Http--- Xi-- JDBC scenario?
can the forum provide me a blog for doing http--->XI-->jdbc scenario......
Dhar,
Get the data into XI using the HTTP adapter. Check this blog on how to get data into XI:
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Once you get the data into XI use this blogs to send data into the database:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1725 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/william.li/blog/2007/03/30/using-jdbc-connection-pool-in-xi-message-mapping
---Satish
Similar Messages
-
Hi all,
I am trying to execute a synchronous Http to Jdbc Scenario using MS Access table as my back end.
In design part ,I have followed the steps like
1. Created a http req ,jdbc req, jdbc response ,and then http response in Data types and the in Message types.
2.Created Outbound MI with http req and http response as input and output messages respectively,then Inbound message interface with jdbc req and jdbc response as input and output messages respectively.
3.In Message mapping with Http req and jdbc req as request mappings and jdbc response and http response as Response mappings following the Action and access Steps.
Thats Fine with design part
IN Configuration Part, Since it is a Http Sender ,i didnt create any sender agreement and sender communicatin channel.
Then Configured Jdbc adapter properly and i am able to access my table with that.
While Executing ,I can find that my message is sent in Runtime workbench and can find that Jdbc adapter is Running by showing green flag.
I was trying to send an empid of a table as key and expecting to retrieve the complete row of the corresponding key.
But I could not find the response even though everything is fine with XI.
Where Could be the problem ,where can I see the response from jdbc adapter .
Please help me out in solving this .
Thanks and Regards,
KalpanaHi Kalpana,
Can you check this weblog
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
This should help you...
Check the Response Mapping,also you have one IM with Reqest and Response mapping...
Also if you have SP16 then you can have sender CC for HTTP also ...
Regards,
sridhar -
Can any one tel me how to implement Http to Jdbc scenario.
Thanks in advanceRefer this link also while designing the JDBC MT.
http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
Thanks
Farooq. -
Http to jdbc sync scenario needed
hi all,
Can any one give me certain example of http to jdbc sync scenario
Thanks in advance.Hi,
Refer this link.
For JDBC receiver side settings
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
JDBC Receiver Adapter -- Synchronous Select Step by Step
For HTTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
JDBC Receiver Adapter -- Synchronous Select Step by Step
HTTP Queue
error in HTTP to file scenario
Regards,
Sharanya.
Edited by: sharanya devaraj on Aug 5, 2008 8:09 AM -
XI idoc-jdbc scenario in details
Hi Experts,
Please provide me this scenario pn detail.
Cheers
AmanHi,
For IDOC to JDBC scenario:
Refer the below weblog for help:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
1) First you need to install the JDBC drivers on XI server refer the below link for installation process.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
2) You need to do the IDOC configuration at R3 as well as at Xi end:
Refer the below configuration steps:
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
IDOC testing using WE19
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
Configuration required at Xi side:
Go to IDX2: load the DOC metadata.
3) For updating the table you need to write the stored procedure:
Refer the below link for stored prcedure.
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
Thnx
Chirag
Reward points if it helps and close the threads. -
Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario
Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
FlorianIs there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek -
Problem in JDBC to JDBC scenario
Hello all,
I am working on a JDBC 2 JDBC Scenario.
Everything gone fine, data is picked from source, but it is not updated in the destination.
I could not see any message related to this in SXMB_MONI it shows only messages related to IDOC, on search I fould, we need to add trace level,etc in SXMB_ADM but still couldnot found any message (I restarted the system, cleared cache also).
In RWB(communication channel monitoring) I could find that sender is sucessful, but no message for receiver.
In RWB (message monitoring) I checked my business system, i could see sender entries but no receiver entries, there is only one error message as :
<b> transmitting the message to endpoint http://xisystem:50100/sap/xi/engine?type=entry using connectio</b>
For which I found we need to change XI businesssystem's pipeline port no from some 54+++ to 4+++ (but I could see only 50100 in the pipeline so i did'nt)
we are using R/3, was7.0 sp11,XI3.0,
Can any body help me in this regard
Thanks,
Sai.k.kHi,
Error in SXMB_MONI :
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_JDBC2JDBC_MM_: RuntimeException in Message-Mapping transformatio~
Error in Integration repository when I test with the payload :
<pre>
13:01:52 Start of test
Document start
Start tag [ns0:Receiver_JDBC_MT]
Add raw attribute [ xmlns:ns0="http://xyz.com/JDBC2JDBC_NMSP"]
Start tag [Statement]
Start tag [dbTable]
Add attribute: [action]=[INSERT]
Start tag [table]
Put value [Example]
Close tag [table]
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)com.sap.aii.utilxi.misc.api.
BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73)
at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException:Fatal
Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)(:main:, row=1, col=8) ->
com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73)
at java.lang.Thread.run(Thread.java:534) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73)
at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
13:01:52 End of test
</pre>
Query : Select * from Employee fetches all the fields
Payload :
<pre> <?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<PerNer>t</PerNer>
<Initials>t</Initials>
<Name>t</Name>
<DOB>t</DOB>
<State>t</State>
<Country>t</Country>
</row>
</resultset>
</pre>
Regards,
Sai.k.k -
Error"SYSTEM Failure" while testing the RFC in SE37 : RFC to JDBC Scenario
Hi All,
I am doing RFC to JDBC scenario. When I am testing the RFC in SE37 using the RFC destination created in SM59, I get an error "SYSTEM FAILURE".
Please suggest.
Thanks,
Shyam
Edited by: Shyam Sreepada on Dec 18, 2007 5:46 PMHi,
You must run RFC with RFC destination in background mode, I suggest to read following post in order to understand it better.
Syntax would be:
CALL FUNCTION func IN BACKGROUND TASK
[DESTINATION <your RFC destination>]
parameter list
http://help.sap.com/saphelp_nw04/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
If you read it you will find that you can't test it directly from SE37, for this either you need to create dummy ABAP program or another RFC where you will call this RFC with background syntax.
Regards,
Gourav
Reward points if it helps you
Edited by: Gourav Khare on Dec 18, 2007 6:07 PM -
Dear Friends,
I am performing Simple File to JDBC scenario. For this I am using MySql. I have designed and configured all the required steps and activated. Now I went to Runtime Work Bench monitoring.. Here in Message monitoring status is "waiting". Here it has thrown one exception like this, Exception caught : Jdbc Receiver Channel:Configuration not initialized due to loading Jdbc receiver
"com.microsoft.sqlserver.SQLServerDriver" Failed :java.lang.ClassNotFound - Exception : com.microsoft.jdbc.sqlserver.SQLServerdriver.
Please help me,Now what i have to perform.
thanks in advance.check this
http://help.sap.com/saphelp_nwce10/helpdata/en/45/08546ff5200486e10000000a155369/content.htm
and
https://wiki.sdn.sap.com/wiki/x/sAA7AQ
Regards,
Ravi -
IDOC-XI-JDBC scenario, jdbc sent too slow
i have a IDOC-XI-JDBC scenario,
the problem is that near 5 Lac IDOC is sent to XI, each IDOC is processes by an instance of the scenario, and the sent to the Database is too clow...means 4000 records per hour,
can i configure the JDBC receiver adapter in a way, so that it becomes faster/more concurrent,Hey,
First raise the issue to the DBA he might help resolve the ISSUE more efficently.
Secondly check in the JDBC adapter -> Adavance mode -> Disconnect from the data base after processing each message shouldn't be set.
Even check with Database Transaction Isolation Level -> default is value of the connected database.
<b>The isolation level determines how transactions running in parallel can influence each other</b>
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Why not the other way around > Collect multiple idocs in a file restrict maxium number of idocs to required value then send the file ?
Stefan Grube Example:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
if it is with bpm then collect multiple idoc with occurance change and send them.
<b>Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL <b> -
i have a IDOC-XI--JDBC scenario,
the scenario fails at the Call Adpater Pipeline step............giving following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
pls help me.....
Message was edited by:
sudeep dharbut this error occurs after few message pass successfully.....
means at an interval this error happens...then again few messgae pass successfully,
This is the error which i get in MONI:
ERROR_CATEGORY: INTERNAL
ERROR_ID: HTTP_RESP_STATUS_CODE_NOT_OK
and in the pipeline step i can see the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
Hi All,
I am doing a File to JDBC scenario, where sender side message type occurance is 0..unbounded and receiver side message type occurance is 1 in message mapping. The whole scenario working fine when both sender and receiver side message type occurance is 1 in message mapping.
When Sender side occurance is 1.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_smtjdbc_sender xmlns:ns0="http://SmartJDBC">
<NAME>A</NAME>
<DEPT>B</DEPT>
</ns0:mt_smtjdbc_sender>
When Sender side occurance is 0..unbounded.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:mt_smtjdbc_sender xmlns:ns1="http://SmartJDBC">
<NAME>Dip</NAME>
<DEPT>xi</DEPT>
</ns1:mt_smtjdbc_sender>
</ns0:Message1>
</ns0:Messages>
If I use Sender side occurance as 0..unbounded I am getting the following error in adapter engine Communication channel monitor (for receiver communication channel)
Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
Can anybody please help me how to solve this problem?
DipankarHi,
My Sender side structure as follows.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:mt_smtjdbc_sender xmlns:ns1="http://SmartJDBC">
<NAME>DIp</NAME>
<DEPT>XI</DEPT>
</ns1:mt_smtjdbc_sender>
</ns0:Message1>
</ns0:Messages>
My corresponding Receiver side structure as follows.
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:mt_smtjdbc_receiver xmlns:ns1="http://SmartJDBC">
<Statement>
<dbTableName action="INSERT">
<TABLE>SMARTOP</TABLE>
<access>
<NAME>DIp</NAME>
<DEPT>XI</DEPT>
</access>
</dbTableName>
</Statement>
</ns1:mt_smtjdbc_receiver>
</ns0:Message1>
</ns0:Messages> -
Error comming in File to JDBC scenario.
Hi Frnds,
I am trying to do the File to JDBC scenario and is using the SQLServer.
After processing the message, it is showing executed successfully in moni but for the receciver communication channel i am getting the error like---->
Error during database connection to the database URL 'jdbc:sqlserver://10.112.132.211:1433;databaseName=DemoDB' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://10.112.132.211:1433;databaseName=DemoDB': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
What could be the possible solution for it.
Thnx
Raj.Hi Raj,
As Prateek mentioned, the error you are getting is because of an improper installation of a driver.
Check out the doc for the driver installtion steps : [How To Install and Configure External Drivers for the JDBC & JMS Adapters|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f]
Also, the following thread contains some more useful links : Re: What's necessary to connect SQL server to XI?
Thanks,
Pooja Pandey -
Run-time mapping exception in JDBC Scenario
Hello There,
We are working on a "Communication between IDOC and JDBC" Scenario where in the IDOC is successfully getting called in SAP XI from an SAP R/3 system. But!, when we try to map the IDOC structure with a JDBC Database structure through a manually created XSD, it gives the following run-time mapping exception :
"During the application mapping com/sap/xi/tf/_RequestMapping_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
The following is the XSD that we have created manually for the Target JDBC database table structure which shows the parent-child relationship of the database and is causing the above stated exception :
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSPY v2004 rel. 4 U (http://www.xmlspy.com) by sekhar (MSS) -->
<!W3C Schema generated by XMLSPY v2004 rel. 4 U (http://www.xmlspy.com)>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="ACCOUNT_GROUP" type="xs:byte"/>
<xs:element name="AUTHORIZATION_GROUP" type="xs:byte"/>
<xs:element name="CITY" type="xs:string"/>
<xs:element name="CITY_CODE" type="xs:short"/>
<xs:element name="COMPANY_CODE" type="xs:short"/>
<xs:element name="COUNTRY_CODE" type="xs:byte"/>
<xs:element name="COUNTRY_KEY" type="xs:byte"/>
<xs:element name="CREATED_DATE" type="xs:short"/>
<xs:element name="CUSTOMER_CLASSIFICATION" type="xs:boolean"/>
<xs:element name="CUSTOMER_NUMBER" type="xs:short"/>
<xs:element name="DISTRICT" type="xs:string"/>
<xs:element name="FAX_NUMBER" type="xs:int"/>
<xs:element name="FIRST_NAME" type="xs:string"/>
<xs:element name="GROUP_KEY" type="xs:byte"/>
<xs:element name="HOUSE_NUMBER" type="xs:date"/>
<xs:element name="INDUSTRY_KEY" type="xs:byte"/>
<xs:element name="INTIAL_CONTACT" type="xs:byte"/>
<xs:element name="LAST_NAME" type="xs:string"/>
<xs:element name="LOCATION_NUMBER" type="xs:string"/>
<xs:element name="NAME_PERSON" type="xs:string"/>
<xs:element name="POSTAL_CODE" type="xs:int"/>
<xs:element name="REGION" type="xs:string"/>
<xs:element name="REGIONAL_MARKET" type="xs:byte"/>
<xs:element name="TELEPHONE_NUMBER" type="xs:long"/>
<xs:element name="VENDOR_ACCOUNT" type="xs:byte"/>
<xs:element name="resultset">
<xs:complexType>
<xs:sequence>
<xs:element ref="row"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="row">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element ref="CUSTOMER_NUMBER"/>
<xs:element ref="COUNTRY_KEY"/>
<xs:element ref="FIRST_NAME"/>
<xs:element ref="LAST_NAME"/>
<xs:element ref="LOCATION_NUMBER"/>
<xs:element ref="AUTHORIZATION_GROUP"/>
<xs:element ref="INDUSTRY_KEY"/>
<xs:element ref="GROUP_KEY"/>
<xs:element ref="ACCOUNT_GROUP"/>
<xs:element ref="CUSTOMER_CLASSIFICATION"/>
<xs:element ref="VENDOR_ACCOUNT"/>
<xs:element ref="REGIONAL_MARKET"/>
<xs:element ref="INTIAL_CONTACT"/>
<xs:element ref="COMPANY_CODE"/>
<xs:element ref="CREATED_DATE"/>
<xs:element ref="NAME_PERSON"/>
<xs:element ref="CITY"/>
<xs:element ref="CITY_CODE"/>
<xs:element ref="COUNTRY_CODE"/>
<xs:element ref="DISTRICT"/>
<xs:element ref="FAX_NUMBER"/>
<xs:element ref="HOUSE_NUMBER"/>
<xs:element ref="POSTAL_CODE"/>
<xs:element ref="REGION"/>
<xs:element ref="TELEPHONE_NUMBER"/>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
IS THERE ANY OTHER WAY OF ACHIEVING THE ABOVE TASK OF AUTOMATICALLY GENERATING THE REQUIRED DESTINATION STRUCTURE ON THE JDBC TARGET SYSTEM SIDE ?. PLEASE ADVICE ASAP.
REGARDS ......
K. Venkat!.Try setting the classpath properly. It seems the runtime evironment is unable to find the compiled class files. Nothing else is wrong.
--Anil -
Hi,
I am doing JDBC to JDBC scenario using MS Access Database, Here i am getting the problem with Sender JDBC Communication channel.so it can't pick up the data from MS Access.
Error in sender Communication channel:
Error During database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=C:\XI\Sender\Sateesh.mdb' using the JDBC Driver 'sun.jdbc.odbc.JdbcOdbcDriver':'com.sap.aii.adapter.jdbc.sql.DriverManagerException:Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=C:\XI\Sender\Sateesh.mdb' SQLException:[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) jet DSN for process 0xf48 Thread 0x1cac DBC 0x76a6eac Jet'.'
So please check the error and update from your end...
Thanks In Advance,
Regards,
Sateesh N.Hi Sateesh,
Please check the values provided in the User credentials while connecting to Database it is giving the error.
Try to access the DATABASE by using the standalone application and test it.
Go throgh the following links same type of problem was discussed.
Re: JDBC adapter error
http://support.microsoft.com/kb/295297
Regards
Goli Sridhar
Maybe you are looking for
-
Hello all, I am using Spry Menu Bars for the first time and have checked out most of the online documentation. I have gone into the CSS file to customize much of the look of my first menu. I would like to do the following, but can't seem to find wher
-
Looking for a beginners guide ot site survey
Good evening, Getting ready to do a site survey of a rather large facility... About to switch to an entirely different wireless nic (intel 3945ABG) which isnt performing as well as its cousin, 2200BG. Reviewing the stats of the cards it doesnt make s
-
How to know if a canvas exists in a form
I use a reference form and a template as the base of all my forms. There is some code I'd like to put in my reference form which does one thing or another depending upon whether or not a certain canvas exists in a form. Is there some way for me to kn
-
Selective copying from iTunes to iPod?
The music in my iTunes library exceeds the capacity (30GB) of my iPod. Is there a way that I can keep all the music in my iTunes library but copy only those songs I currently want on my iPod (and will fit)? I'm hoping I don't have to go the the troub
-
Combine checked item and update column
Hi all, need to design a screen that allow user to update column (code) and also pick which statement to display for the next stage. My thought was to create a checkitem and LOV display. Once user has checked the box , the process should update the c