HTTP code 500 trying to connect to VSO

Hi;
We've been using VSO for months with no problem. Now all of a sudden we're getting:
How do we fix this? We're down with VSO not available!!!
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

Similar Messages

Adobe DRM Activator error Client Code: 31 - HTTP Code: 500

a few years ago I bought a "C++ Primer" programming book from Amazon. The book is no longer downloadable from Amazon... the DRM version has gone to some other DRM format. THIS IS MY FIRST AND LAST DIGITAL DRM BOOK.
I have not been able to read it although I shelled out a whoppy $45.00 USD. Adobe Digital Edition is stupid and find it awkward to use. I found one copy of the book on my old laptop that appears to be not corrupt. I'm now trying to read it from my desktop (its a 23 inch screen. Adobe suppport SUCKS, I've been at trying to open this DRM book for several Years now. The last time ADE kept kicking back "No internet connection" when I clearly have a one.
Now I'm getting this error pasted from ADE after adding the book to my library (<---stupid term for this but it is what it is). I JUST WANT TO OPEN THE BOOK I PAID FOR. I'm suppose to be able to open this book on SIX different PCs...WTF
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---

THIS FORUM SUCKS
NO RESPONSE. MY FIREWALL IS OFF, NO PROXY NO VIRUS SCAN AND DRM CRAP SPITS THIS ERROR OUT...
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---
ADOBE HIGHWAY ROBBERY.

Http code 500 internal server error

Hi all!
I hope someone can help me out.
A few days ago Windows crashed (some Explorer failure) and I had to restore Vista back on my pc. I also had to reinstall DW CS3. It all used to work fine but now I get an '500 internal server error'. When I fill in the data in the 'manage sites' and I test my connections (both remote and testing server) it connects fine. When I make a new recordset and test it, I get the error:
Has anybody had this problem? I do not know what to do anymore.
Thanks in advance, with the best regards from Holland,
Martijn

Hi,
Yes, I'm referring to the DSN's setup on the remote server.
I'm getting fed up with this bug....
Martin
Date: Wed, 8 Jul 2009 15:08:24 -0600
From: [email protected]
To: [email address deleted by Moderator]
Subject: Dreamweaver Application Development http code 500 internal server error
I'm also getting an HTTP 500 error from the server, even though the recordset tested successfully,
and the records were displayed in Live View. The server can process ASP, it displays pages created
with ASPMaker. In your reply, are you referring to the DSN's set up on the remote server?
Thanks.
Joe
>

Error sending DAV request. HTTP code 500, status 'Internal Server Error'

Hi All,
I am getting the error On SCCM R2 Environment .. on the client machine we are getting the below issue and software center
is not showing any information..
While checking on the client's DatatransferService.log.. i am getting the below issues..
Successfully sent location services HTTP failure message.
Error sending DAV request. HTTP code 500, status 'Internal Server Error'
GetDirectoryList_HTTP('http://MachineName:80/SMS_DP_SMSPKG$/7ea0b105-5592-48cd-8b8e-81777537c34f') failed with code 0x87d0027e.
i realize it because of Isapi filter issues.. can any one guide me to resolve the issues..
KJSUBBU

Hi,
In addition, I recommend you check whether you have additional Authentication methods (like ASP.NET Impersonation) enabled.
Disable the authentication method and try again.
Also, please review the link below, here is a article about troubleshoot ISAPI filter issue.
Error message when you visit a Web site that is hosted on IIS 7.0: "HTTP Error 500.0 – Internal Server Error"
http://support.microsoft.com/kb/942031
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HTTP Response :500 unable to connect to remote system.

Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error)

Hi,
When i am executing the Client proxy in ABAP, i am getting SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error).
how to resolve it, can any one help.
Thanks & Regards,
Brahmaji.

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")    Exception of class CX_AI_SYSTEM_FAULT

Hi All,
        while Running Client Proxies from se80 im getting Following error. i already checked all the Services All are active only. can any one suggest me:
SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")
Exception of class CX_AI_SYSTEM_FAULT
RFC Trace:
**** Trace file opened at 20140630 124650 IST, by disp+work
    **** Versions SAP-REL 721,0,201 RFC-VER U 3 1460390 MT-SL
    XRFC> Begin of user trace
    XRFC>
    XRFC>
<
    XRFC> TRACE SOAP RUNTIME - header
<
    XRFC>
<
    XRFC>
    XRFC> SESSION_ID : 0002425553A5ECFC63B114C4E1000000C0A80141
    XRFC> TS_CALL
: 20140630071647.5930180
<
    XRFC> SY_UNAME   : SAPADMIN
<
    XRFC> HOSTNAME   : SOLAR-DEV
<
    XRFC> SY_SID
: DEV
<
    XRFC> SY_MANDT   : 001
<
    XRFC> SYS_NR
: 01
<
    XRFC> APPLSERVER : SOLAR-DEV_DEV_01
<
    XRFC> ISPRESCHED : X
<
    XRFC> PARENT_ID : ROOT_CALL_ID
<
    XRFC> REQ_SIZE   : 1821
<
    XRFC> RESP_SIZE : 75
<
    XRFC> DURATION   : 2246
<
    XRFC> NETHDRTIME : 2246
<
XRFC> CALL_STATE : 2
<
XRFC> ERRORTYPE : SYSFAIL
<
XRFC> ERRORAREA : COREMSG
<
XRFC> CTXDP_TYPE : SOAP_RUNTIME
<
XRFC> SYNC_ASYNC : S
<
XRFC> LOCATION   : C
<
XRFC> DIRECTION : O
<
XRFC> REQ_ID
: 52EDA553B163C414E1000000C0A80141
<
XRFC> RESP_ID
: 00000000000000000000000000000000
<
XRFC> MSG_STATE : 114
<
XRFC> IF_NAME_I : YSCO_SAPORDERS_SOAP
<
XRFC> IF_NS_E
<
XRFC> IF_NAME_E :
<
XRFC> ISSHORTCUT :
<
XRFC> TRC_PATT   : WSTEST
<
XRFC> TRC_KEY
: 50EDA553B163C414E1000000C0A80141
<
XRFC> TRC_SSID   : DEV_01
<
XRFC> TRC_USER   : SAPADMIN
<
XRFC> TRC_TS
: 20140630071647
<
XRFC> TRC_COUNT : 98
<
XRFC> TRC_EXT
<
XRFC> COMPLETE   : OK
<
XRFC> CALLEDPROG : YSCO_SAPORDERS_SOAP
<
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:client
<
XRFC> CONF_ID
<
XRFC> BIND_ID
<
XRFC> OP_NAME
: InsertPPOrders_Development
<
XRFC> COMM_PATRN : Method:InsertPPOrders_Development
<
XRFC> OP_NS
: http://microsoft.com/webservices/
<
XRFC> REMADDRESS :
<
XRFC> LP_NAME
: YSLP1
<
XRFC> DT_OBJ
: YSCO_SAPORDERS_SOAP
<
XRFC> MEMCONSUMP : 198
<
XRFC> BONAME
<
XRFC> PROCCOMP   :
<
XRFC> DEPLOYUNIT :
<
XRFC>       <
XRFC>
<
XRFC> TRACE SOAP RUNTIME - trace records
<
XRFC>
<
XRFC>       <
XRFC> E SOAP_RUNTIME 20140630071649.8380110 : CL_SOAP_RUNTIME_CLIENT
<
XRFC> ->EXECUTE_PROCESSING Exception handling in SOAP runtime
<
XRFC>
<
XRFC>
<
XRFC> E SOAP_APPLICATION 20140630071649.8382410 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING Exception
<
    XRFC> handling in SOAP runtime
<
    XRFC>
<
    XRFC>
<
    XRFC> E HTTP_TRANSPORT_BINDING 20140630071649.8368980 : CL_SOAP_HTTP
<
    XRFC> _TPBND_ROOT ->HANDLE_STATUS_CODE Received return code 500 (
<
    XRFC> Internal Server Error )
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_RUNTIME 20140630071649.8379970 : CL_SOAP_RUNTIME_CLIENT
<
    XRFC> ->EXECUTE_PROCESSING A SOAP Runtime Core Exception occurred in
<
    XRFC> method get_http_headers of class CL_SOAP_HTTP_TPBND_ROOT at
<
    XRFC> position id 3 with internal error id 1026 and error text SRT:
<
    XRFC> HTTP-Code 500: ("Internal Server Error") (fault location is 1 ).
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_APPLICATION 20140630071649.8382290 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING A SOAP Runtime <
    XRFC> Core Exception occurred in method get_http_headers of class
<
    XRFC> CL_SOAP_HTTP_TPBND_ROOT at position id 3 with internal error id
<
    XRFC> 1026 and error text SRT: HTTP-Code 500: ("Internal Server Error")   <
    XRFC> (fault location is 1 ).
<
    XRFC>
<
Find The Attachment for error:

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

Provisioning failed: HTTP code=500 - Meaning?

On webGUI of SX10 recently upgraded to 7.2.0.
TMS visibility is fine
Endpoint operates fine
TMS is able to send and clear phonebooks fine.
No Endpoint Troubleshooting Guide avail. for this soft. version (as of this writing)
What is cause of this? Network issue with certain traffic?

HTTP Error 500 is a response back from the server, and a generic one when it can't be more specific about what failed.
What are your provisioning settings set to on your SX10 (Configuration > System Configuration > Provisioning)? Are they pointing to the correct Provisioning Mode, ExternalManager Address, Path and Protocol?
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

HTTP-CODE 500 when POST via https

Hi,
I've a serious problem here. When I try to post some data to a https server I'll always get an 500 internal Server Error back. What could be the problem? Here is my code that is responsible for posting:
        System.setProperty("proxySet","true");
        System.setProperty("https.proxyHost",prxy);
        System.setProperty("https.proxyPort",prxyPrt);
String hh = "https://" + host;
            URL u = new URL(hh);
            con = (HttpsURLConnection)u.openConnection();
            con.setDoOutput(true);
            con.setDoInput(true);
            PrintWriter out = new PrintWriter(con.getOutputStream());
            out.write(daPost);
            out.flush();
            BufferedReader in = new BufferedReader(new InputStreamReader(con.getInputStream()));
            int c;
            while((c = in.read()) != -1) {
                System.out.write(c);
            con.disconnect();The stuff that is stored in daPost is bullet-proof correct, because when it is posted with a VB-Application everything is ok........ and it is verified that both my java-application and the vb-application are producing the same POST-Data
What could be the problem?
Big thx in advance.
LoCal

Did you try to make the same post from an html form using a browser? That might show some extra info on what the problem with the post excactly is. Also, you are using a proxy server, the 500 reply could come from the host you are posting to, but also from the proxy server.
What's in host? Is there a full url in it, or just the hostname? It might be you are trying to post to "https://somewhere.com" instead of to "https://somewhere.com/somescript.cgi".

Error Code 500 on Test Connection

Have read several postings on this, but nothing seems to
work. Can anyone help? I am tring to start the tutorial that ships
with DW8.

Hi
We really need a few more details to assist.
Mac or PC? V8 or 8.02, remote server or local server,
windows, unix, apache
etc etc also it helps if you describe exactly what you are
trying to do.
Once you post that someone will come to your aid.
error 500 is a bit generic broadly it's a server error but
that can cover a
multitude of sins from no connection to server down
HTH
Ian
[email protected]
http://www.edwards-micros.co.uk
"provenir" <[email protected]> wrote in
message
news:e9oi64$sm0$[email protected]..
> Have read several postings on this, but nothing seems to
work. Can
> anyone help? I am tring to start the tutorial that ships
with DW8.

Wierd error message while trying to connect...

I''ve created a small OCCI application with Visual C++. I receive the following error in the code that tries to connect:
ORA-24960: the attribute OCI_ATTR_PASSWORD is greater than the maximum allowable length of 255
My password is less than 10 characters.
Any ideas?
Thank you,
Jason
Oracle Instant Client 10.2.0.1
Windows XP Professional SP1
Microsoft Visual C++ 6.0

Code:
#include "stdafx.h"
#include <occi.h>
#include <iostream>
#include <string>
using namespace oracle::occi;
using namespace oracle::occi::aq;
using namespace std;
#pragma comment(lib, "oci")
#pragma comment(lib, "oraocci10")
int main(int argc, char* argv[])
    Environment *pEnv = NULL;
    try
        string user = "myuser";
        string password = "mypassword";
        string db = "mydb";
        pEnv = Environment::createEnvironment();
        Connection *pConnection = pEnv->createConnection(user, password, db);
        pEnv->terminateConnection(pConnection);
    catch(exception &str)
        cout << "Exeception : " << str.what() << endl;
    if(pEnv != NULL)
        Environment::terminateEnvironment(pEnv);
    return 0;
Dependencies:
Dump of file C:\instantclient_10_2\bin\oraocci10.dll
File Type: DLL
Image has the following dependencies:
OCI.dll
MSVCR71.dll
MSVCP71.dll
KERNEL32.dll
Summary
2000 .data
C000 .data1
29000 .rdata
8000 .reloc
1000 .rsrc
78000 .text
5000 .text1
Compile/link: I have no idea. I am linking to oraocci10.lib and oci.lib. I can send a makefile if necessary.
Why do you say the client can be only used in VS .Net? I have seen plenty of postings in the forum of people using Visual C++ 6.
Thanks for your input,
Jason

Adobe DRM Activator error (client code 31); HTTP code 404. Fault location: 15

dear all,
a few years ago I installed and configured Adobe Digital Editions. I bought some ebooks as well. Meanwhile I have switched my computer. And today I discovered my ebooks. I clicked on them and the system tells me that I have to install ADE and to activate the computer. So I successfully downloaded ADE installed it and activeated it.
ADE immediately shows me all the books I bought years ago. Then I clicked on the books I wanted to read. A window popped up which told me that the book is no more available - due to a changed path. I found no possibility to change an existing ADE configuration.
I opened ADE and added a book I bought by opening the option to add a file and openend the ebook on its new location. The ebook was loaded, authorized and I could read it. Clever - I thought. Thats the way to clean up my library. First lets delete all the ebooks in the library with the broken location. Afterwards lets add it via the option to add ebooks. Thats what I did. I deleted all the ebooks first. Afterwards I wanted to add all the books like I already did it with the first one. But - I no more could do that!
This is what I get:
Your Adobe software could not be activated. HTTP error on Adobe DRM Activator request. Adobe DRM Activator error (client code 31); HTTP code 404. Fault location: 15
Does this mean that ADE server does no more authorize my bought ebooks after I had deleted the broken-link-ones from my library?
I hope not ! - This would be awfull - all my books would be gone !!
I hope someone could follow my problem description and hope that there is a simple solution for that.
Thanks,
D.

THIS FORUM SUCKS
NO RESPONSE. MY FIREWALL IS OFF, NO PROXY NO VIRUS SCAN AND DRM CRAP SPITS THIS ERROR OUT...
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---
ADOBE HIGHWAY ROBBERY.

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

Connection AFW failed, due to: Received HTTP response code 500

Hi,
I have tried to develop a file to file scenario in XI 3.0. The Sendor File adapter is reading the file but the message is not getting transfered to Integration engine.
The audit log for the message is as follows:
2005-05-07 04:10:24 Success Channel FileSendor: Send binary file "/tmp/xi_input.dat". Size 324 with QoS EO
2005-05-07 04:10:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2005-05-07 04:10:24 Success Trying to put the message into the send queue.
2005-05-07 04:10:24 Success Message successfully put into the queue.
2005-05-07 04:10:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2005-05-07 04:10:24 Success Confirmation mode test found. File will be resent next time
2005-05-07 04:10:24 Success The message was successfully retrieved from the send queue.
2005-05-07 04:10:24 Success The message status set to DLNG.
2005-05-07 04:10:24 Error Transmitting the message to endpoint http://nadcp517:8020/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
Any suggestion...

hi
This problem comes due to the post installation steps might be at the time of post installation some wrong might be done.
step1 : In sxmb_adm configure the integration server by giving the path as http://<host>:<abapport>/sap/xi/engine?type=entry
step 2 : Check ur business system created at the time of post installation there u need to main the path as it as above.
Reward points if useful,
Regards,
Srinivas.D

HTTP Error Code 500 Internal Server Error creating connection

Hi, i have an error when i try to create a database connection
i have windows 7
php 5
mysql 5
if i try to connect to mysql with a icode i gererate it connects perfect.
if i use for example ems mysql manager it connects perfect to the databases
but when i try to create a connection in dreamweaver it appears:
HTTP Error Code 500 Internal Server Error
i dont know what to do.
i have done a lot of steps for solve other errors:
- chance mysql passwords for old_password
- remove cache file
any idea ??
thanks.

I would look at your log files on your server to see what is the issue.
You most likely will have a php error log and a server error log. That will point you in the right direction.

HTTP code 500 trying to connect to VSO

Similar Messages

Maybe you are looking for