Http server in the same oracle home or not ?

Hi, finally i could install oracle 10g 10.2.0.3 on windows vista. Now i want to install http server but i wonder if i have to install in the same oracle home or in another one. Some documents says yes another one not.

oracle_sv wrote:
I would like to keep 10g version. I have the cd companion. The fist time that i tried to install give some errors and after that i couldn´r start OracleDB console and EMOuch! I suspect that was due to installing HTTP Server binaries in your Oracle home?
I have only installed HTTP Server on Linux, and I had a separate home for the Oracle database binaries and HTTP Server.
The installation (at least on Linux) was straight forward, provided you have done your prep work by installing the correct RPM's, environment, etc.
Once you have HTTP Server installed, you have to fulfil the rest of the APEX requirements (if not already done), such as:
- Patch HTTP Server (for Linux, this is Application Server Patch 5983622)
- Install XML DB
- Install Oracle Text
- Upgrade PL/SQL Web toolkit
- Install APEX (I had 3.12 originally installed, but recently upgraded to 4.0 which was painless).
- Configure your Apache/modplsql/conf/dads.conf in your HTTP Server home
You will need to read the installation guides on how to do each of the above. You might have more luck doing this on Linux than Windows.
If I was in your position and starting from scratch on this, I would be installing 11g, as it might not be so much work since APEX comes as part of 11g.

Similar Messages

Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

Hi,
I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
Thank you,
Martin Giffy D'Souza
[http://apex-smb.blogspot.com/]

I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
I can't remember if I used different ports or same port.

Multiple APEX instances sharing the same Oracle Home?

Can someone tell me if it is possible to have multiple APEX installations where the database instances are sharing the same Oracle Home? If so, how would this be set up?
So, if I have development and test running on the same home, I want a separate APEX instance for each. We can do this when different Oracle homes are used (separate httpd running) but not for the same home.
Thanks

Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???

Running multiple instances from same oracle home

Hi Gurus,
I am preparing for OCA 11g examination. I had a question about running multiple instances from same oracle home. While reading the book I came across a statement about database control which says "If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).
I am not able to understand how exactly can you have multiple database instances in a single oracle home. I have installed Oracle 11g on my computer whose oracle home is +"D:\oracle\product\10.2.0\db_1"+; now this directory houses all the binaries (executables and folders like admin,bin, etc) for the oracle instance that I have installed (the instance name is ocp1). Now if I am to install or create another Oracle Instance (say ocp2) in the same home, wont there be a conflict of binaries of the two instances in the same home ?
Basically,it makes sense if db_1 folder is further split into multiple folders, one for each instance (for example, one for ocp1 & one for ocp2); each of these folders will then contain the binary files, libraries,etc for its own instance; but, this is not the case, here db_1 houses all the binaries directly under it ...
The other question which stems from the statement I mentioned above is that if having multiple instances running from same oracle home accessing the same physical database, can this arrangement be called RAC at all; or does RAC dictate that you cannot have multiple instances that are accessing the same database have to be installed on physically separate machines and so you cannot have two RAC instances (accessing same physical database) installed on the same computer ??
I hope my questions are not too much confusing ... !!
Cheers,
Sudripta

Hello,
"If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".This is true, and also means each instance will have its separate database (i.e. dbf files etc.) & separate DB Control. Usually in this case you create several instances on the same node.
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).You are correct about RAC where several instances (usually running on separate nodes) access the RAC.
More info:
1 Oracle Home - 1 Database - 1 SID is possible.
1 Oracle Home - Many Databases - Many SID is possible.
1 Oracle HOme - 1 Database - Multiple SID is possible and this is called RAC.

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

How to install oracle http server in the windows

Hi,
Can any one mention how to install oracle HTTP server in windows 2003 server machine?
regards,
suresh G.

Hi,
Which version of Oracle HTTP Server are you looking for ?
Download link,
http://www.oracle.com/technetwork/middleware/ias/downloads/101310-085449.html
Here you will get both Apache version 1.3.34 for OHS based on Apache 1.3 and Apache version 2.0.55 for OHS based on Apache 2.0.
Prerequisites
http://docs.oracle.com/cd/B25222_02/quickinstall.1013/quickinstall/quick_install.htm#sthref9
Installation steps
http://docs.oracle.com/cd/B25222_02/install.1013/install/basic_install.htm#sthref274
On the 1 st screen Select Advanced Installation Mode,
And select only Oracle HTTP server in the 2nd screen
Regards
Fabian

Oracle TDE - Can multiple databases use the same Oracle wallet?

Oracle Advanced Security Transparent Data Encryption
I will have 2 or more databases running under the same Oracle 11.2 home. According to Oracle's documentation, it is preferred to reference the wallet via the sqlnet.ora file. That's fine. My question is if I want to use encryption in each of those databases, then I have no choice but to use the shared wallet then, correct.
I need to confirm that I have not missed something.
From Oracle's documentation:
Specifying a Wallet Location for Transparent Data Encryption
If you wish to use a wallet specifically for TDE, then you must specify a wallet location in the sqlnet.ora file by using the ENCRYPTION_WALLET_LOCATION parameter.
Oracle recommends that you use the ENCRYPTION_WALLET_LOCATION parameter to specify a wallet location for TDE.
http://docs.oracle.com/cd/E18283_01/network.112/e10746/asoappa.htm#i634447
Oracle Advanced Security Transparent Data Encryption
ENCRYPTION_WALLET_LOCATION = (SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY =
/etc/ORACLE/WALLETS/oracle)))
thanks!

Do not do this, follow this http://www.youtube.com/watch?v=Z9odSZxdoGU instead!
Best, Peter

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

Is it possible to create multiple LDAP server in the same bi11g application

Hi,
they are 8 location users are acessing my report.now i am trying to implementing LDAP server for the user security in my obiee11g application. is it possible to configure/implement multiple LDAP server in the same BI server.
Thanks
Deva

YES. refer http://total-bi.com/2011/07/multiple-ldap-authentication-providers-in-obiee-11-1-1-5/

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

INS-32021 : Insufficient Disk Space on volume for the selected Oracle Home

Hi
I am trying to install Oracle 11g on my Red Hat Linux 5 (VMWare). I have completed all the pre-requisites realted to Kernel settings, creating groups, users, home and base directories. When I started running the 'runInstaller' and started the installation, it gave me an error saying...
'INS-32021 : Insufficient Disk Space on volume for the selected Oracle Home'.
Anyone any idea what is going on?

you haave to switch off vmware add new disk from vmware console. then using format tool you can add partition for unallocated space. and add them in volume.
space increase by adding new disk.
http://muffinresearch.co.uk/archives/2010/03/30/adding-more-disk-space-to-a-linux-virtual-machine/
this is quickest process will help adding disk space .
Regards,
Vinay

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can I do multiple installs on one server at the same time ?

Hi. we have a project where the basis group is under very tight deadlines. We are tasked with installing multiple SAP systems on the same server. Is it possible to install more than one SAP systems ( ie ERP, BI, EP, CRM ) on the same physical server at the same time. for example on analyst install ERP while at the same time another analyst do EP and so on.... Has anyone done that before and if so are there any issures. ( I put in a SAP note and got the response that this is not supported, but I just wanted to see if anyone had done it anyways )

Hi Dan,
Frankly simultaneous installations is not a great idea. There will be an enormous competition for resources. Then you also need to make available ports for carrying out the installations. Next it will involve high amount of coordination
What of course is more reasonable is the idea of hosting more than one SAP instance on the same physical server though again harware is a very important concern. It includes your hard disk space,memory,CPU and other generic hardware.
Please award points for useful answers.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

How to show a picture both on client and server at the same time (X11?)

Hi Guys
I want show a picture on my client as well as on the server(in another location) at the same time, pretty much like showing something both on laptop and on a projector. Assume I have a picture sssss.jpg on the server A1, if I want to open that picture to my client, I can simply to do the following from client A2:
xhost A1
telnet to and login A1
setenv DISPLAY "ipaddress of A2":0.0
Anyone can direct me how to show picture the client that I am sitting at an also show on the server at the same time?
Thanks

VNC would let you do that. With a shared connection, both machines could run a VNC client to the same session.
Darren

A server with the same hostname could not be found!

Hi macusers,
I saw that error on multiple threads but I found none related to my issue. So, before ignore it let's describe it:
Two MAC Mini: one early 2009 and second late 2010. Both OS 10.9.1, MacKeeper installed, 6+Gb for RAM. Both uses the same router to connect the internet. Both are LAN connected not WiFi. I even changed the DNS addresses on router using Google DNS.
On Mac 2009:
1. Safari opens pages randomly. Sometimes a website is not open but when I create a new tab and select the website from bookmarks the website is opened while in previous tab still says: Safari cannot find the server .... All those websites are used in my daily work. I am not reseting Safari unless necesary.
2. MAIL is showing online only Gmail acccount from 4 accounts. The rest of the accounts are not Gmail and appear as Offline. I restart MAIL and they appear online. I have to do that Open/Close MAIL several times a day.
3. Sharefile and oDesk Team application cannot be opened because of that error: A server with the same hostname could not be found!
4. Apple Store is displaying questions marks instead of the icons and I can barely see what softwares I have installed.
Now the beauty. Only on MAC 2009 I am experiencing those issues. The other MAC is fine. So far.
What I tried so far:
A. Reboot in SafeMode and Repair Permissions, Repair Disk. Everything OK.
B. PRAM Reset and SMC Reset.
C. Scan for viruses. No virus detected.
oDesk Team app is working fine on the other MAC and I managed to install it on Mac 2009 on Windows 7 partition as well. Is working fine.
Here are some screenshots showing you some of the errors I am picking on my side.
That one is taken while trying to connect to ShareFile. After three or four attempts it finally managed to connect.
That was a beauty. While MacKeeper was showing me that I am Offline, I was talking on Skype with a friend.
Still cannot access oDesk Team application. However, after several attempts it is logging but what is showing me is a real nightmare.
If I choose to see my contracts (though in the upper corner there is not my account) they do appear:
Any valuable entry will be highly appreciate it.
Warm regards,
Sebastian
P.S. I just remembered that I saw on a post in here related to the same error that someone from Apple asked a guy to make a test in terminal using a command line. I do it on my MAC and here is the result:
Message was edited by: sebdea

Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian

Http server in the same oracle home or not ?

Similar Messages

Maybe you are looking for