Https service doesn't works through CSS

I have 2 CSS 11501, and they work fine.
The only problem that has is that it doesn't work one of the content HTTPS.
This is the configuration that I have:
service server54
ip address 172.16.10.46
keepalive port 443
keepalive type tcp
active
service server55
ip address 172.16.10.146
keepalive port 443
keepalive type tcp
owner https
content web
vip address 10.102.1.28
add service server54
port 443
protocol tcp
application ssl
advanced-balance ssl
add service server55
active
group web
vip address 10.102.1.28
add service server52
add service server53
add service server54
add service server55
active
I've left only one of the services active. In the CSS I see the requests but no package comes to the server.
The http service has the same addresses and does not have any problem.
What can happen?

Hello,
Did you check that the service is alive? (CSS# show service summary)
Did you check that the CSS is showing service hits for that content rule? (CSS# show summary) when you are doing requests?
If the users are the ones that are opening the connections, please change the group configuration:
group web
vip address 10.102.1.28
add destination service server52
add destination service server53
add destination service server54
add destination service server55
active
After trying all above, if you keep having the problem, the best way to know what is happening is get simultaneous captures, in the switch(s) where the CSS is directly connected, and you will see the CSS receiving the traffic, and forwarding the traffic to the backend servers.
You will confirm or at least you will see if the CSS is not the problem.
- Rodrigo.

Similar Messages

I configure the JServ , but Oracle HTTP Server doesn't work agian

my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
when i run flowing command :
D:\oraias\dcm\bin>dcmctl getstate -v
and Error message : "ADMN-100999 Base Exception:
java.lang.ClassCastException:java.lang.Boolean" has shown.
and i navigate Enterprise Manager web site these Error Message showing:
"Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
how can i do? please help me.
THX

The key message -
mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
Looking up that error gives -
[jes@spdb1 ~]$ oerr ora 12541
12541, 00000, "TNS:no listener"
// *Cause: The connection request could not be completed because the listener
// is not running.
// *Action: Ensure that the supplied destination address matches one of
// the addresses used by the listener - compare the TNSNAMES.ORA entry with
// the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
// go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

Services doesn't work since the upgrade to 10.6.4

I just found out that Services doesn't work at all. If going in an application App name > Services > here it should show possibles thing to choose but it says only Building in a grey down text. When opening Keyboard in the System preferences > Services > here it is empty when there should have many many features to use.
If anyone has a solution or suggestions to make it work again I appreciate an input.

In the new account it did work. I did a new restart and now it worked in the old account too. For some reason I had to do several restart. Anyway it behaves as it should now,
Many thanks, baltwo!

Mac Mail client doesn't work through DSL

We just started using a Verizon DSL connection for our small business. Most things work great -- surfing the web is fast and I can access secure site via browser. For some reason I cannot connect through DSL to get email when I'm using the Mac Mail version 4.4 client. The connection just hangs. I have one pop account and 3 google gmail accounts that I consolidate within the offline client. I luckily have an alternative wifi connection in this building that I can use to get mail, but I need to switch back to our own nework to use the printer and surf at a higher speed.
Our CTO was able to fix it for a day by setting an exception on port 995 -- which is what the mail client uses to retrieve mail.
I know it's realted to Verizon DSL because the same computer works at home via our Verizon Fios service. It's also not an issue with Wifi -- it still doesn't connect when I use a LAN connection directly to the modem.
Please let me know if there are any fixes or work-arounds.
Thanks.
Rusty

sample settings
Incoming
Your incoming mail server
no ssl
Your email address
your username
your password
outgoing
outgoing.verizon.net
no ssl
my server requires authentication = yes
your verizon username (should be the same thing that you use to sign in at http://webmail.verizon.com, test your password by logging in at that website, if it doesn't work, then reset your password and use the correct information)
your verizon password
should work on 25 since this part is verizon, but if it doesn't work for whatever reason try 587
sometimes third party mail servers don't play nice, and don't use 587 for their alternate port. like go daddy often uses port 80 for ougoing as an example, your mail server may like 995. I wouldn't worry about your outgoing settings, and instead use the sample configuration above and let us know if it works. PREFERABLY you should delete your account settings and start from scratch.

Apple mobile service doesn't work

hi,
from some reason when I plug my iphone 6 to my computer, I get this message-"Apple mobile device service could not be started because an unknown error occurred (1058)".and then I get a follow up message-"this iphone cannot be used because the apple mobile device service is not started".
I followed the orders in the website how to start the apple mobile service, but I get this message-"the apple mobile device service on local computer started and then stopped.some services stop automatically if they are not in use by other services or programs".
I tried again and again to start the apple mobile service but it's just stop in the middle and I get this message. I reinstalled itunes twice but it's still doesn't work.
please help me I'm desperate!

Hey oommeerr,
Sorry to hear that you are having issues with your iPhone not being seen in iTunes because of the Apple Mobile Device not working. When you reinstalled iTunes, did you uninstall iTunes first? Take a look at the article below and uninstall iTunes and its associating software in the order that it lists and then reinstall iTunes. Let me know if this works out for you.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
https://support.apple.com/en-us/HT204275
Take care,
-Norm G.

FAX doesn't working through SIP

Hello.
Fax Machine is connected to SPA 122. Cisco CUCME is used. SPA 122 doesn't support SCCP (only SIP). Fax machine works as ordinary telephone device, but doesn't work as fax machine. What is a problem?
Thanks in advance.

Hi @brkgb ,
I understand that you are able to print, but you can't send a fax. I would like to help you.
Can you make a copy from the glass and ADF?
Print out a Fax test.
Touch the setup button, (wrench)
arrow to Service menu, press OK, then right arrow to fax service, OK, then run fax test.
You should have 4 passes if everything is communicating properly.
We need to check some settings on the printer for faxing.
Private receive:
On the printer touch the setup button, (wrench) right arrow to fax setup menu, OK, fax receive setup, OK, private receive, OK, turn it off.
Error correction:
Go to the setup button, (wrench) right arrow to fax setup, all faxes, error correction, OK, turn it off.
Speed:
Go to the setup button, (wrench) right arrow to fax setup, OK, all faxes, OK, fax speed, OK, change it to medium, OK.
Clear saved faxes:
Go to the setup button, (wrench) right arrow to fax functions menu, clear saved faxes, OK, OK to clear.
Try to send a fax again.
If you are still having issues then go through the steps to see if it will resolve this issue.
Cannot Send or Receive Faxes.
If you need further assistance, please let me know the following information.
Did the fax test pass?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire phone cable?
Do you have distinctive ring set up?
Is there any voice mail set up?
Do you have a answering machine?
(Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Web service doesn't work on tomcat server

I uploaded the war file to tomcat server.
The structure as follows:
<MyWebServiceName>\classes (all the complied class files)
<MyWebServiceName>\wsdl (The generated wsdl file is in this folder)
<MyWebServiceName>\web.xml
But I can not get wsdl file from the url:
http://localhost:8080/<MyWebServiceName>/<MyWebServiceName>?wsdl
The error is the requested resource is not available.
I deloyed some other sample web services, they all work well. But I can not find any wsdl file for these web services on tomcat server. It is very strange.
Anyone can help me?

Toshiba knowledge base - how to fix webcam - http://forums.toshiba.com/t5/Video-Display-Knowledge-Base/How-can-I-fix-my-webcam/ta-p/281393
Here is another post that gives some suggestions - http://www.pcauthorities.com/pc-errors/how-to-fix-webcam-problems/
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

WebDynpro ABAP layout doesn't work through SAPRouter

Hello Everyone
I am new in the Web Dynpro ABAP environment.
When I am at the office, I can use SE80 to develop a web dynpro abap program. I can see the layout of the views,
But when I am outside of the office an want to work through SAPRouter I cannot see the layout of the views.
I am obtaining the following eror:
This Program cannot display the web page.
Any idea why through SAPRouter it doesn't work? And what to do to make it work?
Regards
dstj

Your problem has to do with FQDN (full qualified domain name).
SAP uses system parameter icm/host_name_full to determine the full qualified domain name for your webdynpro applications.
If this parameter is not set, SAP queries the operating system for the FQDN.
To check if this parameter is defined right, use SAP transaction SICF:
1) Execute transaction SICF;
2) Click the execute button (F8 key);
3) Choose menu path Goto --> ICM Monitor;
4) Choose menu path Goto --> Parameters --> Display.
In the list that will be shown, look for parameter icm/host_name_full (use the binoculars to find it). This parameter should be at the end of the parameter list. If this parameter does not exist or if its contents is not a FQDN, then you are in trouble accessing all websynpro funcionalities from outside of your network.
In this case you should change this parameter to reflect a FQDN (full qualified domain name).
To change this parameter:
1) Execute transaction RZ10;
2) Enter the profile name of the active instance (click F4 to get all possible values. There shouldn't have many. Choose the one which is an instance profile and that is named after your system name and/or system ID);
3) Click on the Extended maintenance radio button on the Edit profile group below profile name and click on the Change button;
4) If the icm/host_name_full parameter is already there, change its value to the FQDN of your network. If the parameter is not there, click on the create parameter button on the toolbar, type the paramter name (icm/host_name_full) and its value (which should be the FQDN of your network);
5) Finally, keep clicking the back (F3) key untill the system tells you that the modifications are not saved and asks if you want to save them. Answer YES.
Now, AFTER RESTARTING YOUR SAP APPLICATION SERVER, the access to all webdynpro functionalities in SE80 should work without requiring a modification of your windows HOSTS file.
REMEMBER: YOU WILL HAVE TO RESTART YOUR SAP APPLICATION SERVER FOR THESE CHANGES TO WORK!!!
Hope the above helps!
Any doubts, feel free to get in touch.
Cheers!
Lino

I am using iPod Touch 5th gen and my location services doesn't work.

When I'm in other places with wi-fi, the location services work perfectly; when I'm home, it doesn't work. What should I do?
Some forum says I need to register my point of connection using my ISP. Please tell me how to do it.

For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
Get somebody to come over with an iPhone and use your wifi network

"Coldfusion Flash Remoting Service" doesn't work!

Hi,
I have a problem with my flex builder 2. when I create a new
Flex project,the screen can not go to next screen when I click
"next" button if I select " Coldfusion remote service" option.it
works fine if I select " Basic" or "Flex Data services" options.
I do not know what is wrong with the software and I need fix
it urgently.
Thanks for help
M

Correct, Saurabh. Captivate automatically truncates wav files
(the one you edit) to eliminate silence at the beginning or end. To
get around this there are several options available to you.
First, you can just move the audio-object on the timeline,
thus creating your own "silence" on the slide without having to
actually edit the wave-form.
Second, you can edit the wave-form but when you add silence
to beginning or end, also put in some "noise" at the very end(s) of
the wave-form. The noise can be anything, and I usually just copy a
teeny-tiny bit of the audio from the file, say, a tenth of a second
... then paste it at the end (beginning or end).
Then use the "Volume" editor to change the volume of that
inserted noise to the point it is no longer within the audible
range of the human ear - but still is shown by a "spike" on the
wave-form - note, if you see a perfectly "flat-line" you have
turned the volume down too far - it must still be visible on the
wave-form. That will help it "hold its place" when you click 'OK"
to save the changes to the wave-form.
OK???
.

Automatic customer service doesn't work

So I wanted to file a ticket for the problems I have experienced, but that doesn't work
I get send this button for iOS diagnostics (which by the way takes 30 minutes to load because its a gmail email address), and when I try to press it from my ipad as written in teh instructions, nothing happens. WHy is that?

I have a similar problem.
Skype is set to Automatic proxy detection. I often switch between mobile broadband connection and an office network which uses a proxy to allow internet access.
Skype disconnects after I switch networks, and never reconnects. afterwards All other networked applications works fine afterwards.
The only way skype will reconnect is when I quit and start skype again.

BPEL process with http-POST service doesn't work

Hi OraclePM community,
i tried to test a http-POST service. The message i wanted to send is very simple:
<?xml version="1.0" encoding="UTF-8"?>
<GetFeature service="WFS">
<Query typeName="states"/>
</GetFeature>
In the POST-service wsdl:types/xsd:schema i created this new element to ingest the request-xml:
<xsd:element name="GetFeature">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Query"/>
</xsd:sequence>
<xsd:attribute name="service" use="required" type="xsd:string"/>
</xsd:complexType>
</xsd:element>
<xsd:element name="Query">
<xsd:complexType>
<xsd:attribute name="typeName" use="required" type="xsd:string"/>
</xsd:complexType>
</xsd:element>
I made the same in the bpel-service wsdl for input-variable definition. When i deployed the bpel process and went to the automatically generated client then i had only two input-boxes. One box to type in the 'service' (which is signed as string) and another box to type in the 'Query' (which is signed as anyType). But thats a wrong interpretation of my wsdl. I should type in the 'typeName' which is also a string. Therefore i get an exception at the invoke: "Argument 'GetFeatureIn' is not compatible".
O.K. i tried something different: In the client i din't choose the option 'html-form' but the option 'xml-source' and copied the request-xml in there. The result was another exception earlier (the first assign after the receive). The exception is: "error in evaluate <from>-expression in line "33". The result for the XPath-expression "/client:GetFeature" is empty"
Can anybody help me?
Kind regards
Albrecht

sure you send the right xml?
what I would try is to copy the xml from the receive, paste and extend it, and see if this works . . these errors are mostly because of no namespace defined or such ..
sure your element has the right namespace?
hth clemens
2)
here is the xml for the following schema ..
XML
<ns1:AttributetestProcessRequest xmlns:ns1="http://xmlns.oracle.com/Attributetest">
<ns1:input/>
</ns1:AttributetestProcessRequest>
schema
schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/Attributetest"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="AttributetestProcessRequest">
          <complexType>
               <sequence>
                    <element name="input" type="string"/>
               </sequence>
<attribute name="service" use="required" type="string"/>
          </complexType>
     </element>
     <element name="AttributetestProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
</schema>
it works design and runtime in 10.1.3.1
Message was edited by:
clemens.utschig

Laserjet 1020 printer doesn't work through airport express. PLEASE help me

Hi everyone. I've just bought a laserjet 1020, and though I can perfectly "see" it through the airport admin utility, there is no way to have a page printed. Works perfectly when connect it to the laptop through usb though. I have already tried every iFelix solutions, changed drivers (HP 1022, etc.), bonjour for windows, manual configurations, etc. Is there something else out there that I didn't figure out? Please help me. I'm in one of those moments where there are no more ways left to check out in google. I will really appreciate any advice.
Regards,
Martin.

There are issues with regard to HP and Apples.
I take it that your Laserjet is plugged into the XP computer and that you are tryiny to print to it over a network.
Try this:
Go to System Preferences> click on "+" to "Add Printer", at the next page click on "More printers", this should then bring up a box with the name of your network in it. It will then show the name of your Apple and that of the PC into which the LAN cable from the router is plugged, click on this PC and the next box should throw up the name of the printer, click on this, then DON"T click on ADD but on the slot with "Generic" showing, you can then scroll down the list to Laserjet, click on that and find the "Gimp" version of the driver with your printer's model number, this is the one you should ADD.
Now this may work first time, unlikely given Apple's track record of network printing foul ups; you may have it print only a 1/4 page. If this happens, try "ADDing" a driver from higher up the Laserjet range; this is what I had to do to get my Canon iP3000 to work (I use the iP8000 driver with reasonable success)
There are also CUPS+GIMP drivers in the list; with the Canon these just printed a 1/4 page of solid black, nice for the ink manufacturers, but expensive for us!
The Gimp drivers are a third party product, 2 years out of date, and for which Apple accept no responsibility.

Adobe E-mail Service doesn't work

I'm trying to send ONE photo to a friend. The HTML Email dialog box appears requesting verification. Is this really necessary? Anyway, I'm supposed to receive an email with a "Sender Verification" number. I never get an email. I press "Resend e-mail" I never get a repsonse. I do not want to use the only other option offered through "Preferences/Sharing" which is Windows Live Mail. Why has Adobe made this so difficult and how can I send this one photo?

This problem has been fixed with Elements 13 as you can setup your yahoo/gmail or other service providers' id with Elements and then send email using that email id. You can download Elements 13 trial and try that feature once.
Regards,
vaishali

Suddenly, "Search in Google" service doesn't work

When I right-click on some copy in most apps, one of the choices is "Search in Google". If I select that, it opens up Safari, and starts a Google search for the highlighted text.
Now, for no apparent reason, when I try this, I get an error box saying:
The “Search With Google” service could not be used.
(Strange that it says "Search WITH Google" when the context menu says "Search IN Google".)
This happens to me from any app I have - TextEdit, Address Book, iCal, OmniOutliner, DevonThink Pro, Preview, Safari, everything. Yesterday it worked in all those apps. Today, none.
Any idea why this is happening and what I can do about it?
Thanks in advance,
rb

HI Roger,
Trt Clearing Just Your Google History:
1. Go to the Safari Menu
2. Select Preferences
3. Select Autofill tab
4. Select the Edit button from the Other Forms Line
5. From the AutoFill list of sites select Google.com
6. Select Remove
7. Select Done
Restart your Mac.
Carolyn

Https service doesn't works through CSS

Similar Messages

Maybe you are looking for