Lookups!
SAP XI Lookup API: the Killer
The specified item was not found.
mapping look ups RFC api
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
RFC Look up from XSLT mapping
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
Data Lookup Optimized
Data Lookup Optimized
8. Extended support for high volume scenarios
huge processing of files
Night Mare-Processing huge files in SAP XI
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
SAP XI acting as a (huge) file mover
The specified item was not found.
Managing bulky flat messages with SAP XI (tunneling once again) - UPDATED
The specified item was not found.
New NetWeaver Process Integration how-to guide for typical high volumen replication scenarios.
New NetWeaver Process Integration how-to guide for typical high volumen replication scenarios.
9. Business Activity Monitoring for process definition of milestone monitoring (event correlation).
10. Improved SAP NetWeaver Administrator support for central configuration and administration of both mediated and point-to-point scenarios.
11. XML payload validation and validations using JAVA.
VALIDATING MESSAGES
Validation of Messages in SAP NetWeaver Exchange Infrastructure - SDN Member Session EPI213 at SAP TechEd '06 Amsterdam
Validation of Messages in SAP NetWeaver Exchange Infrastructure - SDN Member Session EPI213 at SAP TechEd '06 Amsterdam
SOA Middleware: XML validation error handling
SOA Middleware: XML validation error handling
The Hitchhiker's Guide to Validation
The Hitchhiker's Guide to Validation
Validations using Java for those not having PI7.1
Validations using Java for those not having PI7.1
Xml validation
XML Validation BPM:
VALIDATING INCOMING FLAT FILE
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part II
Generic Approach for Validating Incoming Flat File in SAP XI - Part II
Validating messages in XI using XML Schema
Validating messages in XI using XML Schema
BPM:
Enhancements in ccBPM within SAP NetWeaver Process Integration 7.1
Enhancements in ccBPM within SAP NetWeaver Process Integration 7.1
12. Process editor modeling enhancements: step groups, integrated alert management and configurable parameters.
13. Integration of human interaction (generic user decision).
14. Language dependent texts for end-user display.
15. WS-BPEL 2.0 adoption (Preview and implementation BPEL4People, BPLE-SPE Simple User Defined Functions can be configured directly in the process.)
Also refer this links for more clarifications:
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
Advantages of using PI 7.1 over PI 7.0
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
Edited by: VenkataPrabhakar Teegavarapu on Dec 2, 2008 1:48 PM

XI 3.0 to PI 7.0 upgrade

Hi,
One of my client is oing to upgrade from XI 3.0 to PI 7.0 and I need some information regarding this:
1. What are the advantages offered by PI 7.0 over XI 3.0 ?
2. What are the steps involved in such an upgrade esp from XI 's point of view. Also, do let me know what are the responsibilites of a XI consultant in Xi- PI upgrade.
Thanks....

Hi Patil,
XI 7.0 which I think will be called as PI7.0 will more or less same as XI3.0 except a few changes. Some of them can be found in:
PI 7.0 Information
XI 7.0 installation
SAP XI 7.0 version
Re: SAP XI 7.0 version
/people/michael.eacrett/blog/2006/06/17/obituary-for-sap-netweaver-components-2003-150-2005
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
There is not much difference between XI 3.0 with latest Service Pack i.e. 20 or 21 and PI 7.0
The main difference between 3.0 and 7.0 is the GUI in SLD. But, it is pretty easy to adopt. All other components, e.g. IR, ID, RWB, should virtually be identical.
7.0 also contain some SCM contents not available from 3.0. For most of us, this is a non-issue.
In 7.0 we can schedule a background job and edit the payload.
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
Currently SP 21 for XI 3.0 and SP12 for PI 7.0 is the latest one.
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
See This Thread on the Same Discussion
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Thanks,
Satya Kumar

PI 7.1

Hello Experts,
Can anyone guide me with the PI7.1 Features/Advantages .
why we need PI 7.1 ?
Also , can I know what is the adavntage of having Folders In the IR in PI 7.1.
Also can I know File Adapter and RFC Adapter Sender and Receiver Communication Channel Configuration in PI 7.1
Thanks in Advance
XIUser

Hi
PI 7.1 features refer this blog:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
Advanncements of PI 7.1
1. Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services (Concept of Folders,.
Using Folders in PI 7.1
Using Folders in PI 7.1
2. Universal Description, Discovery, and Integration (UDDI) 3.0u2013compliant services registry for runtime management of enterprise services.
XI : How To publish WSDL generated from XI to UDDI
XI : How To publish WSDL generated from XI to UDDI
WebAS : A step by step guide for Configuring UDDI registry on Local Server
WebAS : A step by step guide for Configuring UDDI registry on Local Server
3. Enterprise Service Oriented Architecture (ESOA), Global Data Types, Modeling Tool Concept.
ESOA BASICS
SAP Architecture u2013Enterprise SOA Basics
SAP Architecture Enterprise SOA Basics
Quick Guides for setting up an eSOA prototyping environment with CE, ESR, and NWDS
Quick Guides for setting up an eSOA prototyping environment with CE, ESR, and NWDS
ESA = SOA + ES ?
ESA = SOA + ES ?
PRINCIPAL PROPAGATION
Principal Propagation with SAP NetWeaver Process Integration 7.1
Principal Propagation with SAP NetWeaver Process Integration 7.1
Principal Propagation in SAP XI
Principal Propagation in SAP XI
Modeling tools in PI 7.1
Modeling tools in PI 7.1
Publish services from PI 7.1 to the Service Registry
Publish services from PI 7.1 to the Service Registry
Using CCTS in PI 7.1
Using CCTS in PI 7.1
4. Improved support for standards such as Web Service Reliable Messaging (WS-RM), WS Policy, Security Assertion Markup Language (SAML).
5. Support Business Activity Monitoring (BAM).
XI: BAM - Episode III - new super trace
The specified item was not found.
XI: BAM - Episode II - Simple Proactive monitor
The specified item was not found.
XI: BAM - Episode I - Introduction s
The specified item was not found.
6. Advanced Adapter Engine Features (Eg. Bypass Integration Engine Process)
7. Enhancement for Mapping (Eg. Re-usable User Defined Functions, Look-up function reads multiple fields, Specify mapping parameters at configuration time, Synchronous DB RFC lookups, Message Packing etc.)
SAP PI 7.1 Mapping Enhancements Series: Correct Structural Inconsistencies
SAP PI 7.1 Mapping Enhancements Series: Correct Structural Inconsistencies
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
SAP PI 7.1 Mapping Enhancements Series: Copy XML Subtree
SAP PI 7.1 Mapping Enhancements Series: Copy XML Subtree
SAP PI 7.1 Mapping Enhancements Series: Using Graphical Variable
SAP PI 7.1 Mapping Enhancements Series: Using Graphical Variable
SAP PI 7.1 Mapping Enhancements Series: Share User-Defined Functions
SAP PI 7.1 Mapping Enhancements Series: Share User-Defined Functions
SAP PI 7.1 Mapping Enhancements Series: Import SQL Table's Metadata
SAP PI 7.1 Mapping Enhancements Series: Import SQL Table's Metadata
MAPPING LOOK UPS
Lookupu2019s in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
XI: RFC Mapping lookups (from BC to XI?)
The specified item was not found.
Use this crazy piece for any RFC Mapping Lookups!
Use this crazy piece for any RFC Mapping Lookups!
SAP XI Lookup API: the Killer
The specified item was not found.
mapping look ups RFC api
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
RFC Look up from XSLT mapping
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
Data Lookup Optimized
Data Lookup Optimized
8. Extended support for high volume scenarios
huge processing of files
Night Mare-Processing huge files in SAP XI
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
SAP XI acting as a (huge) file mover
The specified item was not found.
Managing bulky flat messages with SAP XI (tunneling once again) - UPDATED
The specified item was not found.
New NetWeaver Process Integration how-to guide for typical high volumen replication scenarios.
New NetWeaver Process Integration how-to guide for typical high volumen replication scenarios.
9. Business Activity Monitoring for process definition of milestone monitoring (event correlation).
10. Improved SAP NetWeaver Administrator support for central configuration and administration of both mediated and point-to-point scenarios.
11. XML payload validation and validations using JAVA.
VALIDATING MESSAGES
Validation of Messages in SAP NetWeaver Exchange Infrastructure - SDN Member Session EPI213 at SAP TechEd '06 Amsterdam
Validation of Messages in SAP NetWeaver Exchange Infrastructure - SDN Member Session EPI213 at SAP TechEd '06 Amsterdam
SOA Middleware: XML validation error handling
SOA Middleware: XML validation error handling
The Hitchhiker's Guide to Validation
The Hitchhiker's Guide to Validation
Validations using Java for those not having PI7.1
Validations using Java for those not having PI7.1
Xml validation
XML Validation BPM:
VALIDATING INCOMING FLAT FILE
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part II
Generic Approach for Validating Incoming Flat File in SAP XI - Part II
Validating messages in XI using XML Schema
Validating messages in XI using XML Schema
BPM:
Enhancements in ccBPM within SAP NetWeaver Process Integration 7.1
Enhancements in ccBPM within SAP NetWeaver Process Integration 7.1
12. Process editor modeling enhancements: step groups, integrated alert management and configurable parameters.
13. Integration of human interaction (generic user decision).
14. Language dependent texts for end-user display.
15. WS-BPEL 2.0 adoption (Preview and implementation BPEL4People, BPLE-SPE Simple User Defined Functions can be configured directly in the process.)
Also refer this links for more clarifications:
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
Advantages of using PI 7.1 over PI 7.0
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7

Difference between XI 3.0 and PI 7.0

Hi,
What is difference between XI 3.0 and PI 7.0
Is this way we check version:
System-- Staus -- Component Information --
PI_BASIS -- 2005_1_700
So the above system is PI 7.0 -- right?
Regards

Hi Rick,
PI 7.0 works on WEBDYNPRO....They are basically the same technically but when SAP launched Netweaver 2004s , to bring all objects of Netweaver 2004s in Synch with the WAS version, XI was renamed to Process Integration (PI 7.0) .
A comparison of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Regards,
Vinod.

HTTP Adaptor

Similar Messages

Maybe you are looking for