HTTP Error 411 "Length Required" when I try to call a service via POST

Hi All,
I've got a service I want to call from within Flex, and I used the Data/Services tab to setup the new service call. It's called "CommitChanges" and it's supposed to cause the server to commit the changes that were submitted, incrementally, during this session. You can think of it as being like a "save" command. It takes no arguments.
In keeping with the suggested use of POST for operations that causes changes to data on the server, I setup this request to use POST. However, when I try to call the service I get the following error:
Response Received:
Length Required
HTTP Error 411. The request must be chunked or have a content length.
If I change the request type to GET it works, but I'd like to get it working with POST.
-Josh

Right after Skype crash open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the most recent error messages. Copy and paste here the text from the General tab.

Similar Messages

DMS error HTTP error: 411 Length Required

Hi,
I am geting following error while creating the content repository on R/3 ( ECC 5.0 ).
<b>HTTP error: 411 Length Required</b>
If I click on ok make I am geting next popu error as follow
<b>HTTP error: 500 (Internal Server Error) "ContRep ZHTTP_HCP or Storage entry not defined"</b>
As per SAP note 925327 in need to apply the kernel patch 122 our current patch level is 101.As per the note there is one short term solution i.e. use SAPHTTP. But am not geting how to do that since we dont have the much time to apply the kernel patch at this step coz our golive data is very near i.e. 23-05-2007.
So please help me.
Thanks a lot,
Harshal

Hello Harshal,
I have the same error. Did you solve your problem ?
Dimitry

Invoking Xai Service from BPEL process (Error 411--Length Required)

Hi Friends,
I am trying to invoke xai inbound service webserive i.e WSDL from BPEL process, when i am testing the request i am getting the following error
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://190.12.19.100:6500/spl/XAIApp/xaiserver/CMMBC
when i open the above end point url in the browser:
Error 411--Length Required
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.12 411 Length Required
The server refuses to accept the request without a defined Content- Length. The client MAY repeat the request if it adds a valid Content-Length header field containing the length of the message-body in the request message.
pls help me out
thanks and regards
sivaram
Edited by: sivaram on Apr 21, 2011 6:56 AM

Yes we have got the same error while invoking from SOAP UI.
But wsdl alone is opening through browser.
But when we try opening the endpoint url we are getting the above error.
Please help!

ADFDi Error : The remote server returned an error: (411) Length Required

JDeveloper version 11.1.2.1.0
weblogic Version 10.3.5.0
Hi All,
From ADF Desktop integration application, When the user key in username and password the system show the following error message. Please help to me how to tackle it as well as useful blogs.
Regards
KT
Error Detail:
WebException: The remote server returned an error: (411) Length Required.
Source: System
Stack:
at System.Net.HttpWebRequest.GetResponse()
at oracle.adf.client.windows.common.internet.http.ManagedHttpResponse..ctor(HttpWebRequest request)
at oracle.adf.client.windows.common.internet.http.ManagedHttpRequest.GetResponse()
at oracle.adf.client.windows.datamanager.servletrequest.SyncRequest.BeginResponse()
at oracle.adf.client.windows.datamanager.servletrequest.TamperCheckRequest.InternalCallSyncServlet()
at oracle.adf.client.windows.datamanager.servletrequest.SyncServletRequest.CallSyncServlet(Boolean retry)
at oracle.adf.client.windows.datamanager.ADFBindingContext.SendSyncServletRequest(SyncServletRequest request)
at oracle.adf.client.windows.datamanager.ADFBindingContext.CheckForTampering()
at oracle.adf.client.windows.datamanager.ADFBindingContext.PreSyncServletTamperCheck()
at oracle.adf.client.windows.datamanager.ADFBindingContext.SyncModel(BindingContainer bc, String contentType)
at oracle.adf.client.windows.datamanager.BindingContainer.Repopulate()
at oracle.adf.client.windows.datamanager.BindingContainer.SyncModel(Boolean forceSync)
at oracle.adf.client.windows.excel.runtime.uicomponent.RTActionCollection.DoInvoke(RTColumnCollection parent, String contextLabel)

In which environment is your application hosted? Are there any other network components sitting between the client and the application, such as CDN or load balancer?
It would be very helpful if you can capture the client-side HTTP traffic using some tools (e.g. Fiddler - http://www.fiddler2.com/fiddler2/), so that we can know where the "401 length required" error is sent from by looking at the header of the HTTP response of the error.

I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3.

I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3. Everything else is activating fine. My ISP is XFinity. Anyone seen this? I have done a complete reset and restore, and have the latest software.

Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing." I am in the US how do I switch?

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

ANY ONE KNOW WHAT IS ERROR 3 IN ITUNES WHEN I TRY TO RESTORE

Please help ,what is (UNKOWN ERROR 3) in itunes when i try to restore ipad 3 to ios7 please help >
Does someone know how to fix it?

I am also facing the same issue.
four days back, my power buttton stopped working.
Then my sim card slot stopped reading like it was stuck at gsm/cdma band.
Even without simcard it said searching..
then I changed the power button and antenna strip myself as my iphone5 is uk ee and i live in india.
Everything was fine and I booted the phone.
The power button worked like a new device... but the searching problem still remained.
I hard resetted my phone but to no vail. even Find My phone was not turning off.
then I forced my phone to recovery mode and downloaded iphone5,2 7.0.2,11A501_restore.ipsw from web and flashed it.
At the start it recognised and everything was good until the "restoring iphone firmware" was stuck at the end point.
I tried every trick on net. Even tried to downgrade.. but it was blocked.
at the last it is either stuck at firmware or itunes unknown error (3)
Please somebody help me to recover this PAPERWEIGHT to a phone again...

Error 2615 - and -50 when i try to back up playlist

i either get error 2615 or -50 when i try to make back up discs- any help out there plz!!!! I have gone thru a stack of dvd-rs!!!!!!

Welcome to the Apple Community.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

Keep getting "There was an error downloading this product" when I try to download updates to Adobe Photoshop CS5?

Keep getting "There was an error downloading this product" when I try to download updates to Adobe Photoshop CS5? Uninstalled and re-installed program but still won't download updates? I have a Mac Book OS X Version 10.9.5.

If you're trying to update through the Help menu > Updates, you should know that the Adobe auto updater in CS5 and earlier versions is an unmitigated, monumental piece of cr@p. It Is totally unreliably and fails in one or another of a great variety of ways.
Adobe began to get their act together as of CS6, with which I'm staying for exactly the same reason you are staying with CS5.
One has to update manually, by looking for, downloading and applying any and all applicable updates, including the Adobe Camera Raw plug-in which comes separately.
If the latter is what you've been doing, you need to let us know where you are trying to download the update from, what browser you are using to attempt to effect the download, and what platform you are in.
You also need to disable any and all virus protection, and make sure you are not behind any active software or hardware Fire Wall.
This is the URL for Photoshop Macintosh updates:
Adobe - Photoshop : For Macintosh
and for Windows:
Adobe - Photoshop : For Windows
Next time, please be substantially more informative, rather than plaintive or narrative (see next post). You are not addressing Adobe here.
Thank you.

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

HT3951 I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

You can always finish the downloads in iTunes on your computer and then the TV Shows to the iPad. Launch iTunes and go to Store>Check for available downloads. Finish the downloads and then sync the iPad.
As far as trying to finish the downloads on the iPad .....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help?

Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

I just reinstalled Fireworks CS4 and it seems to be back to normal. Thanks

I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code

I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code

ok Can I tell when it is stopped or if it didn't work. It is still saying the same thing. I can't see a progress bar or anything. Do you have any idea how long it usually takes. Just curious so I know i din't make another mistake

HT1567 error -3 comes up when I try to burn a cd

error -3 comes up when I try to burn a cd from and itunes playlist

hi Tracy!
when itunes freezes up, just leave it alone, running nothing else on your computer, and within 1-3 minutes, itunes will begin to burn your cd
by any chance, are you running a Dell? used to see "two-minute hangs" sometimes under these circumstances with Dells back in the 4.9 days. (the thread where Dan and I troubleshot one has been deleted due to lack of activity, though.)
we got past that one by heading to the Dell website and checking for upgrades for that particular model of PC. may be worth following up on in your case.
love, b

HTTP Error 411 "Length Required" when I try to call a service via POST

Similar Messages

Maybe you are looking for