HTTP Server - change port 7777 to 80

Hi all!
I have installed, in Linux_x86 (Enterprise Linux), a database 10.2.0.1, the HTTP Server from companion CD and the Apex 2.2.1.
I want to change the default port of HTTP Server 7777 to the port 80.
For that I change the httpd.conf:
port:80
listen:80
then I follow the manual of administration of HTTP Server and I done:
as root - chown root .apachectl
chmod 7560 .apachectl
I change again to user oracle and I tried to restart the HTTP Server but i can't.
error:
RCV: Permission denied
Communication error with the OPMN server local port.
Check the OPMN log files
Now, I only can start the HTTP Server with the user root.
Is that normal? I missed something?
And now I can access the page of the http server but i can´t reach the Apex - when I write http://hostname/pls/apex - the browser change it to http://hostname/pls/apex/apex and gives the following error:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at oracle.com.pt Port 80
Thank you in advance,
CD
Message was edited by:
user524118

Hi,
I have a similar problem.
Could you please write down how you solve your problem.
regards,
Mzz

Similar Messages

No Http server on port 8080 with 10g Express Edition ( TNS-12631 error)

I downloaded the Oracle 10g Express Edition for Microsoft Windows and tried to install the software on 3 pcs.
2 pc works but mine is not working.
All works well during installation but when I want to connect to the home web page, it displays error (http://127.0.0.1:8080/apex)
It isnormal because I have no process running under 8080 port.
But I don't know why there is not an http server on port 8080.
netstat -a :
Connexions actives
Proto Adresse locale Adresse distante Etat
TCP LABOLLC:epmap LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:microsoft-ds LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1521 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:42510 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1051 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1255 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1291 localhost:1292 ESTABLISHED
TCP LABOLLC:1292 localhost:1291 ESTABLISHED
TCP LABOLLC:netbios-ssn LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1338 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1342 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1355 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1359 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1472 messagerie.castel.fr:epmap TIME_WAIT
TCP LABOLLC:1473 messagerie.castel.fr:1026 TIME_WAIT
UDP LABOLLC:microsoft-ds *:*
UDP LABOLLC:isakmp *:*
UDP LABOLLC:1027 *:*
UDP LABOLLC:1339 *:*
UDP LABOLLC:1340 *:*
UDP LABOLLC:1356 *:*
UDP LABOLLC:1357 *:*
UDP LABOLLC:1427 *:*
UDP LABOLLC:4500 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:1028 *:*
UDP LABOLLC:1062 *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:netbios-ns *:*
UDP LABOLLC:netbios-dgm *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:42508 *:*
The file sqlnet.log contains the following comments :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-MARS -2007 16:28:39
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
I don't know what to do !!
Help

Yes i Check all that.
For example, I have Tomcat installed on my PC and I can launch it easily.
So that means that port 8080 is completly free.
No I haven't http service as you can see with netstat results.
Lokk at the log sqlnet.log, I have following :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-MARS -2007 14:46:35
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Thanks

Difference between HTTP Server port and HTTP Server listen port

Hi,
What's the difference between the following?
Oracle HTTP Server port = 7780
Oracle HTTP Server listen port = 7781
They are the ports used in my 9ias 9.0.3 instance.
Please advise.
Thank you.

Hi,
The server port, 7780, is port where HTTP server response and listen ports are other ports tha HTTP Server can listen. In IAS, the default configuration, the server port is response for Web Cache and Web Cache connect with HTTP Server in listen port.
Marcio Mesti

As9i R2 Oracle HTTP Server at Port 80

I installed the Application Server 9i R2 , but would like to make the Port 80 to be the Standard Port of the Application Server
already it is Port 7777 or 7778 as Standard !
what can i do ??
thanx :)

You can do it with Oracle Enterprise Manager Web. Point your web browser to
http://<application server>:1810
Login with username "ias_admin" and password that was set during installation.
Then you should select your Oracle Application Server instance under "Standalone Instances".
You will get "System Components" list, just click on "HTTP Server".
On next page, select Server Properties under "Administration".
If you are using web cache, you should change only listening port to 80, and if you don't change also default port.

10g Express Edition install doesn't start HTTP server on port 8080

I've just done (several) installs of 10g XE on a Windows XP (SP2) box which appears to install correctly, but there's nothing listening on port 8080 (which is available)
The services OracleServiceXE and OracleXETNSListener are both started (and can be stopped/restarted too).
Looking in C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log (and other log files in that directory), I see some worrying lines like this:
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12638: Credential retrieval failed
Also running SQLPLUS from a CMD window fails:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus sys
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 19 15:31:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12638: Credential retrieval failed
I already have some Oracle client software installed, PL/SQL developer 7.0.1.1066.
ORACLE_HOME is not set.
Is there an installation log file I can examine that might indicate what's gone wrong?
Tony.

Interesting error. See http://oracle-unix.blogspot.com/2007/08/ora-12638-credential-retrieval-failed.html for a blog entry (and workaround).
As for the 8080 web connection failing, I assume that this is related - the listener unable to hand off the web browser request to the Dispatcher.
Also note that by default it only listens on localhost port 8080. So using the hostname or IP of your machine won't work until that default config is changed.

Lion server change port?

Hello everyone,
I know that the web port for lion server is 80. But I would like to change it to 8080 as my ISP blocked 80. How can I change this on my lion server?
Thank you very much!

Ah, I've recently worked this one out for my mail server
In 'Mail' on the server.app tick the 'Relay outgoing mail through ISP' box and then click edit.
in the 'Outgoing Mail Relay' box entery your mail relay and add the port you want to use after the address.
I'm using dnyDNS so for me it looks like this outbound.mailhop.org:2525
Then enter you account login details and you should get the outbound mail servier to work.
As a side topic - once i have this set up my server emails all the alerts set up in the 'Alerts' window.
For the input port I have dnyDNS (Dyn Email Gateway) setup as a relay and forwarding the mail on port 2525 then use my routers port mapping to map port 2525 to port 25 on my server.
One thing that caught me out when I set it up was the spam filtering setup, which turns the incoming mail around to see if it's resent. this is the correct behaviour but to test the mail setup it's best to turn it off until you have everything else running.

Getting the HTTP server name, port and context name inside the init()

I have a servlet which is initialized when the Web server comes up. Is there any way I can print the complete URL from this servlet?
I am aware that this can be done by using request object. But note that in this case, there is no request object. All we have is the ServletConfig and ServletContext.
Pasting a part of my code here.
public class MyInit extends HttpServlet
private ServletContext m_servletContext = null;
public void init(ServletConfig config) throws ServletException
super.init(config);
m_servletContext = config.getServletContext();
//System.out.println("Print the URL here...")
}

Only a request has a URL. It's possible for servlets to be mapped to respond to more than one URL, and the server can be configured to respond to more than one host and at more than one port. So none of those things you are asking for have any meaning without an actual request.

ISSUES WHILE STARTING HTTP SERVER FOR A NEW INSTALLATION OF 10G AS

I installed 10g AS version 10.1.3.1. I am having this issue while running the installation:
The Configuration assistants are failing with the following error:
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=621769602,pid=30999)
failed to start a managed process after the maximum retry limit
Log:
/opt/dba/oracle/product/10.1.3.1/OracleAS_1/opmn/logs//HTTP_Server~1.log
Configuration assistant "Oracle Process Management and Notification Configuration Assistant" failed
I am using a staticports.ini file with the following values
Oracle HTTP Server port =81
Oracle HTTP Server Listen port = 81
Oracle HTTP Server SSL port = 444
Oracle HTTP Server Listen (SSL) port = 444
I am not sure what the following are for and what values i should for them so i commented them
#Oracle Notification Server Request port = port_num
#Oracle Notification Server Local port = port_num
#Oracle Notification Server Remote port = port_num
#ASG port = port_num
Has anyone encountered this issue ??

Port numbers less than 1024 are privileged ports on Unix/Linux. In order for OHS to run on one of the privileged port (e.g. 81 and 441 in your case) you must enable OHS to run as root. By default OHS runs a non-root user, the user that installed Oracle Application Server.
So to start with installer do not specify custom (static) ports and complete the installation. OHS will be assigned some non-privileged port by installer. Post installation follow the instructions here to change the ports to 81 and 441:
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/ports.htm#CIHJEEJH
Thanks
Shail

Port 7777 in use, but cannot identify what is using it...

Hi, all~
I'm having a problem with a Oracle Enterprise Linux 5.2 template (that has since been upgraded to 5.5).
When I do a "netstat -an | grep 7777", I get the following output (where the x's are the IP of this machine):
tcp 0 0 x.x.x.x:7777 0.0.0.0:* LISTEN
So, there's -something- listening on 7777.
My first guess is that there's an Oracle HTTP server install somewhere on the machine, as that's it's usual port. But doing a "ps -elF | grep httpd" comes up empty. But the strange thing is that if I open a browser to http://x.x.x.x:7777, I don't actually get 404'd - I just get a blank page. So something responded to that http request, just didn't provide any output.
Ok, well, back to netstat... I did a "netstat -npl" in an effort to get a PID associated with the process that's listening to that port, but for that entry, no PID is provided:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:3872 0.0.0.0:* LISTEN 2473/emagent
tcp 0 0 x.x.x.x:7777 0.0.0.0:* LISTEN -
tcp 0 0 127.0.0.1:65291 0.0.0.0:* LISTEN 3868/nmz
tcp 0 0 0.0.0.0:686 0.0.0.0:* LISTEN -
Poking around online, a lot of people suggested trying out the lsof command... so I did, but "lsof | grep 7777" also comes up empty.
So... any suggestions of things to try to help sort out what is actually running on 7777?
Thanks in advance,
- Nathan

Here is a list of ports used by Oracle:
http://www.red-database-security.com/whitepaper/oracle_default_ports.html
Oracle HTTP Server listen port / Oracle HTTP Server port 7777 Oracle Application Server Edit httpd.conf and restart OHS
There is also $ORACLE_HOME/install/portlist.ini and some information should be in the EM configuration files.
Edited by: waldorfm on Oct 20, 2010 11:48 AM
In some of my old notes I found:
2. Are you using the correct port in your URL reference to the OMS?
To check this goto the $OMS_ORACLE_HOME/install directory & take a look at 2 files, portlist.ini & setupinfo.txt.
The portlist.ini will contain the port assignments. Default for Grid Control being 7777 (Oracle HTTP Server port) & 4889
(Enterprise Manager Central Console Port) i.e. http://<OMS_Hostname>:7777/em or http://<OMS_Hostname>:4889/em
Edited by: waldorfm on Oct 20, 2010 11:53 AM
Are you running 10g Enterprise Manager Grid Control? Perhaps there is a problem and you need to shut it down:
it's been a while since 10g, but wasn't it like: emctl stop oms ? emctl stop agent etc.

Can not run http server

start http server powered by apache.I got such message:
'[alert]<5>...:FastCGI:CreateMUtex()failed
Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf:
Failed to create FastCGI application accept mutex'
my isqlplus.conf:
# Copyright (c) 2001, 2002, Oracle Corporation. All rights reserved.
# NAME
# isqlplus.conf
# PURPOSE
# Oracle HTTP Server directives for the iSQL*Plus server
# USAGE
# This file should be included in the Oracle HTTP Server
# "oracle_apache.conf" file.
# Enable handling of all virtual paths beginning with "/iplus/"
# Note: only /iplus/ is mapped, /iplus is not being mapped
<IfModule mod_alias.c>
Alias /iplus/ "C:\oracle\ora92\sqlplus\admin\iplus/"
# Disallow users from trying to access /iplus/ directory listing
<Directory "C:\oracle\ora92\sqlplus\admin\iplus">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Enable handling of all virtual paths beginning with "/isqlplus"
<Location /isqlplus>
SetHandler fastcgi-script
Order deny,allow
# Comment "Allow ..." and uncomment the four lines "AuthType ..."
# to "Require ..." if Oracle HTTP authentication access is required
# for the http://.../isqlplus URL
Allow from all
#AuthType Basic
#AuthName 'iSQL*Plus'
#AuthUserFile C:\oracle\ora92\sqlplus\admin\iplus.pw
#Require valid-user
</Location>
# Enable handling of all virtual paths beginning with "/isqlplusdba".
# Note: Oracle HTTP authentication access must be configured to
# prevent unauthorized users performing DBA operations on
# the database
# Use the HTTP server utility script "htpasswd" to add users to the
# "iplusdba.pw" file.
<Location /isqlplusdba>
SetHandler fastcgi-script
Order deny,allow
AuthType Basic
AuthName 'iSQL*Plus DBA'
AuthUserFile C:\oracle\ora92\sqlplus\admin\iplusdba.pw
Require valid-user
</Location>
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>

Yes there is
Oracle Developer Suite HTTP port = 8889
Oracle Developer Suite JMS port = 9240
Oracle Developer Suite RMI port = 23910
Oracle HTTP Server Diagnostic port = 7200
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021

Changing port for http server not working, please help

Hi Gurus
I installed standalone hhtp server from db companion cd on AIX 5.3 10gR2.
I tested the http server URL http://XXX.XXX.XXX.com:7777/epdev/helloworld
after creating a procedure in the db and it works
But I need http server to use port 80 and not default of 7777
I did 2 changes in httpd.conf - Port 80 and Listen 80 But after this I am not
able to start http server . Can somebody tell me what am I missing here ?
I even tried starting it as root and got error as well
$HTTP_HOME/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=cov6053:6200
0 of 1 processes started.
ias-instance id=IAS-X-cov6053.6299
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=720916)
failed to start a managed process after the maximum retry limit
Log:
/export/host/thishost/unix/cen/app/oracle/product/http10.2/opmn/logs/HTTP_Server~1
The log file has this entry no error:
07/11/15 10:45:26 Start process
/export/host/thishost/unix/cen/app/oracle/product/http10.2/Apache/Apache/bin/apachectl start: execing httpd
Thanks a lot for your help

I was able to reslove this. Followed this :
On UNIX, you will hare to run as root if you want to run on ports less than 1024.
In order to run Oracle HTTP Server as root, perform the following steps:
Shutdown Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] stopproc ias-component=HTTP_Server
Change to root user. Navigate to ORACLE_HOME/Apache/Apache/bin on UNIX or ORACLE_HOME\Apache\Apache\bin on Windows and execute the following command:
chown root .apachectl
chmod 6750 .apachectl
Exit root.
Restart Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] restartproc ias-component=HTTP_Server

Can we change the default port http server??

Hello,
While i'm installing the Oracle9iAS, the port for http server is given as 7777. If i want to change that port to 80, how can change that??? or anyway to hide and show the main page as http://oracle9i.jade.com
Thanks
Regards,
Ming Jade

Ming Jade,
Yes...you can change it in
<Oracle9iASHome>/Apache/Apache/conf/httpd.conf
Change the value of Port from 7777 to 80 and the restart your application server...
Cheers
--Venky
Resources :
For information on configuring J2EE1.3 applications
in Oracle9iAS, please have a look at the following tutorials:
http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/content.html
http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/tutorials/HiAvTutorial.html
http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/tutorials/webcache.html

Oracle Http server 11g, change ports with command-line tool

I have installed the WLS11g webtier's Oracle Http server 11g. I installed the OH 11g only.
The OH is runing fine with ports: non-ssl 7779 and ssl 4444
I want to change the ssl port to 443 such that we can have the url without showing the port as https://hostname.domain/
I have looked up the documnet http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/ports.htm#CIHJIFHB for "managing port".
it states "You can change the port numbers for some Oracle Fusion Middleware components, using Fusion Middleware Control, Oracle WebLogic Server Administration Console, or *the command line*."
Because I only installed the OH, I have no the Fusion Middleware control , admin console available for making the port change. And I cannot find out how to the command line tool to make the change.
I followed the steps in section 5.3.2.1 Enabling Oracle HTTP Server to Run as Root for Ports Set to Less Than 1024 (UNIX Only) http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/ports.htm#CIHJEEJH
And I did edit ssl.conf for port change to 443 ---- this is not documented in the document. I think because Oracle wants you to use the console to make the change.
OH is not working after I made the change.
Does anyone know how to use the commend line tool for making the port changes for OH11g?
Thanks

Hi,
if u want to achieve it using JMX then u can try :
http://middlewaremagic.com/weblogic/?p=613
Using Command Line Option WLST you can do it in ONLINE Mode...like:
Step1). Please run the ". ./setWLSEnv.sh" script to set the CLASSPATH & PATH in the shell prompt.
NOTE: Run the “setWLSEnv.sh” by adding two DOTs separated by a single space …..before the actual script like following : (use ‘cd’ command to move inside the <BEA_HOME>/wlserver_10.3/server/bin) then run the following command….
*. ./setWLSEnv.sh*
Note: the first DOT represents that set the Environment in the current Shell, AND the second ./ represents execute the script from the current directory.
Step2). Now in the same Shell Prompt please run the WLST Utility like following:

java weblogic.WLST
wls:/offline> connect()
Please enter your username [weblogic] : weblogic
Please enter your password [weblogic] : weblogic
Please enter your server URL [t3://localhost:7001] : t3://localhost:7001
Connecting to t3://localhost:7001 with userid weblogic ...
edit()
startEdit()
cd ('Servers/AdminServer')
cmo.setListenPort(9999)
save()
activate()

Now you NEED NOT to restart your Server to reflact these Changes....
The Above JMX Code is also able to do it in Runtime only on the Fly.
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

Multiple Context - Changing http server port

Hi,
Is it possible to change the firewall https port to different port? Normally in single context mode you can change it with this command.
http server enable 4434
In multiple context mode there is no option for the port...
http server enable ?

hi marius,
i just tried this on our live ASA 5520 and you're right, it can't be done on admin context.
it also can't assign a diffrent port under a different context. only default 443 is accepted.
ciscoasa/admin(config)# ip http serve enable ?
ERROR: % Unrecognized command
ciscoasa/CONTEXT(config)# sh ve
Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 6.3(5)
ciscoasa/CONTEXT(config)# http server enable ?
configure mode commands/options:

How to change port for discoverer server

Hi All,
Current default port is 7777 for discoverer server.
how to change the port number ?
Thank you.

[Disco Configuration Guide|http://download.oracle.com/docs/html/B13918_03/maint.htm#i1035783]
Hi,
I would recommend using the Oracle Business Intelligence Discoverer Configuration Guide appropriate for your implementation (e.g. for Oracle BI Discoverer 10g Release 2 for SPARC, click on the link above). Here is what the documentation says:
To change the port on which Discoverer is deployed:
-Start Oracle Application Server Control and display the System Components page (for more information, see Section 5.1.2, "How to start Application Server Control and display the System Components page").
Display the Ports tab
-In the rows containing the Oracle HTTP Server component (Type=Listen), select the edit icon in the Configure column to display the Server Properties page for that component.
-Scroll down to the Listening Addresses and Ports area and change the port number in the Default Port field.
-Click OK.
-When you are prompted to restart the Oracle HTTP Server, click Yes.
For more information about the Server Properties page in Application Server Control, see Application Server Control Help.
Hint: If you change a Discoverer port number, make sure that any other OracleAS components that use that Discoverer port number are synchronized.
I have not needed to do this, so I can not speak from experience. As always, try this in a test environment first.
Patrick
Edited by: Patrick Bacon on Dec 8, 2009 5:31 AM

HTTP Server - change port 7777 to 80

Similar Messages

Maybe you are looking for