HTTP Receiver adaptor and query string posting

What woudl be the configuration of HTTP receiver adaptor in this kind of situation. I added some strings to the Prologue section of the receiver adapter but does not seem to work.
http://help.sap.com/saphelp_erp2005/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
I just need to ge the XML body in cmxl = {whole xml body}
does not work..any help would be highly appreciated

Hi,
Pls try this...
the value in the prologue field should be...
prologue : "field1=val1&field2=val2&cxml="
the http body is created by appending prologue with the xml payload and the epilog(if present)...
also pls make sure that the content-type set in the adapter is correct for your scenario...for example "application/x-www-form-urlencoded" would be the appropriate type for a normal html form post using http.
Thanks & Regards,
Renjith

Similar Messages

HTTP Sender Adapter - URL / Query String - Posting problems ?

Hi All,
Scenario: Partner sending order request via HTTP adapter to XI
I have configured my scenario and this is a sample URL I gave to Partner but when they try to post, they get "Connection Failed" error.
http://server.cmpny.com:1234/send/test/message?
service=Send_Order
&namespace=urn%3Asap-com%3Adocument%3Asap%3Aidoc%3Amessages
&interface=ORDERS.ORDERS05
&party=ABC&qos=EO/
Party Name : ABC
Service : Send_Order:
Interface: ORDERS.ORDERS05
Namespace: urn:sap-com:document:sap:idoc:messages
This partner has been "successfully" exchanging data for other messages using the same hostname/userid/passwd, so is there any problem my URL encoding ?
Any help is appreciated
Bob

Hey
i m not sure how u generated the URL for the scenario but the best approach would be to use the following HTTP test tool for it
/message/266750#266750 [original link is broken]
just use the code given by Mr.Stefan Grube .
secondly instead of host name ,give the IP address of the XI server.
Thanx
Aamir

Action and Query-String in HTTP Adapter

Hi,
I am doing an IDOC -> SAP PI -> HTTP scenario
HTTP application is external party (using Party).
I have to build the URL Dynamically; so I use Dynamic Configuration in Message Mapping.
The URL format (from help.sap.com) is http://<hostname:port>/<path>?<query-string>
Hostname and port are know to me.
From where will I get information about path and query-string , are they mandatory?
help.sap.com has given details about sender HTTP: http://help.sap.com/saphelp_nwpi711/helpdata/en/44/8f54b8b01e3673e10000000a114a6b/content.htm but i want to know about receiver HTTP.
Is there any example available?
Thank you,
Pankaj.

> So I have to ask the External Parties to send the message (to SAP PI) to the URL (http://hostname:port/<action>?<query-string>)?
When you replace the varaibles, yes.
> Any idea about my original question (about action and query-string in receiver channel's URL) or should I use a RFC destination there (now it will be Type G I suppose)
Just put the URL of the receiver.
> There is SSL configuration also between External Parties and SAP PI (if this information is required).
In that case, you put a URL with https://..

Mod_plsql: /pls/apex/f HTTP-400 Missing '=' in query string or post form

This is the message when I click the logout button. It destroys the session though. It should redirect to login page after clicking logout button.
We are on Apex 4.1
Bad Request
Your browser sent a request that this server could not understand.
mod_plsql: /pls/apex/f HTTP-400 Missing '=' in query string or post form
Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at xxxx.xxxxx.edu Port 443
Edited by: 965704 on Oct 30, 2012 11:42 AM

It has been fixed but the new problem is: After signout, if I move back to previous page and click some link using <- sign then I suppose to get the login page, but i am getting
ORA-44004: invalid qualified SQL name error message.
The source for my login page is
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':1'
);

HTTP receiver adaptor

Hi all,
   I am using HTTP receiver adaptor to connect to an external system.Here I have to pass an Idoc from SAP to one folder in the target host where the application is installed.
     My question is without using FTP adaptor(only with HTTP) can i send this Idoc to The folder in the target?
If yes , What should i give the "path" field in Receiver HTTP adapter? I tried giving the folder name, but it was throwign an error 400.
     I created connection G in XI.I put some xml file (KK.xml) as path there and tested the connection it was working fine. Could you please help me out with this?
Thanks
Kiran

Hi Kiran,
You are talking about saving a file in the target director using HTTP Receiver adapter... As per my knowledge it is not possible in a straight fwd. The target should be a web application (obviously) which should recieve the data/xml that HTTP adapter is sending and then should save it in the respective directory. XI HTTP adapter will not do that job for sure. When you use HTTP adapter in XI its job is to deliver the message to the given URL thats it. If XI need to save it as a file then its thru File NFS/FTP.
FYI :
HTTP - Hyper Text Transfer Protocol
This can carry only texts but not a file
FTP - File Transfer Protocol
This is used for transfering files.
If HTTP is mandatory in your scenarion, then then a wep programming to be done at the target end (ASP/ASP.NET/JSP/Servlets/etc..)
Thanks,
Prakash

HTTPS Receiver Adapter with POST and query String

Hi there,
we are currently running a http connection with an external partner. We use the plain http adapter to send documents.
Now we want to secure the whole thing and switch to https.
Currently we solely use the comm. channel in the directory. In the URL we include the required query string (http:/xxx/yyy<b>?msgtype=order</b>)
As I understand, the only way to use httpS is to use a RFC Dest. Type G in sm59.
But I am not able to add a query to the url there.
I guess that it is not an option to ask our partner to search the posted document for parameters. We were already happy that they were able to do it like we have it.
Does anyone has an idea how we could include a query in the url or give somehow the partner explicitly the info about the message type we send?
Thanks in advance,
Helge

Hi Helge,
as far as I know this should be possible with SP16 by using the settings in the adapter configuration.
We had this requirement, but with SP15 it isn´t possible.
Have a look on the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Chapter Adapter-Specific Message Attributes
There you can use up to 6 URL Parameters. I never used it, if you have SP16, try it.
Regards
Thomas

UiXML and query string parameters

Is there a simple way to access a query string parameter within the destination page?
Example:
- in my source page I have something like:
<link text="My page destination"
destination="page?param1=value1" />
What I want is to be able to acces directly to the param1 within page.uix without handling events or writing any kind of java code.
I have tried to use ctrl:page, ctrl:eventResult or ctrl:servletRequest without success (thought it was not the right thing to do but gave it a try anyway).
As i understand (?) the doc query string parameters are event parameters:
- does it mean we can only deal with query string parameters in an event handler?
Oscar

Hi Oscar -
As i understand (?) the doc query string parameters are event parameters:
- does it mean we can only deal with query string parameters in an event handler? Right. The UIX Controller allows you to pass data to a new page using URL parameters in one of two ways: as event parameters - in which case you need to have a corresponding event handler - or as page properties. So, the built-in data providers that are supported by the UIX Controller (ctrl:page, ctrl:eventResult) are designed for supporting these two mechanisms.
If you do not want to write an event handler, then you could consider using page properties to pass your parameters. The following link shows how to use the pageURL bound value to construct a destination which includes a single page property:
<link text="Go to target page" xmlns="http://xmlns.oracle.com/uix/ui">
<boundAttribute name="destination">
<pageURL name="targetPage" xmlns="http://xmlns.oracle.com/uix/controller">
<properties>
<property key="prop1" value="value1"/>
</properties>
</pageURL>
</boundAttribute>
</link>
And the following sample shows how to bind to the same property:
<styledText data:text="prop1@ctrl:page"/>
Andy

Another bug in Flex? (Application.parameters and query strings)

I'm passing in two query string parameters in the source of SWFLoader and both of them are clumped together in the first parameter by application.parameters.
But I switch the order of the parameters in the query string and both parameters are returned correctly:
Case #1:
Query String: ?cfg=zzzzzzz54B&embed_div=x
parameters.cfg: zzzzzzz54B&embed_div=x
parameters.embed_div: [nothing]
Case #2:
Query String: ?embed_div=x&cfg=zzzzzzz54B
parameters.cfg: zzzzzzz54B
parameters.embed_div: x
Here is the actual debug commands:
Dumper.info(this.url);
Dumper.info(this.parameters.cfg)
Dumper.info(this.parameters.embed_div);
And output:
(Case #1)
[INFO]: file:///C:/Program%20Files/WordRad234/chm/wordrad_kt/web%20pages/zzzzzzz5/rad_3xf.swf?cfg =zzzzzzz54B%26embed_div%3Dx (String)
[INFO]: zzzzzzz54B&embed_div=x (String)
[INFO]: (Object)
(Case #2)
[INFO]: file:///C:/Program%20Files/WordRad234/chm/wordrad_kt/web%20pages/zzzzzzz5/rad_3xf.swf?emb ed_div=x&cfg=zzzzzzz54B (String)
[INFO]: zzzzzzz54B (String)
[INFO]: x (String)
Something I just noticed: the equal sign after embed_div is replaced by %3D but only if embed_div comes last.

NEVERMIND:
It was something I was doing to the source of SWFLoader beforehand (involving encodeURIComponent).
I have to say, I have many, many times thought something was a bug in Flex and it was in fact my code. In general, I think Flex/AS3 is an elegant and useful product. The sort of ad hoc tweaks that have to be done to avoid memory leaks though is ridiculous (though I do have that figured out pretty much as well.)

Doget and query String

how to use "doget", any example for me reference.
if i would like to pass the variable by querystring, can i add the variable in URL like this:
go home
but how can i get the ID in query string in home.jsp???

1. I can't understand the line of code that you just gave
What are you trying to put as the query string is not clear to me. If you are thinking that that code will call the toString method on any ID object, then it won't
2. To access the value of the ID parameter in home.jsp, you can use scriptlets or EL
<%=request.getParameter("ID")%>
${param.ID}

Get current page address and query string into Flex

Hello!
How can I get the current address in the address bar into
Flex please? (As $_SERVER would in PHP for example)
Thank you!

"M*A*S*H 4077" <[email protected]> wrote in
message
news:gob8lp$ke1$[email protected]..
> Aha, so there is no predefined Class in Flex for this?
>
> Thank you, Amy!
That is the class. You might want to look at FABridge,
though, because I
think it is designed to help ease these things.

HTTP sender adapter and receiver adapter

Hi guys,
I have a scenario that I have to communicate with an HTTP server with XML over HTTP.
When the communication is opened by me I will use an HTTP receiver adapter and give the connection parameters.
a) Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
b) When the communication is opened from the HTTP server, they have to type the URL in order to invoke the correct scenario on my side, right? I know that I do not have to use an HTTP sender adapter. They have to call the http URL, followed by the sender business system, sender interface name/namespace etc.
That means that the URL in the format: http://XIhostname:port/ is not enough right?
Is there a way to figure out from the type of the XML sent which scenario will be executed in XI?
Because it is difficult for them to use different URL when they are sending me different type of XML's, i.e. different requests.
Evaggelos

>>Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
Yes,receiver adapter is linked to receiver agreement,if you have different inbound interfaces then it means you need to have diferrent receiver agreement,hence different receiver communication channels.
>>That means that the URL in the format: http://XIhostname:port/ is not enough right?
No,its not,there is a test tool on SDN called "HTTP test tool".just search for that and download on your desktop,it will help you generate the correct URL as well as test the scenario by sending sample HTTP request.
One thing you need to keep in mind is that HTTP scenarios don't require and sender communication channel or sender agreement.they only need configurations on receiver side
Thanx
Aamir
FYI:Here is the test tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Edited by: Aamir Suhail on Jul 3, 2008 12:18 PM

Example to use Query String in Oracle Access Manager Policy.

Hi All,
Can any one please tell me what is the use of Query String and Query String Variable in OAM Policy?
If possible please explain with a sample example.
Thanks in Advance.
Siva Pokuri.

Query string is used to protect URL with complete query string.
Ex: in case you want to protect http://hi.com/first.html?uid=abc&pqr=123 URL then you will specify query string as uid=abc&pqr=123.
In case you want to protect a URL with one of the query parameter as xyz and you do not care of other query parameters, then query string variables are used.
Ex: in case you want to protect http://hi.com/first.html?uid=abc&pqr=123 and http://hi.com/first.html?uid=abc&pqr=456 both with same policy then you will create a policy to protect first.html and in query string variables you will specify uid=abc.
Let me know if you have any problems in understanding this.
Thanks
Kiran Thakkar

Handling korean charset in Query string

I'm testing final release of S1AS7 SE.
When a query string is urlencoded, parameter value using korean charset was properly processed.
When not urlencoded, parameter value using korean charset was broken. Though Tomcat4 returns correct value.
S1AS and Tomcat returned different Query length. Yes, S1AS returned incorrect length.
It seems that NSAPIConnector fails to handle http request correctly when query string contains korean characters.

use static sql whereever possible (not tested).
CREATE PROCEDURE abc(empid IN VARCHAR2) AS
    v_query VARCHAR2(32767);
    v_where VARCHAR2(1000);
BEGIN
    IF (prefer_this_construct)
    THEN
        INSERT INTO mytable
            SELECT efirstname, elastname
            FROM   employee
            WHERE sickdate BETWEEN hiredate AND
                   nvl(officialdate, to_date('01/01/9999', 'mm/dd/yyyy'));
    ELSE
        v_query := 'insert into mytable ' ||
                   'select efirstname, elastname ' || 'from employee ' ||
                   'where sickdate between hiredate and nvl(officialdate, :officialdate) ';
        EXECUTE IMMEDIATE v_query
            USING to_date('01/01/9999', 'mm/dd/yyyy');
    END IF;
END;
/Message was edited by:
Kamal Kishore

ICM_HTTP_TIMEOUT error in HTTP Receiver adapter

Hi
I am doing HTTP Receiver adapter and File Sender adapter for my scenario.
I am getting the following error in SXMB_MONI.
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 402 reason ICM_HTTP_TIMEOUT</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error
Help needed,

Hi Ganesh,
Check this weblog...
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Check this thread with similar issue...
ICM_HTTP_TIMEOUT
Regards,
Sridhar

Parameter in HTTP receiver adapter

Hey
My requirements are:
I am sending an XML to an external system. Documentation says: "XML should be in a parameter in your request called 'xmlInput'".
How do I actually put my XML in this parameter? Does this have anything to do with the URL Parameters in comm channel configuration?
I have configured a client proxy, http receiver adapter and a communication channel in sm59 and they work OK, but it seems as I don't send the XML in this parameter.
Appreciate your help!
regards Ole

Hey!
Thanks for your answers.
Nana, are you sure of this, that java proxy is the only way I can put the XML in a parameter? I only need to confirm this because there is no place in their documentation that this is stated explicitly, I have only been told this via their technical person...:)
I agree that this is a limitation of the receiving system, and I know that this system is not up to date as I can tell from what they are saying and their documentation.
regards Ole

HTTP Receiver adaptor and query string posting

Similar Messages

Maybe you are looking for