HTTP Daemon is failing

I'm kinda new I freshly installed arch linux updated with -Syu and -Syy put nothing else on and installed -Sy apache php mysql without it mention problems I went through the very simple steps included in the lamp guide and my HTTP Daemon still fails when I try to start it. Any help will be appreciated if you need anything else to help me just let me know i'm not sure what information you need.

This started happening to me too today. I'm not yet sure what it is. This is the output from /usr/sbin/apachectl start
httpd: ../sysdeps/posix/getaddrinfo.c:1465: rfc3484_sort: Assertion `src->results[i].native == -1 || src->results[i].native == a2_native' failed.
/usr/sbin/apachectl: line 78: 2933 Aborted $HTTPD -k $ARGV
My router is not bricked as I am posting this message through its Internet connection.
Last edited by chris256 (2008-12-24 01:00:54)

Similar Messages

Failed to start HTTP daemon

I'm trying SSL thru the iMS 5.2
I've down a frish installation for the iMS 5.2
I'm facing this problem, when i start the messaging server i got this ERROR:
development # ./start-msg
/app/ims-thru-ssl: POP3 daemon process already running: 4043
/app/ims-thru-ssl: IMAP4 daemon process already running: 4057
/app/ims-thru-ssl: Starting HTTP daemon ...Cannot bind to port 80: Address already in use
ERROR: Failed to start HTTP daemon: /app/ims-thru-ssl/bin/msg/store/bin/mshttpd
Dispatcher already running
Starting ENS daemon
ERROR: The following services failed to start, or were already:
HTTP daemon
Could someone help me on this issue...

Use netstat to see what's listening on port 80. Perhaps a web server or something?
It looks like you're trying to start a server that's partially running already, so you will want to check what processes are running, too

Http: snmehl_connect: connect failed

I am receiving this error in my emdctl.trc
2007-08-28 15:11:48 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
Enterprise Manager recognizes that db is open, listener is running and agent is up. But still says on it main page: Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.....
Any pointers?
Thanks in advance.
Br,
Anjum

[lxcms120] /localscratch/orahome > cat /localscratch/orahome/oracle/product/10.2.0/db_1/install/portlist.ini
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (oralxcms120) = 1158
Enterprise Manager Agent Port (oralxcms120) = 3938
So, port 3938 is for Agent. I am not running any agent.
[lxcms120] /localscratch/orahome > emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://lxcms120.cern.ch:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ......................... started.
Logs are generated in directory
/localscratch/orahome/oracle/product/10.2.0/db_1/lxcms120.cern.ch_oralxcms120/sysman/log
emdctl.trc in above mention directory says:
2007-08-28 16:23:54 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:23:58 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:02 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:06 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:10 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:14 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:17 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:21 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:25 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:29 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:33 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:37 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:41 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:45 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:49 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:52 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:24:56 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:25:00 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
2007-08-28 16:25:04 Thread-3086993632 WARN http: snmehl_connect: connect failed to (lxcms120.cern.ch:3938): Connection refused (error = 111)
Now, it is running fine. I didn't do anything. Just restarted db and emctl and even now emctl log has such warning but it is happy running fine.
Any info about its abnormal behavior?

Lync mobility and HTTP authentication test failed. Is reverse proxy required?

I currently have the following setup.
1 x 2013 edge server lync1.local.com
has 3 dmz ips for external names
has 1 internal ip
2 x 2013 std front end servers lync2 & lync3.local.com
Ive read that in 2013 the mobility service is installed automatically on the front end servers and i do see it running on both.
All my clients can connect from the windows and mac clients(internally and externally) but not from phone or windows app store client (internally or externally)
running the exchangeconnectivity test on the website i get the following error
Testing HTTP authentication methods for URL https://lyncdiscover.external.com/Autodiscover/AutodiscoverService.svc/root/user.
HTTP authentication test failed.
Additional Details
A Web exception occurred because an HTTP 404 - NotFound response was received from Unknown.
HTTP Response Headers:
X-MS-Server-Fqdn: lync1.local.com
Connection: close
Content-Length: 64
Content-Type: text/plain
Server: RTC/5.0
Elapsed Time: 427 ms.
After some reading I notice that many people refer to a reverse proxy when dealing with mobility.
I do not have a reverse proxy server installed. Is this required for the mobility to work correctly? I cant just use the edge server?
Thanks in advance for any help.

Take a look at Georg Thomas' blog: http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html also the Citrix official documentation: http://www.citrix.com/global-partners/microsoft/netscaler.html
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

The HTTP authentication test failed on activesync exchange 2010

`21

Testing HTTP Authentication Methods for URL https://xxxxxdyndns.biz/Microsoft-Server-ActiveSync/.
The HTTP authentication test failed
Additional Details
The Initial Anonymous HTTPS request didn't fail, but Anonymous isn't a supported authentication method for this scenario.
Elapsed Time: 670 ms

Cisco ACE Mod 30 - HTTPS probes are failing after hardware replacement.

We recently had a hardware failure on ACE Mod30. The replacement went in relatively painless (except for having to import about 100 SSL Certificates and Private Keys).
However, on the new ACE, the HTTPS probes are failing for all contexts using them. We can work around this by using TCP-443 probe, but the customer prefers that we actually request a logon page to ensure that the application is running properly.
Here are the probe stats for one context (THIS ONE IS ACTIVE)
BRTDCSCRTR2/INTRA-DEV-TST# sho stats probe type https
+------------------------------------------+
+----------- Probe statistics -------------+
+------------------------------------------+
----- https probe ----
Total probes sent : 52422 Total send failures : 0
Total probes passed : 0 Total probes failed : 52422
Total connect errors : 0 Total conns refused : 0
Total RST received : 0 Total open timeouts : 52422
Total receive timeout : 0 Total active sockets : 0
Here are the probe stats for one context (THIS ONE IS HOT_STANDBY)
BRTDCSCRTR2/INTRA-PROD# sho stats probe type https
+------------------------------------------+
+----------- Probe statistics -------------+
+------------------------------------------+
----- https probe ----
Total probes sent : 69398 Total send failures : 0
Total probes passed : 0 Total probes failed : 69398
Total connect errors : 0 Total conns refused : 0
Total RST received : 0 Total open timeouts : 69398
Total receive timeout : 0 Total active sockets : 0
Everything else appears to be working properly, except for the HTTPS probes.

Hi,
For HTTS Probes to be successful, you don't need to have SSL Certs/Private keys on ACE, unless servers are doing client authentication. When ACE sends HTTS Probes to servers, it acts as a client.
Here are few things that can be tried:
- Test HTTS probe with only one server. Reload the server to clear any SSL cache on it.
- check SSL probe detail to verify the error code received
- Take captures between ACE and that server to find at what stage of the probe packet exchange flow is failing.
Here is a good link to troubleshoot HTTPS probe issues:
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_Troubleshooting_ACE_Health_Monitoring#Troubleshooting_an_HTTPS_Probe_Error
Regards,
Hasham

Is pulseaudio broken? (main.c: daemon startup failed)

Hi everyone, i just followed the wiki, and didn't manage to get pulse working.
Just wondering, is it broken?
I can't get it to work in rc script, i get ' E: main.c: daemon startup failed.',
tried to comment the out .failed, in /etc/pulse/default.pa as suggested on the wiki, but it didn't help.
I ignored the messege as someone said on the fourm it works anyway, and didn't see it on gnome's mixer.
I tried to use abs, but it seems to be broken too.
So, how did you get your pulseaudio working?
Thanks in advance.

Ok, i just built it from abs and got an error, then, i realized i had double values for the same config in pulseaudio conf.
Anyways, i'm not sure if that was because a broken package, or it was wrong configured from the first place.
Now it works good anyway..

SOAP Adapter XI 3.0 - HTTP 200 response fails

We have a scenario where a request message is sent successfully to a URL by the SOAP Adapter.
However, the response message has an HTTP response of 200 (meaning ok) which is not handled correctly by the
SOAP Adapter.
The error text shown in SXMB_MONI is:
com.sap.aii.af.ra.ms.api.DeliveryException: Failed to call the endpoint HTTP 200 OK
Is there something I am missing in the configuration to allow HTTP responses in the SOAP Adapter ? It is very odd that the SOAP Request works fine, but the SOAP Response does not.
Any ideas anyone ?
Kind regards
Colin.

Hi Bill
1. synchronous out / in
2. yes
3. working fine
following the way out to the elocateserver system is working fine.
The soap is working and the responce from the elocteserver is fine . But when the message is pick put the Timeout show up.
below is the Responce from elocateserver to xi
Hope this will help you
thanks olaf
Help
!http://sapnt09:50200/sap/public/icman/img/theme.jpg|alt=SAP|width=122 height=61 border=0 |src=http://sapnt09:50200/sap/public/icman/img/theme.jpg!
500 Connection timed out
Connection timed out (-5)
Error:
-5
Version:
6040
Component:
ICM
Date/Time:
Sat Oct 16 06:13:25 2004
Module:
icxxthr.c
Line:
2556
Server:
sapnt09_M64_02
Detail:
Connection to partner timed out
© 2001-2003, SAP AG

TREX 7.1 IIS logon failed http service start failed

TREX 7.1 Rev 36 wurde in folgender Systemumgebung installiert:
Windows Server 2008 R2 Standard (64 Bit)
Java: Sun JSE 1.4.2 64bit (1.4.2_25 Rev b02)
Umgebungsvariablen JAVA_HOME=C:j2sdk1.4.2_25-x64 gesetzt bzw. PATH ergänzt
um C:j2sdk1.4.2_25-x64jre in
IIS 7.5 wurde installiert
Problem: Beim Schritt "Configuring the TREX Web Server" (Seite 48f.) bleibt der Service "httpserver" als einziger im roten Zustand.
aptrex01 31005 httpserver - http.//aptrex01:31005/TREXHttpServer/TrexlsapiExt.dll
Ein Restart-Versuch ergibt:
"Restarting the http service finished:
TREXIISCtrl.exe -ul -iisrestart /tns:aptrex01:31001
IIS logon failed. Wrong sidadm password used by TREXIISCtrl.exe
or no sidadm password stored in TREXIISCtrl.exe.
HttpServer could not be restarted."
Die SAP-Hinweise 1423381, 1008299 und 1029783 sind bekannt.
1423381: IIS 6.0-Kompatibilität wurde nachinstalliert
1008299: der IIS wurde bislang noch NICHT in den 32-Bit-Modus gesetzt
1029783: die beiden Dateien msvcp71.dll und msvcr71.dll waren zwar nicht im angegebenen exe-Verzeichnis zu finden, wurden aber von C:TEMPClt-InstSystem32 (Datum 12.01.2010) in die aufgeführten Verzeichnisse kopiert.
Der Blog /people/bettina.knauss/blog/2006/12/11/trex-admin-tool--troubleshooting-if-httpservice-is-not-running ist bereits bekannt (Bettina Knauss), ebenso dieser SDN Thread:
(CRM2007 to Trex server issue).
Mit freundlichen Grüßen
Rüdiger Höckel
apetito AG
SAP Basis

Hi Mark,
I know the SAP Note 1483929. When I execute the command it breaks.
\usr\sap\TXD\TRX03\exe>trexiisctrl -ul -storeprops /ap:<PASSWORD> /sp:<PASSWORD> /tns:txdci:30305
Environment variable DIR_EXECUTABLE not set, using SAP_RETRIEVAL_PATH/.. as fallback
SAPLOCALHOST='txdci'
SAPSYSTEMNAME='TXD'
SAPSYSTEM='03'
SAP_RETRIEVAL_PATH: 'I:\usr\sap\TXD\TRX03\txdci\'
TARGET: 'I:\usr\sap\TXD\TRX03\txdci\'
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Kind regards,
Roland

Error http the request failed with http status 401: unauthorized

Hi,<o:p></o:p>
We are currently developing a Web Part for a
dashboard that connects from SharePoint 2010 to Project Server, we are trying
to connect via the PSI web service and fetch the project data but it is giving
the same error "The request failed with HTTP
status 401: Unauthorized". We are having a huge
issue with gaining authorization through the PSI and cannot figure out what the
problem is. We are using Project Server 2010, SharePoint 2010 and Visual Studio
2010.<o:p></o:p>
The person developing this has administrative
rights on both servers and it is running on his account. However, this is his
first experience with Project Server. Could some provide some guidance?<o:p></o:p>
Does anyone have any suggestions?<o:p></o:p>
Thanks,<o:p></o:p>
Aba
<o:p></o:p>

Hi,
Have the credentials been set for the web service? Or are you trying to pass the credentials of the user accessing the webpart? In the second case, the user must have permissions in project server
It would be useful if you can share the part of the code that fails
Paul

Daemon script fails -- no log entries. [SOLVED]

Greetings.
A daemon script I got for rTorrent I got from this page, fails to start
No entries show up in dmesg or any logs in /var. I've compared the script to a couple others, but see noe obvious differences that would indicate why the script should fail.
The user and app dir is correct.
What am I missing?
Thanks.
Last edited by zfsd (2010-01-15 20:46:10)

Ah.. bullocks - seems like I missed the part about dtach. Doh!

Request HTTPS two times FAILS

I have an httpS - URL that, when entered in internet explorer (IE), results in an xml-file as response.
And when executing same URL again in IE - by pressing refresh - I recieve another xml-file as response
And this is how it SHOULD be.
Now, when trying to do the same thing in Oracle PL/SQL, only the first response works out but
when trying again for the additional response, i get the following errors:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", row 1385
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", row 1227
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at row 31
(words "at" and "row" are my translation)
(We are using Oracle9i Release 9.2.0.7.0)
This is my code:
utl_http.set_wallet('file:D:/oracle/WALLETS/', 'btjwall1');
utl_http.clear_cookies;
http_req := utl_http.begin_request(in_url);
http_resp := utl_http.get_response(http_req);
DBMS_OUTPUT.PUT_LINE('SO FAR SO GOOD');
utl_http.read_text(http_resp, env);
utl_http.end_response(http_resp);
dbms_lock.sleep(3);
http_req := utl_http.begin_request(in_url2);
http_resp := utl_http.get_response(http_req);
DBMS_OUTPUT.PUT_LINE('WISH YOU WERE HERE!');
utl_http.read_text(http_resp, env);
utl_http.end_response(http_resp);
I have also tried various combinations of
utl_http.set_persistent_conn_support(....);
utl_http.set_cookie_support(....);
Since I know the called server demands cookie support
Any idea?
I'm stuck.
Brgrds
Peter

does this procedure help - Error using UTL_HTTP over HTTPS

Http get requests fail after a few weeks

All,
I have a get request to a servlet that works for a few weeks, then it will suddenly stop.
I change the code once, works,then it will fail after a few weeks.
I change the code again, works, then it will fail after a few weeks.
Servlet works like: send one request, wait, then send a second.
Here are the last 2 code iterations:
try {
        // Construct data
        String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
        data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
          //String data = "";
        // Send data
        //URL url = new URL("http://localhost:8080/stocks?action=1&date=20080310");
        URL url = new URL("http://localhost:8080/stocks/monitor?action=1&date="+stringDate);
        URLConnection conn = url.openConnection();
        conn.setDoOutput(true);
        OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
        wr.write(data);
        wr.flush();
        // Get the response
        BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        //System.out.println(rd.read());
        String line;
        int count =0;
        while ((line = rd.readLine()) != null) {
            // Process line...
             System.out.println(count + line);
             count++;
        wr.close();
        rd.close();
    } catch (Exception e) {
    try {
        // Construct data
        String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
        data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
         //String data = "";
        // Send data
        URL url = new URL("http://localhost:8080/stocks/monitor?action=2");
        URLConnection conn = url.openConnection();
        conn.setDoOutput(true);
        OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
        wr.write(data);
        wr.flush();
        // Get the response
        BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        String line;
        int count =0;
        while ((line = rd.readLine()) != null) {
            // Process line...
             System.out.println(count + line);
             count++;
        wr.close();
        rd.close();
    } catch (Exception e) {
    }I send this request twice with different params
public static String sendGetRequest(String endpoint, String requestParameters)
String result = null;
if (endpoint.startsWith("http://"))
// Send a GET request to the servlet
try
// Construct data
StringBuffer data = new StringBuffer();
// Send data
String urlStr = endpoint;
if (requestParameters != null && requestParameters.length () > 0)
urlStr += "?" + requestParameters;
URL url = new URL(urlStr);
URLConnection conn = url.openConnection ();
// Get the response
BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
StringBuffer sb = new StringBuffer();
String line;
while ((line = rd.readLine()) != null)
sb.append(line);
rd.close();
result = sb.toString();
} catch (Exception e)
e.printStackTrace();
return result;
}Any ideas?
Edited by: iketurna on Mar 13, 2008 7:21 AM

You appear to have empty catch blocks. Which means you don't get the error message that would tell you what is failing.
Put in code that logs the exception and the stack trace of the exception. If you can't figure out the error message, post it here.
You should be closing streams in finally statements. Otherwise they might not get closed when there is an error -> you leak descriptors -> you run out of descriptors -> every stream open will fail -> more errors -> more descriptors get leaked -> etc -> everything stops working. Always do it like this:
    WhateverStream out = null;
    try {
        out = ...;
        ...use out...;
    } finally {
        try {
            if (out != null) out.close();
       } catch (IOException e) { ...log it... }
    }

HTTP Receive location failing to in BizTalk

Hi All,
BizTalk application receives request from external vendor using HTTP Receive location which uses HTTPReceive.dll
2 servers A and B in the production performing well, but it fails from yesterday. Could see request coming through the IIS in the IIS log, but it is not reaching to biztalk application.
I have tried these steps in both A and B machines
1. restart the biztalk app
2. restart the application pool of the website that connects this app
3. reset iis in the machines
How a request from IIS is routed to machines, I can't understand which machine handles the request, currently it reaches machine B, I could see previous IIS log where it processed successfully in machine A IIS log.
I could see error 500 in machine B IIS log for each request that comes in but cannot make it to BizTalk app
No error log in the event viewer of A and B BizTalk servers.
Can anyone guide me how to resolve it?
Regards
Vivek

Hi Vivek,
If you get HTTP-500 error you will have eventlog entries, not just in IIS logs.
"How a request from IIS is routed to machines, I can't understand which machine handles the request, currently it
reaches machine B, I could see previous IIS log where it processed successfully in machine A IIS log." -
IIS would route to BizTalk machines, only if you have separate servers as webserver(IIS) and BizTalk. If IIS is host in the same servers as BizTalk, then when the IIS receive the message,
it would route to its standalone internal BizTalk server. The routing to different machines is due to the loadbalancer. Your statement is bit contradictory. I assume your IIS is local to the BizTalk servers. So when the client send the message to HTTPReceive.dll,
the url is bound to loadbalacer, which based on its load balancer logic route the message to anyone of the BizTalk server's IIS (machine A and machine B) hence you see two different IIS logs in machine A and machine B.
Many Load-balancers, I have seen work with a unique logic where they send the requests primary to one server always and only if that primary server is busy (or not available) then it would
send it to other server. May be load-balancer have been sending its request to mahicne-A until recently and may be due to some reasons its sending the request to machine-B now. The reason machine-B may not be working now, could be because it was never configured
properly before and when machine-B start to receive the message, it gives error(as load-balancer request are always handled by machine-A before). To prove this, stop IIS in machine-B and see machine-A receive the message.
For this HTTP-500 error, check the HTTPReceive.dll is configured correctly. Check the following articles for configuration:
Configuring BTSHTTPReceive.dll to work on IIS 7
http://www.biztalkbill.com/Home/tabid/40/EntryId/66/Configuring-BTSHTTPReceive-dll-to-work-on-IIS-7.aspx
http://social.msdn.microsoft.com/Forums/en-US/20ea5954-4ca8-40ca-b043-2e6c3d3ae105/btshttpreceivedll-remote-server-returned-an-error-500
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

HTTP trigger - Calling failed - 9.0.2.10000-71

Hi,
I have created a HTTP trigger in Premium licensed UCCX server (9.0.2.10000-71). When I try to call the URL from java application I am getting HTTP error code as “404”. However HTTP trigger calling is working fine in the servers with the version of 8.5.1.11004-25 and 9.0.2.11001-24.
Do I need to run any patch for the fix? Please provide suggestion to fix it.
Thanks
Rammipriya

Hi,
there are multiple issues with this whole setup:
1. You are getting a 404 status because this script does not return anything. Not a single byte of information. You should probably use a Send HTTP Response step with at least a plain text message.
2. You cannot use anything from the sun.* packages. There is no exception from this rule. If you were in my team, for writing such code you would be thrown out without any questions asked.
3. Although I see the point of this application (collect all files from the local file directory referenced by sysprop "uccx.customer.dir" I would not choose a slow and cumbersome protocol like FTP. I mean, if it's already a HTTP application, it would be a lot easier to get the files from the directory, zip them up (remember, both java.util.zip.GZIPOutputStream and java.util.zip.ZipOutputStream are available in JRE at least since 5.0) and send the zipped files over the already established HTTP connection. Fast and easy.
G.

HTTP Daemon is failing

Similar Messages

Maybe you are looking for