HTTP Header SOAPAction Problem

hi Everyone,
this is an extract of my test soap program:
SOAPConnectionFactory soapfactory = SOAPConnectionFactory.newInstance();
SOAPConnection connection = soapfactory.createConnection();
URL endpoint = new URL("http://url.asmx");
MessageFactory messagefactory = MessageFactory.newInstance();
SOAPMessage message = messagefactory.createMessage();
SOAPPart soapPart = message.getSOAPPart();
SOAPEnvelope envelope = soapPart.getEnvelope();
SOAPBody body = envelope.getBody();
soapFactory = SOAPFactory.newInstance();
Name insertNewUser = soapFactory.createName("insertNewUser","","namespace");
SOAPBodyElement bodyElement = body.addBodyElement(insertNewUser);
response = connection.call(message, endpoint);
response.writeTo(System.out);
connection.close();when i send the call, this the response from the server:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="...">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Server did not recognize the value of HTTP Header SOAPAction:.</faultstring>
<detail />
</soap:Fault>
</soap:Body>
</soap:Envelope>
This is my question:
How can I set the HTTP Header SOAPAction?
Thanks.
Roberto

Hi try out the following code.
MimeHeaders hd = message.getMimeHeaders();
hd.addHeader("SOAPAction", "http://tempuri.org/HelloWorld");This will add the SOAP Action header to ur HTTP headers.
Regards
Aditya

Similar Messages

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

Server did not recognize the value of HTTP Header SOAPAction: .

hello friends,
I am wrote a WebService client as below
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class AtmuClient
public static void main(String [] args) {
try {
String req="request";
String endpoint ="http://10.1.3.104/mims/service.asmx?WSDL";
String nameSpaceUri = "http://www.cum.com/MIMS";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName(nameSpaceUri, "echoString") );
String ret = (String) call.invoke( new Object[] { req } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
System.err.println(e.toString());
the out put I am getting is
Server did not recognize the value of HTTP Header SOAPAction: .
what still I need to incorporate to my code. Do i need to add any methods still ? and one more thing is do i need to write WSDD for this? how ?. can any bady guide me
thanQ for any greatful guidance.
HAN.

Try setting an empty header object for the Call
SOAPContext ctx = new SOAPContext();
Header header = new Header();
Call call = new Call("", "", params, header, "", ctx); Regards
Byju Joy

HTTP header insertion problem with ACE

Hi
I try to configure the HTTP header insertion feature based on the action-list type modify http. Unfortunately it does not works.
The config looks like that
action-list type modify http TEST
header insert both Host header-value test:test.
I added this action-list to the correct policy-map.
When I checked the snifer output on the server side, there is no test value in the HTTP header.
I test the same feature based on the "insert-http" command in the policy-map and this one works.
Could anybody help me with this problem?
Thank you in advance
Regards
Lucas

Hi Lukas,
Add a new parameter-map named PRMAP_PERST_REBLNC and add this to the policy map using command appl-parameter http advanced-options PRMAP_PERST_REBLNC as shown below:
action-list type modify http test-insert
header insert both My-Header header-value test
header insert both SSL header-value TRUE
policy-map type loadbalance http first-match HtppInsert
class class-default
serverfarm linux1-80
action test-insert
policy-map multi-match SLB1
class VIP-122-80
loadbalance vip inservice
loadbalance policy HtppInsert
loadbalance vip icmp-reply active
loadbalance vip advertise active
loadbalance vip advertise metric 1
connection advanced-options SetTos
appl-parameter http advanced-options PRMAP_PERST_REBLNC
parameter-map type http PRMAP_PERST_REBLNC
persistence-rebalance
Hope this will make all the packets are inserted with the http header not the first one only.
If it works then plz inform.
Kind Regards.
Sachin Garg

Src IP HTTP header insertion problem

I have configured a vserver to loadbalance to 2 proxy servers over TCP port 8080.
I use a policy to insert the source ip address of the client workstation to be
inserted in the HTTP header.
We use the same vserver to loadbalance HTTPS traffix.
Appearantly the CSM also tries to insert the ip address when HTTPS traffic
is passing this vserver.
Is this a correct beheavior? How can I solve this one?
Thanks!
Regards Wim

Actually mozilla lets you specify different ports for proxy http and proxy https.
Anyway, are the servers behing your CSM proxy servers ?
Do you have 'persistent rebalance" configured ?
If so, could you try to turn do 'no persistent rebalance' and see if that solves your problem.
Normally, https connection via a proxy are still done with HTTP connection with the request "CONNECT x.x.x.x:443" and the CSM should be able to inset the requested info.
But we need to avoid the CSM to inspect further packets as this would be ssl traffic -> so disable peristent rebalance.
Just an idea.
Regards,
Gilles.

HTTP header size problem

We have been using weblogic to serve the jnlp for a while now (there is a servlet that generates jnlp and sends to client) without any problems. Yesterday the following error occurred for the first time and the server stopped working. Does anyone have a clue as to in which situation can the header size exceed this limit? After restarting the server, it started working properly again.
weblogic.socket.MaxMessageSizeExceededException: [Incoming HTTP request headers of size 4129 bytes exceeds the configured maximum of 4096 bytes]
at weblogic.socket.MuxableSocketHTTP.incrementBufferOffset(MuxableSocketHTTP.java:111)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:245)
Thanks.

My first reaction was that if you are using version protocol, and if you had many versions of some resources in the cache, maybe the request from java web start kept growing with each version.
http://xxx.com/yyy/zzz.jar version="1.9"&current_version="1.1"&current_version="1.2"&current_version="1.3"...
but in that case can't see how restarting the server would help.
/Dietz

Any Soap Service / http header

http header "SOAPAction" is not routed from proxy service to business service and to the external web service
Please see follow steps that would describe the case
1. I developed a Proxy Service of type "Any Soap Service". This is because I dont want to generate a WSDL for the proxy service and give it to the clients. I just want to give them an URL and whatever the SOAP message they send, this proxy service will receive.
2. I developed a Business Service of type "Any Soap Service" The end point of this business service is an external web service. I dont want to use the external web service WSDL, but just the endpoint URL.
3. In the proxy service I developed in the step 1, I added a routing action and invoked the business service.
When a ws client now invokes the Proxy service with a soap payload (body), proxy service takes the payload and routes it to the business service and business service sends the payload (body) to the external web service. business service recieves the soap response back from external service and passes it back to the proxy service and thus client gets the response back from the proxy service.
What is missing is the http header "SOAPAction" passed to the proxy service by the ws client is not passed to the business service and hence not to the external web service. I want to pass the SOAPAction and all http headers sent by the ws client all the way to the external web service.
Do we have to programmatically extract SOAPAction and pass it to the external web service?
Your ideas please.. TIA
Edited by: GDD on Dec 3, 2009 6:32 PM

I used Message flow Communication/TransportHeader component to copy soapaction from Inbound request. This enabled transport headers to be passed.
would like to hear if there are other options.

ESB requires "SOAPAction" to be set in HTTP header?

I'm trying to insert an ESB flow between an existing web service and client. The service and client were previously built with Apache Axis.
By generating an appropriate WSDL (doc/wrapped rather than Axis' default RPC style) for the existing service, I'm able to connect the ESB to the service.
The problem is that the existing client (built using Axis) sets the SOAPAction in the HTTP header to empty (SOAPAction: ""), and the ESB appears to require this to be set to the desired operation. If this is a hard requirement, then I can't directly connect the existing client to the ESB flow.
So, the question is whether it's possible to have the ESB relax the requirement for the SOAPAction header. And if so, how?
If I can't get the ESB to accept SOAP requests with an empty SOAPAction, then I'll have to create a custom adapter or insert an additional proxy layer (yuk). Anyone else have any suggestions?

This is all done automatically by FB.
Just to try something out I just now made a simple app with a label only and tried to upload to Google... FAILED!!!!
"Market requires versionCode to be set to a positive 32-bit integer in AndroidManifest.xml"
LOL, FB can't even create this. :-/
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/3.1">

Message was edited by: KesherMedia.Com

Problem setting Unicode (utf-8) in http header using tomcat

Hi:
I am trying to set a file name in utf-8 to http header using the following code:
response.setContentType("text/html; charset=utf-8");
response.setHeader("Content-disposition", "attachment; filename=解決.zip");
// I actually has file name in utf-8 here to set to the header, and I know that the name is correctly
// and I also looked into the response object MimeHeaders object and saw the head is correctly there
then write the content of zip file using ServletOutputStream.
The problem I have is that the file name is not displayed correctly when prompted to save or open in the pop up window next. I found out using Fiddler that the request header is wrong:
Content-disposition: attachment; filename=�zn��.zip
I am using Tomcat 5.0.28. Any idea how to get this working?
Thanks in advance!

You are setting the charset for the content to be UTF-8. (That is why the method is called setContentType.) But HTTP headers are not part of the content and so that has no effect on the header.
The original specification for HTTP only allowed US-ASCII characters in headers. It is possible that more recent versions have features that allow for non-ASCII header data, but I don't know if that is the case or how you would use those features if they exist.

OSB http Header Problem

Hello all,
(I hope I'm right here with my Oracle Service Bus problem)
I have a Oracle Service Bus Proxy Service, that calls a Business Service (not in my control).
That business service is somehow crap, cause it doesn't respond correctly (in sense of http protocol):
POST / HTTP/1.1
Content-Type: text/xml; charset=utf-8
User-Agent: Java1.6.0_05
Host: somehost.net:8080
Accept: text/html, image/gif, image/jpeg, */*; q=.2
Connection: Keep-Alive
0093
<?xml version="1.0" encoding="UTF-8"?>
<somePayload/>
0000
*<TheResponse/>*
<TheResponse/> is all i get from that service. No http header..
My Proxy service doesn't like responses with no HTTP/1.1 200 OK
and returns an error (although its a correct answer.. from the service)
Is there a posibility to avoid this error and get the plain response instead?
Thanx in advance
Pat

You're right, that service doesn't respond correctly as defined by HTTP. I don't think there is an out of the box feature in OSB you could use to overcome this.
However, you can possibly write your own transport implementation as described here:
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/transportsdk/architecture.html
There's also sample implementation that could be useful:
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/transportsdk/example.html

Problem adding HTTP header to request

Hi all,
My company is wanting to access our Adobe Connect through our
SAP portal without requiring the user to stop and enter their Adobe
Connect password.
The documentation available says that this should be possible
using a combination of SAPSSOEXT (to interrogate the SAP ticket and
authenticate the user coming from the SAP portal) and HTTP header
authentication within Adobe Connect (by inserting the authenticated
username into a custom HTTP header).
However the problem is that I'm intending to use Java, but I
can't find any Java functionality that will allow me to add a
header into an HTTP request.
Has anyone done anything like this before? Any ideas on how
to go about it?
Thanks in advance,
David

In 10.1.3.5, there were several examples or samples in the Oracle BPEL folder. I think there were ones called HTTPGetService and HTTPPostService. You might check to see if they are still around.

How can I set "SOAPAction" http header using SAAJ

When I send soap request, http header's like below
SOAPAction: ""
But, I'd like to send like this
SOAPAction: "http://tempuri.org/HelloWorld"
How can I that using SAAJ ?
My code is
String xml = "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n" +
"<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n" +
" <soap:Body>\n" +
" <HelloWorld xmlns=\"http://tempuri.org/\" />\n" +
" </soap:Body>\n" +
"</soap:Envelope>";
Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(new ByteArrayInputStream(xml.getBytes()));
DOMSource domSource = new DOMSource(doc);
SOAPMessage message = MessageFactory.newInstance().createMessage();
message.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "utf-8");
message.setProperty(SOAPMessage.WRITE_XML_DECLARATION, "true");
message.getSOAPPart().setContent(domSource);
message.writeTo(System.out);
SOAPConnection connection = SOAPConnectionFactory.newInstance().createConnection();
SOAPMessage response = connection.call(message, helloURL);
connection.close();
SOAPBody body = response.getSOAPBody();
if ( body.hasFault() )
SOAPFault newFault = body.getFault();
System.out.println("SoapBody has fault.");
System.out.println("code=" + newFault.getFaultCodeAsName());
System.out.println("message=" + newFault.getFaultString());
System.out.println("actor=" + newFault.getFaultActor());
else
System.out.println("Call Successed.");
System.out.println(body);
}

message.getMimeHeaders().addHeader("SOAPAction", "http://tempuri.org/HelloWorld");

Problems with http header "Content-Location"

Does anyone know how to override the
"Content-Location" http header. We are having issues with search engines and this header being returned from Apache/oc4j. In a nutshell, I have a site that uses the
Struts framework, where the actual urls submitted would be for example
(http://mysite/home.do), where ".do" is just a servlet mapping. When we have
tried to follow the one link that has been spidered, it actually contains
the full path that appears in the "Content-Location" header (i.e.
http://mysite/web-inf/jsps/bogus.jsp) which in this case can't even be
accessed. The feedback we get from third-party utilities that try to spider
the site is that it is stopping because it has already indexed "bogus.jsp",
which in reality will always appear since it is a template, where the actual
urls will be different as is above.
Because the "Content-Location" header is being returned to any
client hitting the site, search engine spiders stop indexing at the first page because the value in "Content-Location" is the same.
Solutions tried:
mod_headers in Apache - have tried "Header unset"
HttpServletResponse.setHeader()
Any help would be appreciated

Hi there,
i'm having a similar problem to this when trying to run some web page speed optimisation software...
i think the issue also causes problems with the Opera browser (although this may have been fixed in the latest version).
anybody any ideas how to stop the header being sent in the response?
many thanks,
Andy

BPEL HTTP Header Problem

Hello @all
I�m new to Open ESB and NetBeans.
Does anybody has an idea how to put HTTP-Header to the BPEL-Process?
I have to call a WebService (from BPEL) which expects user authentication (sessionId) in the HTTP-Header . How do I do that? Do I have to modify my WSDL-File?
Thanks for your posts in advance

You would have already defined your WSDL accommodating this requirement. If not, then yes, you might have to change your wsdl.
Assuming you are sending the user info all the way from the BPEL process and assuming soap-http protocol. Typically the way i see this done is, you define a wsdl message with the parts that correspond to your business logic and parts that you would use in the "soap headers". In the BPEL it is always "business as usual" you deal with the abstract wsdl message. It would be developers responsibility to fill the wsdl message parts correctly. Once this message goes through the soap-http BC, it would be the BC's job to then put things as required by the HTTP protocol.
hope that helps,
Kiran B.

HTTP header and Filter: problem

Hi,
Let's suppose I need to check HTTP header values for some reason. I created a filter to analyze request information before passing it to servlet.
Anyway filter's method doFilter() takes a ServletRequest as a parameter, not HttpServletRequest, therefore I can't use HttpServletRequestWrapper and its method getHeaders(). ServletRequestWrapper does not have such a method. Casting from ServletRequest to HttpServletRequest won't work - Weblogic does not allow this.
Anyway I need to extract headers information for the request and I know for sure it is an HTTP request, of course.
Does anyone here know how can I extract header information in this case?

Anyway filter's method doFilter() takes a
ServletRequest as a parameter, not
HttpServletRequest, therefore I can't use
HttpServletRequestWrapper and its method
getHeaders().However you are actually getting an HttpServletRequest object as your actual parameter, so just cast it to HttpServletRequest and do what you need to do.

HTTP Header SOAPAction Problem

Similar Messages

Maybe you are looking for